iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1993-1-8:2005

(Main)

Eurocode 3: Design of steel structures - Part 1-8: Design of joints

Eurocode 3: Design of steel structures - Part 1-8: Design of joints

This prEN contains design methods for joints subject to predominantly static loading. NOTE: Part 1-8 of prEN 1993 is also applicable to dynamic loads, particularly wind action, if not otherwise mentioned. Fatigue design of joints, see Part 1-9 of prEN 1993. This prEN applies to steel grades S 235, S 275, S 355, S 420 and S 460.

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von Anschlüssen

(1)   EN 1993-1-8 enthält Regeln für den Entwurf, die Berechnung und die Bemessung von Anschlüssen aus Stahl mit Stahlsorten S235, S275, S355 und S460 unter vorwiegend ruhender Belastung.

Eurocode 3: Calcul des structures en acier - Partie 1-8: Calcul des assemblages

Evrokod 3: Projektiranje jeklenih konstrukcij – 1-8. del: Projektiranje spojev

Področje uporabe
Ta del evropskega standarda EN 1993 navaja metode projektiranja spojev, izpostavljenih pretežno statični obremenitvi in izdelanih iz jekel naslednjih kakovostnih razredov: S235, S275, S355 in S460.

General Information

Status
Published
Publication Date
30-Sep-2005
ICS
91.010.30 - Technical aspects
91.080.13 - Steel structures
Technical Committee
KON - Structures
Current Stage
6100 - Translation of adopted SIST standards (Adopted Project)
Start Date
01-Sep-2006
Due Date
01-Sep-2006
Completion Date
01-Sep-2006
Directive
89/106/EEC - Construction products
TP001 - Pravilnik o mehanski odpornosti in stabilnosti objektov
TP237 - Pravilnik o spodnjem ustroju železniških prog
Mandate
M/265 - Mandate to CEN for the conversion of the Eurocodes from ENV into EN concerning the structural and geotechnical design of buildings and civil engineering works
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
EN 1993-1-8:2005 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints

Relations

Replaces
SIST ENV 1993-1-1:1996/A2:2001 - Eurocode 3: Design of steel structures - Part 1-1: General - General rules and rules for buildings
Effective Date
01-Nov-2005
Replaces
SIST ENV 1993-1-1:1996 - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Effective Date
01-Nov-2005
Replaces
SIST ENV 1993-1-1:1996/A1:1996 - Eurocode 3: Design of steel structures - Part 1-1: General - General rules and rules for buildings
Effective Date
01-Nov-2005
Replaced By
SIST EN 1993-1-8:2024 - Eurocode 3 - Design of steel structures - Part 1-8: Joints
Effective Date
01-Jul-2024
Corrected By
SIST EN 1993-1-8:2005/AC:2009 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints
Effective Date
01-Dec-2009
Corrected By
SIST EN 1993-1-8:2005/AC:2006 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints
Effective Date
01-May-2006

Buy Standard

EN 1993-1-8:2005EN 1993-1-8:2005
PreviousNext
Standard
EN 1993-1-8:2005
English language
133 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1993-1-8:2005EN 1993-1-8:2005
PreviousNext
Standard – translation
EN 1993-1-8:2005
Slovenian language
135 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eurocode 3: Design of steel structures - Part 1-8: Design of jointsEvrokod 3: Projektiranje jeklenih konstrukcij – 1-8. del: Projektiranje spojevEurocode 3: Calcul des structures en acier - Partie 1-8: Calcul des assemblagesEurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von AnschlüssenTa slovenski standard je istoveten z:EN 1993-1-8:2005SIST EN 1993-1-8:2005en91.080.10Kovinske konstrukcijeMetal structures91.010.30Technical aspectsICS:SLOVENSKI
STANDARDSIST EN 1993-1-8:200501-oktober-2005







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1993-1-8
May 2005 ICS 91.010.30 Supersedes ENV 1993-1-1:1992 English version
Eurocode 3: Design of steel structures - Part 1-8: Design of joints
Eurocode 3: Calcul des structures en acier - Partie 1-8: Calcul des assemblages
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von Anschlüssen This European Standard was approved by CEN on 16 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1993-1-8:2005: E



EN 1993-1-8 : 2005 (E)
2 Contents Page
1 Introduction.8 1.1 Scope.8 1.2 Normative references.8 1.3 Distinction between Principles and Application Rules.10 1.4 Terms and definitions.10 1.5 Symbols.13 2 Basis of design.18 2.1 Assumptions.18 2.2 General requirements.18 2.3 Applied forces and moments.18 2.4 Resistance of joints.18 2.5 Design assumptions.19 2.6 Joints loaded in shear subject to impact, vibration and/or load reversal.19 2.7 Eccentricity at intersections.19 3 Connections made with bolts, rivets or pins.20 3.1 Bolts, nuts and washers.20 3.1.1 General.20 3.1.2 Preloaded bolts.
...



