SIST EN ISO/IEEE 11073-10407:2023

SLOVENSKI STANDARD
SIST EN ISO/IEEE 11073-10407:2023
01-maj-2023
Nadomešča:
SIST EN ISO 11073-10407:2011
Zdravstvena informatika - Interoperabilnost naprav - 10407. del: Komunikacija
osebnih medicinskih naprav - Specialne naprave - Kontrolna naprava za merjenje
krvnega tlaka (ISO/IEEE 11073-10407:2022)
Health informatics - Device interoperability - Part 10407: Personal health device
communication - Device specialization - Blood pressure monitor (ISO/IEEE 11073-
10407:2022)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10407: Gerätespezifikation - Blutdruckmonitor (ISO/IEEE 11073-10407:2022)
Informatique de santé - Interopérabilité des dispositifs - Partie 10407: Communication
entre dispositifs de santé personnels - Spécialisation des dispositifs - Moniteur de
pression sanguine (ISO/IEEE 11073-10407:2022)
Ta slovenski standard je istoveten z: EN ISO/IEEE 11073-10407:2022
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO/IEEE 11073-10407:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO/IEEE 11073-10407:2023

---------------------- Page: 2 ----------------------
SIST EN ISO/IEEE 11073-10407:2023


EN ISO/IEEE 11073-
EUROPEAN STANDARD
10407
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2022
ICS 35.240.80 Supersedes EN ISO 11073-10407:2011
English Version

Health informatics - Device interoperability - Part 10407:
Personal health device communication - Device
specialization - Blood pressure monitor (ISO/IEEE 11073-
10407:2022)
Informatique de santé - Interopérabilité des dispositifs Medizinische Informatik - Kommunikation von Geräten
- Partie 10407: Communication entre dispositifs de für die persönliche Gesundheit - Teil 10407:
santé personnels - Spécialisation des dispositifs - Gerätespezifikation - Blutdruckmonitor (ISO/IEEE
Moniteur de pression sanguine (ISO/IEEE 11073- 11073-10407:2022)
10407:2022)
This European Standard was approved by CEN on 4 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEEE 11073-10407:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
EN ISO/IEEE 11073-10407:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
EN ISO/IEEE 11073-10407:2022 (E)
European foreword
This document (EN ISO/IEEE 11073-10407:2022) has been prepared by Technical Committee ISO/TC
215 "Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics”
the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11073-10407:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10407:2022 has been approved by CEN as EN ISO/IEEE 11073-
10407:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO/IEEE 11073-10407:2023

---------------------- Page: 6 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
INTERNATIONAL ISO/IEEE
STANDARD 11073-10407
Second edition
2022-12
Health informatics — Device
interoperability —
Part 10407:
Personal health device communication
— Device specialization — Blood
pressure monitor
Informatique de santé — Interopérabilité des dispositifs —
Partie 10407: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de pression sanguine
Reference number
ISO/IEEE 11073-10407:2022(E)
© IEEE 2020

---------------------- Page: 7 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
 © IEEE 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-10407 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-10407-2020) and drafted in accordance with its editorial
rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development
Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health
informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073-10407:2010), which has been
technically revised.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO/IEEE 11073-10407:2023

---------------------- Page: 10 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
IEEE Std 11073-10407™-2020
(Revision of IEEE Std 11073-10407-2008)
Health informatics—Personal health device communication
Part 10407: Device specialization—
Blood pressure monitor
Developed by the

IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society


Approved 30 January 2020

IEEE SA Standards Board

---------------------- Page: 11 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of communication between
personal telehealth blood pressure monitor devices and compute engines (e.g., cell phones,
personal computers, personal health appliances, and set top boxes) in a manner that enables
plug-and-play interoperability. It leverages appropriate portions of existing standards including
ISO/IEEE 11073 terminology, information models, application profile standards, and transport
standards. It specifies the use of specific term codes, formats, and behaviors in telehealth
environments restricting optionality in base frameworks in favor of interoperability. This standard
defines a common core of communication functionality for personal telehealth blood pressure
monitors.
Keywords: blood pressure monitor, IEEE 11073-10407™, medical device communication,
personal health devices
•
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2020 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 30 April 2020. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-1-5044-6460-4 STD24062
Print: ISBN 978-1-5044-6461-1 STDPD24062
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 12 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)

Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.

