oSIST prEN 18233:2025

SLOVENSKI STANDARD
01-november-2025
Ugotavljanje karakteristične nosilnosti in karakteristične togosti ploščatih sidrnih
plošč v kompletu ETICS
Determination of characteristic load resistance and characteristic plate stiffness of plate
anchors in the ETICS kit
Wärmedämmstoffe für das Bauwesen - Bestimmung der charakteristischen Tragfähigkeit
und der charakteristischen Steifigkeit von Tellerdübeln
Détermination de la résistance caractéristique à la charge et de la raideur caractéristique
des chevilles à rosace dans le kit ETICS
Ta slovenski standard je istoveten z: prEN 18233
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2025
ICS 91.100.60
English Version
Determination of characteristic load resistance and
characteristic plate stiffness of plate anchors in the ETICS
kit
Détermination de la résistance caractéristique à la Wärmedämmstoffe für das Bauwesen - Bestimmung
charge et de la raideur caractéristique des chevilles à der charakteristischen Tragfähigkeit und der
rosace dans le kit ETICS charakteristischen Steifigkeit von Tellerdübeln
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18233:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
3.1 Terms and definition . 4
3.2 Symbols and units . 4
4 Principles . 5
5 Test equipment/apparatus . 5
6 Test specimen . 5
6.1 Preparing of the test specimen . 5
6.2 Numbers of the test specimen . 6
6.3 Conditioning of plate anchors . 6
7 Test conditions . 7
8 Procedure . 7
9 Calculation and expression of results . 7
9.1 Characteristic load resistance . 7
9.2 Characteristic plate stiffness . 7
10 Test report . 9

European foreword
This document (prEN 18233:2025) has been prepared by Technical Committee CEN/TC 88 “Thermal
insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
1 Scope
This document covers the determination of the characteristic load resistance F and the characteristic
p
plate stiffness k of plate anchors.
p
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 9229:2007, Thermal insulation — Vocabulary (ISO 9229:2007)
ISO 12491:2019, Statistical methods for quality control of building materials and components
(ISO 12491:2019)
EN 17237, Thermal insulation products for buildings — External thermal insulation composite systems
with renders (ETICS) — Specification
3 Terms and definitions
3.1 Terms and definition
For the purposes of this document, the terms and definitions given in EN ISO 9229:2007 and EN 17237
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: av
...