6/29(16.,  6,67(1
 
67$1'$5' 
RNWREHU
 




    
    
    
    
 

 (YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO3URMHNWLUDQMHVSRMHY
 
 (XURFRGH'HVLJQRIVWHHOVWUXFWXUHV±3DUW'HVLJQRIMRLQWV
 
 (XURFRG&DOFXOGHVVWUXFWXUHVHQDFLHU±3DUWLH&DOFXOGHVDVVHPEODJHV
 
 (XURFRGH%HPHVVXQJXQG.RQVWUXNWLRQYRQ6WDKOEDXWHQ±
 7HLO%HPHVVXQJYRQ$QVFKOVVHQ

 

















  



 
 5HIHUHQþQDR]QDND
 ,&6  6,67(1 VO 
 

 1DGDOMHYDQMHQDVWUDQHK,,LQ,,,LQRGGR
 


! "#$%&’#"( )*+ ! ,( #


---------------------- Page: 1 ----------------------

6,67(1
1$&,21$/1,892'

6WDQGDUG6,67(1 VO (YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO3URMHNWLUDQMH
VSRMHYLPDVWDWXVVORYHQVNHJDVWDQGDUGDLQMHLVWRYHWHQHYURSVNHPXVWDQGDUGX(1
HQ (XURFRGH'HVLJQRIVWHHOVWUXFWXUHV±3DUW'HVLJQRIMRLQWV
1$&,21$/1,35('*2925
(YURSVNL VWDQGDUG (1  MH SULSUDYLO WHKQLþQL RGERU (YURSVNHJD NRPLWHMD ]D
VWDQGDUGL]DFLMR&(17&.RQVWUXNFLMVNLHYURNRGLNDWHUHJDWDMQLãWYRMHYSULVWRMQRVWL%6,
6ORYHQVNLVWDQGDUG6,67(1MHSUHYRGHYURSVNHJDVWDQGDUGD(19
SULPHUXVSRUDJOHGHEHVHGLODVORYHQVNHJDSUHYRGDYWHPVWDQGDUGXMHRGORþLOHQL]YLUQLHYURSVNL
VWDQGDUGYDQJOHãNHPMH]LNX6ORYHQVNRL]GDMRVWDQGDUGDMHSULSUDYLOWHKQLþQLRGERU6,677&.21
.RQVWUXNFLMH
=9(=$=1$&,21$/1,0,67$1'$5',
9VWDQGDUGX6,67(1SRPHQLVNOLFHYDQMHQDHYURSVNHLQPHGQDURGQHVWDQGDUGHNLMH
YNOMXþHQRYWDHYURSVNLVWDQGDUGVNOLFHYDQMHQDHQDNRYUHGQHVORYHQVNHVWDQGDUGHQSU
(1SRPHQL6,67(1
1$&,21$/1,'2'$7(.
9VNODGXVVWDQGDUGRP(1ERSULSUDYOMHQQDFLRQDOQLGRGDWHNNVWDQGDUGX6,67(1
1DFLRQDOQLGRGDWHNYVHEXMHDOWHUQDWLYQHSRVWRSNHYUHGQRVWLLQSULSRURþLOD]DUD]UHGH
]RSRPEDPLNLNDåHMRNMHVHODKNRXYHOMDYLQDFLRQDOQDL]ELUD=DWRERQDFLRQDOQLGRGDWHN6,67(1
$YVHERYDOQDFLRQDOQRGRORþHQHSDUDPHWUHNLMLKMHWUHEDXSRUDELWLSULSURMHNWLUDQMX
VWDYELQJUDGEHQLKLQåHQLUVNLKREMHNWRYNLERGR]JUDMHQLY5HSXEOLNL6ORYHQLML
1DFLRQDOQDL]ELUDMHY6,67(1GRYROMHQDY
- VNXSLQD=DNRYLFH 
-  
-  
-  
-  
-  