3
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 13 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)

Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.

4
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 14 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)

Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at https://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at https://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.

5
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 15 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)

Participants
At the time this IEEE standard was completed, the Personal Health Device Working Group had the
following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair

Karsten Aalders Cory Condek Robert Hall
Charles R. Abbruscato Todd H. Cooper Shu Han
Nabil Abujbara David Cornejo Nathaniel Hamming
Maher Abuzaid Douglas Coup Rickey L. Hampton
James Agnew Nigel Cox Sten Hanke
Manfred Aigner Hans Crommenacker Aki Harma
Jorge Alberola Tomio Crosley Jordan Hartmann
David Aparisi Allen Curtis Kai Hassing
Lawrence Arne Jesús Daniel Trigo Wolfgang Heck
Diego B. Arquillo David Davenport Nathaniel Heintzman
Serafin Arroyo Russell Davis Charles Henderson
Muhammad Asim Sushil K. Deka Jun-Ho Her
Kit August Ciro de la Vega Helen B. Hernandez
Doug Baird Pedro de-las-Heras-Quiros Timothy L. Hirou
David Baker Allen Hobbs
Jim Dello Stritto
Anindya Bakshi
Kent Dicks Alex Holland
Ananth Balasubramanian Hyoungho Do Arto Holopainen
Sunlee Bang Jonathan Dougherty Kris Holtzclaw
M. Jonathan Barkley Xiaolian Duan Xinyi Hong
Gilberto Barrón Sourav Dutta Robert Hoy
David Bean Jakob Ehrensvard Di Hu
John Bell Fredrik Einberg Anne Huang
Olivia Bellamou-Huet Javier Escayola Calvo Ron Huby
Rudy Belliardi Mark Estes David Hughes
Daniel Bernstein Leonardo Estevez Robert D. Hughes
George A. Bertos Bosco T. Fernandes Jiyoung Huh
Chris Biernacki Christoph Fischer Hugh Hunter
Ola Björsne Morten Flintrup Philip O. Isaacson
Thomas Blackadar Joseph W. Forler Atsushi Ito
Thomas Bluethner Russell Foster Michael Jaffe
Douglas P. Bogia Eric Freudenthal Praduman Jain
Xavier Boniface Matthias Frohner
Hu Jin
Ken Fuchs
Shannon Boucousis Danny Jochelson
Jing Gao
Julius Broma Akiyoshi Kabe
Lyle G. Bullock, Jr. Marcus Garbe Steve Kahle
Bernard Burg John Garguilo Tomio Kamioka
Chris Burns Rick Geimer James J. Kang
Jeremy Byford-Rew Igor Gejdos Kei Kariya
Satya Calloji Ferenc Gerbovics Andy Kaschl
Carole C. Carey Alan Godfrey Junzo Kashihara
Craig Carlson Nicolae Goga Colin Kennedy
Santiago Carot-Nemesio Julian Goldman Ralph Kent
Randy W. Carroll Raul Gonzalez Gomez Laurie M. Kermes
Seungchul Chae Chris Gough Ahmad Kheirandish
Peggy Chien Channa Gowda Junhyung Kim
David Chiu Charles M. Gropper Minho Kim
Jinyong Choi Amit Gupta Min-Joon Kim
Chia-Chin Chong Jeff Guttmacher Taekon Kim
Rasmus Haahr
Saeed A. Choudhary Tetsuya Kimura
Christian Habermann
Jinhan Chung Alfred Kloos
John A. Cogan Michael Hagerty Jeongmee Koh
John T. Collins Jerry Hahn Jean-Marc Koller