26129$=$,='$-267$1'$5'$
± SULY]HPVWDQGDUGD(1
2320%(
 3RYVRG NMHU VH Y EHVHGLOX VWDQGDUGD XSRUDEOMD L]UD] ³HYURSVNL VWDQGDUG´ Y
6,67(1WRSRPHQL³VORYHQVNLVWDQGDUG´
 1DFLRQDOQLXYRGLQQDFLRQDOQLSUHGJRYRUQLVWDVHVWDYQLGHOVWDQGDUGD
 7DQDFLRQDOQLGRNXPHQWMHLVWRYHWHQ](1LQMHREMDYOMHQ]GRYROMHQMHP
   &(1
   5XHGH6WDVVDUW
   %UXVHOM
   %HOJLMD

,,

---------------------- Page: 2 ----------------------

6,67(1
 7KLVQDWLRQDOGRFXPHQWLVLGHQWLFDOZLWK(1DQGLVSXEOLVKHGZLWKWKHSHUPLVVLRQRI

   &(1
   5XHGH6WDVVDUW
   %UX[HOOHV
   %HOJLXP

,,,

---------------------- Page: 3 ----------------------

6,67(1









3UD]QDVWUDQ 
,9

---------------------- Page: 4 ----------------------


(95236.,67$1'$5' (1
(8523($167$1'$5' 
1250((8523e(11(
(8523b,6&+(1250 PDM
,&6         1DGRPHãþD(19




6ORYHQVNDL]GDMD

(YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM
GHO3URMHNWLUDQMHVSRMHY

(XURFRGH'HVLJQRIVWHHO &DOFXOGHVVWUXFWXUHVHQDFLHU± %HPHVVXQJXQG.RQVWUXNWLRQ
VWUXFWXUHV±3DUW'HVLJQRI 3DUWLH&DOFXOGHV YRQ6WDKOEDXWHQ±
MRLQWV DVVHPEODJHV 7HLO%HPHVVXQJYRQ
$QVFKOVVHQ




7DHYURSVNLVWDQGDUGMH&(1VSUHMHODSULOD

ýODQLFH&(1PRUDMRL]SROQMHYDWLQRWUDQMHSUHGSLVH&(1&(1(/(&VNDWHULPLMHSUHGSLVDQRGDPRUD
ELWLWDVWDQGDUGEUH]NDNUãQLKNROLVSUHPHPEVSUHMHWNRWQDFLRQDOQLVWDQGDUG1DMQRYHMãLVH]QDPLWHK
QDFLRQDOQLKVWDQGDUGRY]QMLKRYLPLELEOLRJUDIVNLPLSRGDWNLVHQD]DKWHYRODKNRGRELMRSUL&HQWUDOQHP
VHNUHWDULDWXDOLNDWHULNROLþODQLFL&(1
7DHYURSVNLVWDQGDUGREVWDMDYWUHKL]YLUQLKL]GDMDK DQJOHãNLIUDQFRVNLLQQHPãNL ,]GDMHYGUXJLK
MH]LNLKNLMLKþODQLFH&(1QDODVWQRRGJRYRUQRVWSUHYHGHMRLQL]GDMRWHUSULMDYLMRSUL&HQWUDOQHP
VHNUHWDULDWX&(1YHOMDMRNRWXUDGQHL]GDMH
ýODQLFH&(1VRQDFLRQDOQLRUJDQL]DVWDQGDUGH$YVWULMH%HOJLMH&LSUDýHãNHUHSXEOLNH'DQVNH
(VWRQLMH)LQVNH)UDQFLMH*UþLMH,UVNH,VODQGLMH,WDOLMH/DWYLMH/LWYH/XNVHPEXUJD0DGåDUVNH
0DOWH1HPþLMH1L]R]HPVNH1RUYHãNH3ROMVNH3RUWXJDOVNH6ORYDãNH6ORYHQLMHâSDQLMHâYHGVNH
âYLFHLQ=GUXåHQHJDNUDOMHVWYD











&(1
(YURSVNLNRPLWH]DVWDQGDUGL]DFLMR
(XURSHDQ&RPPLWWHHIR
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1993-1-5:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2024

(1) EN 1993-1-5 gives design requirements of stiffened and unstiffened plates which are subject to inplane
forces.
(2) Effects due to shear lag, in-plane load introduction and plate buckling for I-section girders and box
girders are covered. Also covered are plated structural components subject to in-plane loads as in tanks and
silos. The effects of out-of-plane loading are outside the scope of this document.
NOTE 1: The rules in this part complement the rules for class 1, 2, 3 and 4 sections, see EN 1993-1-1.
NOTE 2: For the design of slender plates which are subject to repeated direct stress and/or shear and also
fatigue due to out-of-plane bending of plate elements (breathing) see EN 1993-2 and EN 1993-6.
NOTE 3: For the effects of out-of-plane loading and for the combination of in-plane effects and out-of-plane
loading effects see EN 1993-2 and EN 1993-1-7.
NOTE 4: Single plate elements may be considered as flat where the curvature radius r satisfies:
t
a
r
2
³ (1.1)
where a is the panel width
t is the plate thickness

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-2:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-2:2024

1.1   Scope of prEN 1993-1-2
(1) This document provides rules for the design of steel structures for the accidental situation of fire exposure. This Part of EN 1993 only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to steel structures required to fulfil a loadbearing function.
(3) This document does not include rules for separating function.
(4) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(5) This document applies to structures, or parts of structures, that are within the scope of EN 1993 1 1 and are designed accordingly.
(6) This document is intended to be used in conjunction with EN 1991-1-2, EN 1993-1-1, EN 1993 1-3, EN 1993-1-4, EN 1993-1-5, EN 1993-1-6, EN 1993-1-7, EN 1993-1-8, EN 1993-1-11, EN 1993-1-13 or EN 1993-1-14.
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991(all parts) and EN 1993-1-1 apply.
(2) The design methods given in prEN 1993-1-2 are applicable if
-   the execution quality is as specified in EN 1090-2 and/or EN 1090-4, and
-   the construction materials and products used are as specified in prEN 1993-1-1:2020, Table 5.1 and Table 5.2 and in prEN 1993-1-3:2022, Table 5.1 and Table 5.2, or in the relevant material and product specifications.
(3) In addition to the general assumptions of EN 1990 the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-8:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-8: Joints
EN 1993-1-8:2024

1.1   Scope of EN 1993 1 8
(1) This document gives design methods for the design of joints subject to predominantly static loading using all steel grades from S235 up to and including S700 unless otherwise stated in individual clauses.
1.2   Assumptions
(1) The assumptions of EN 1990 and EN 1993-1-1 apply to this document.
(2) The design methods given in this part of EN 1993 are applicable when the quality of construction is as specified in EN 1090 2 or EN 1090 4, and that the construction materials and products used are those specified in the relevant parts of EN 1993, or in the relevant material and product specifications.

  • Standard
    216 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    197 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-13:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-13: Beams with large web openings
EN 1993-1-13:2024

1.1   Scope of prEN 1993-1-13
1.1.1   General
(1) This document gives supplementary provisions that extend the application of EN 1993-1-1 and EN 1993 1 5 to the design of rolled and welded steel sections with various shapes of web openings. The following cases are considered:
—   rolled or welded beams with widely spaced web openings;
—   rolled or welded beams with closely spaced web openings;
—   cellular beams with circular openings made by cutting and re-welding two parts of steel sections that may be different in dimensions;
—   beams with hexagonal and sinusoidal openings made by cutting and re-welding two parts of steel sections that may be different in dimensions.
(2) This document applies to uniform members with I or H profiles, which are symmetric about the weak axis. It does not apply to non-prismatic or curved beams although the same principles can apply.
(3) This document applies to steel beams with web openings that are subjected to sagging (positive) and to beams that are also subjected to hogging (negative) bending moments.
(4) This document covers the verification of the resistance at the openings and their effect on the global behaviour of the beam, including lateral torsional buckling.
(5) Alternative methods are presented for beams with circular openings and with sinusoidal openings in which the forces and resistances are calculated by increments around or along the openings and which are suitable for computer methods.
(6) This document applies to web slenderness, hw/tw, not exceeding 121ε. The local checks at and between adjacent openings apply to web slenderness up to this limit. Tension field action of plate girders is not part of the scope.
NOTE   The limit of 121ε corresponds to the section classification for a symmetric steel section and is used as a convenient limit for the application of this document, including asymmetric sections. The material parameter ε is defined in prEN 1993-1-1:2020, 5.2.5 (2).
(7) This document does not cover fatigue. In case of fatigue, EN 1993-1-9 applies.
(8) This document does not cover fire design. For the design in case of fire, EN 1993-1-2 applies.
(9) This document does not cover the buckling verification of members with web openings under axial force.
1.1.2   Shapes of openings
(1) The different shapes of openings that are considered in this document are shown in Figure 1.1.
Figure 1.1...
1.1.3   Stiffened openings
(1) This document also covers openings in the web of beams that are reinforced by longitudinal stiffeners and/or transverse stiffeners on one or both sides of the web, see Figure 1.2.
NOTE   The National Annex can give rules for alternative types of stiffener.
Figure 1.2...
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991 (all parts) and EN 1993-1-1 apply.
(2) The design methods given in EN 1993-1-13 are applicable if
—   the execution quality is as specified in EN 1090-2, and
—   the construction materials and products used are as specified in the relevant parts of EN 1993 (all parts), or in the relevant material and product specifications.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-3:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting
EN 1993-1-3:2024