6
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 16 ----------------------
SIST EN ISO/IEEE 11073-10407:2023
ISO/IEEE 11073-10407:2022(E)

John Koon BegonyaOtal Nicholas Steblay
Patty Krantz Lars Steubesand
Marco Paleari
Raymond Krasinski John (Ivo) Stivoric
Bud Panjwani
Alexander Kraus Carl Pantiskas Raymond A. Strickland
Ramesh Krishna Harry P. Pappas Chandrasekaran Subramaniam
Geoffrey Kruse Hanna Park Hermanni Suominen
Falko Kuester Jong-Tae Park Lee Surprenant
Rafael Lajara Myungeun Park Ravi Swami
Pierre Landau Soojun Park Ray Sweidan
Jaechul Lee Phillip E. Pash Na Tang
Jong-Muk Lee Tong-Bi Pei Haruyuyki Tatsumi
Kyong Ho Lee Soren Petersen Isabel Tejero
Rami Lee James Petisce Tom Thompson
Sungkee Lee Peter Piction Jonas Tirén
Woojae Lee Michael Pliskin Janet Traub
Qiong Li Varshney Prabodh Gary Tschautscher
Xiangchen Li Jeff Price Masato Tsuchid
Yingsong Li Ken Tubman
Harald Prinzhorn
Zhuofang Li Akib Uddin
Harry Qiu
Patrick Lichter
Tanzilur Rahman Sunil Unadkat
Lin Lin Phillip Raymond Fabio Urbani
Jisoon Lim Terrie Reed Philipp Urbauer
Joon-Ho Lim Barry Reinhold Laura Vanzago
Liang Liu Brian Reinhold Alpo Värri
Xiaoming Liu Melvin I. Reynolds Andrei Vasilateanu
Wei-Jung Lo John G. Rhoads Dalimar Velez
Charles Lowe Jeffrey S. Robbins Martha Velezis
Don Ludolph Chris Roberts Rudi Voon
Christian Luszick Moskowitz Robert Barry Vornbrock
Bob MacWilliams Stefan Robert Isobel Walker
Srikkanth Madhurbootheswaran Scott M. Robertson David Wang
Miriam L. Makhlouf Timothy Robertson Linling Wang
Romain Marmot David Rosales Jerry P. Wang
Sandra Martinez Yao Wang
Bill Saltzstein
Miguel Martínez de Espronceda Giovanna Sannino Yi Wang
Cámara Jose A. Santos-Cadenas
Steve Warren
Stefan Sauermann
Peter Mayhew Fujio Watanabe
John Sawyer
Jim McCain Toru Watsuji
László Meleg AloisSchloegl Kathleen Wible
Alexander Mense Paul S. Schluter Paul Williamson
Behnaz Minaei Mark G. Schnell Jan Wittenber
Jinsei Miyazaki Richard A. Schrenker Jia-Rong Wu
Erik Moll Antonio Scorpiniti Will Wykeham
Darr Moore KwangSeok Seo Ariton Xhafa
Chris Morel Riccardo Serafin Ricky Yang
Carsten Mueglitz Sid Shaw Melanie S. Yeung
Soundharya Nagasubramanian Frank Shen Qiang Yin
Alex Neefus Min Shih Done-Sik Yoo
Trong-Nghia Nguyen-Dobinsky Mazen Shihabi Zhi Yu
Michael E. Nidd Redmond Shouldice Jianchao Zeng
Jim Niswander Sternly K. Simon Jason Zhang
Hiroaki Niwamoto Marjorie Skubic
Jie Zhao
Robert Smith
Thomas Norgall Thomas Zhao
Ivan Soh
Yoshiteru Nozoe Yuanhong Zhong
Motoki Sone
Abraham Ofek Miha Zoubek
Brett Olive Emily Sopensky Szymon Zyskoter
Rajagopalan Srinivasan


7
Copyright © 2020 IEEE. Al
...