1.1   Scope of prEN 1993-1-3
(1) This document provides rules for structural design of cold-formed steel members and sheeting.
(2) This document applies to cold-formed steel products made from coated or uncoated hot- or cold-rolled sheet or strip, which have been cold-formed by processes such as roll-forming or press braking. It also covers sheeting and members which are curved during fabrication by continuous bending or roll-forming. Sheeting which has the curvature created by crushing the inner flanges is not included. This document is also applicable to the design of profiled steel sheeting for composite steel and concrete slabs at the construction stage, see EN 1994. The execution of steel structures made of cold-formed steel members and sheeting is covered in EN 1090 4. Provisions for bolted connections are provided in EN 1090 2.
NOTE   The rules in prEN 1993 1 3 complement the rules in other parts of EN 1993 1.
(3) Methods are also given for stressed-skin design, using steel sheeting as a structural diaphragm.
(4) This document does not apply to cold-formed circular and rectangular structural hollow sections supplied to EN 10219, for which reference is made to EN 1993 1 1 and EN 1993 1 8.
(5) This document provides methods for design by calculation and for design assisted by testing. The methods for design by calculation apply only within the stated ranges of material properties and geometric proportions, for which sufficient experience and test evidence is available. These limitations do not apply to design assisted by testing.
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991 (all parts) and EN 1993 1 1 apply.
(2) The design methods given in prEN 1993 1 3 are applicable if:
-   the execution quality is as specified in EN 1090 4, the execution quality of bolted connections is as specified in EN 1090 2, and
-   the construction materials and products are as specified in the relevant parts of EN 1993 (all parts), or in the relevant material and product specifications.
(2) EN 1993 is intended to be used in conjunction with:
-   the parts of EN 1992 to EN 1999 where steel structures or steel components are referred to within those documents;
-   EN, EAD and ETA standards for construction products relevant to steel structures.

  • Standard
    209 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    208 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 1993-1-101:2023(Main)
Eurocode 3: Design of steel structures - Part 1-101: Alternative interaction method for members in bending and compression
CEN/TS 1993-1-101:2022

(1) This document provides an alternative method for the stability verification of steel members under compression axial force and bending moment, with reference to EN 1993 1 1.
NOTE   For the applicability of this document, see Clause 4.
(2) The method given in this document applies to uniform steel members with double symmetric cross-section under axial compression force and bi-axial bending.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-1:2023(Main)
Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1:2022

1.1   Scope of EN 1993 1 1
(1) EN 1993 1 1 gives basic design rules for steel structures.
(2) It also gives supplementary provisions for the structural design of steel buildings. These supplementary provisions are indicated by the letter "B" after the paragraph number, thus (  )B.
1.2   Assumptions
(1) The assumptions of EN 1990 apply to EN 1993 1 1.
(2) EN 1993 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), the parts of EN 1992 to EN 1999 where steel structures or steel components are referred to within those documents, EN 1090 2, EN 1090 4 and ENs, EADs and ETAs for construction products relevant to steel structures.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-4:2007/A2:2021(Amendment)
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-4:2006/A2:2020

DOP of 12 months

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-5:2007/A2:2019(Amendment)
Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5:2006/A2:2019

EN 1993-1-5 gives design requirements of stiffened and unstiffened plates which are subject to inplane forces. Effects due to shear lag, in-plane load introduction and plate buckling for I-section girders and box girders are covered. Also covered are plated structural components subject to in-plane loads as in tanks and silos. The effects of out-of-plane loading are outside the scope of this document.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1993-1-6:2007/A1:2017(Amendment)
Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-6:2007/A1:2017

DOP of 12 months!

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day