SIST EN ISO 23153-2:2020
(Main)Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyetheretherketone (PEEK) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.
Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PEEK moulding and extrusion materials are listed.
In order to obtain reproducible and comparable test results, the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
Kunststoffe - Polyetheretherketone (PEEK)-Werkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung der Eigenschaften (ISO 23153-2:2020)
Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die Prüfverfahren, die zur Bestimmung der Eigenschaften von Polyetheretherketon- (PEEK)-Form- und Extrusionswerkstoffen anzuwenden sind, fest. Die Anforderungen an die Behandlung des Prüfmaterials und an das Konditionieren des Prüfmaterials sowohl vor dem Formen als auch der Probekörper vor der Prüfung sind angegeben.
Verfahren und Bedingungen für die Herstellung von Probekörpern sowie Verfahren für die Bestimmung der Eigenschaften der Werkstoffe, aus denen diese Probekörper hergestellt werden, sind ebenfalls angegeben. Eigenschaften und Prüfverfahren, die geeignet und notwendig sind, um PEEK-Form- und Extrusions¬werkstoffe zu charakterisieren, sind aufgeführt.
Um reproduzierbare und vergleichbare Prüfergebnisse zu erhalten, werden die hier festgelegten Verfahren für die Herstellung und Konditionierung, die Probekörpermaße und die Prüfverfahren angewendet. Die ermittelten Werte sind nicht unbedingt identisch mit denen, die an Probekörpern mit anderen Maßen oder an mit anderen Verfahren hergestellten Probekörpern erhalten wurden.
Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 23153-2:2020)
Le présent document spécifie les méthodes de préparation des éprouvettes et les méthodes d'essai à utiliser pour déterminer les propriétés des matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion. Les exigences relatives à la manipulation du matériau d'essai et au conditionnement du matériau d'essai avant moulage et des éprouvettes avant essai sont indiquées.
Les modes opératoires et les conditions nécessaires à la préparation des éprouvettes, ainsi que les modes opératoires de mesure des propriétés des matériaux à partir desquels les éprouvettes sont obtenues sont également donnés. Les propriétés et méthodes d'essai qui sont utiles et nécessaires pour caractériser les matériaux pour moulage et extrusion à base de PEEK sont énumérées.
Dans le but d'obtenir des résultats d'essai reproductibles et comparables, les méthodes de préparation et de conditionnement, les dimensions d'éprouvette ainsi que les modes opératoires d'essai spécifiés ici sont utilisés. Les valeurs déterminées ne seront pas nécessairement identiques à celles obtenues en utilisant des éprouvettes de dimensions différentes ou préparées selon des modes opératoires différents.
Polimerni materiali - Materiali na osnovi polietereterketona (PEEK) za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 23153-2:2020)
General Information
- Status
- Published
- Public Enquiry End Date
- 14-Apr-2019
- Publication Date
- 06-Feb-2020
- Technical Committee
- IPMA - Polimer materials and products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Feb-2020
- Due Date
- 12-Apr-2020
- Completion Date
- 07-Feb-2020
Overview
SIST EN ISO 23153-2:2020 is an international standard specifying the preparation of test specimens and the determination of properties for polyetheretherketone (PEEK) moulding and extrusion materials. Developed by CEN in collaboration with ISO technical committees, this document establishes consistent and reproducible procedures for handling, conditioning, and testing PEEK plastics to ensure reliable and comparable results. The standard focuses on injection-moulded specimens and provides detailed guidelines on material handling, conditioning requirements, specimen dimensions, and various test methods necessary to characterize PEEK materials.
Key Topics
Scope and Purpose
The standard defines methods for preparing PEEK test specimens and specifies the testing protocols to determine mechanical, thermal, rheological, and physical properties of these materials. It includes guidance for conditioning both the raw material and test specimens to maintain consistency.Specimen Preparation
- Injection moulding is mandatory for specimen preparation, using controlled conditions to avoid processing inconsistencies.
- Material must be pre-dried to a moisture content of less than 0.05% following ISO 15512 to ensure optimal moulding and material integrity.
- Injection moulding parameters such as melt temperature (360 - 400°C), mould temperature (175 - 210°C), injection velocity, cooling time, and total cycle time are precisely specified to standardize specimen quality.
Conditioning of Test Specimens
- Unfilled PEEK specimens are conditioned at 23°C ± 2°C for a minimum of 16 hours without relative humidity control.
- Specimens containing moisture-sensitive fillers or additives require conditioning at controlled humidity of 50 ± 10%.
This ensures that moisture or environmental factors do not influence test results.
Property Determination
The standard lists essential properties and corresponding test methods adapted from ISO 10350-1 and related standards:- Rheological Properties: Melt mass-flow rate (MFR) and moulding shrinkage (parallel and normal to flow).
- Mechanical Properties: Tensile modulus, yield stress and strain, stress and strain at break, flexural modulus and strength, Charpy impact strength (notched and unnotched).
- Thermal Properties: Glass transition temperature, melting and crystallization temperatures, thermal expansion coefficients.
Specific test standards referenced include ISO 1133-1 for melt flow rate, ISO 527 for tensile properties, ISO 178 for flexural testing, and ISO 179-1 for impact testing.
Applications
SIST EN ISO 23153-2:2020 is essential for manufacturers, material scientists, and quality control professionals working with PEEK used in high-performance plastic components. Given PEEK's applications in aerospace, automotive, medical devices, and electrical engineering, standardized test methods facilitate:
Material Specification and Verification
Ensuring that supplied PEEK materials meet required mechanical and thermal performance criteria.Research and Development
Supporting the development of new PEEK grades and composites by providing reliable data on material properties under defined conditions.Quality Assurance
Helping producers maintain consistency in packed product quality by adhering to repeatable specimen preparation and testing protocols.Regulatory Compliance
Enabling documentation and certification processes that reference internationally recognized test results for PEEK materials.
Related Standards
To fully implement SIST EN ISO 23153-2:2020 and interpret test data accurately, familiarity with the following standards is recommended:
- ISO 23153-1: Designation system and basis for specifications of PEEK moulding and extrusion materials.
- ISO 1133-1: Methods for determining melt mass-flow and volume-flow rates of thermoplastics.
- ISO 294 Series: Injection moulding of thermoplastic material test specimens.
- ISO 527-1 and ISO 527-2: Tensile test methods for plastics.
- ISO 178: Flexural properties measurement.
- ISO 179-1: Charpy impact testing procedures.
- ISO 15512: Methods for moisture content determination in plastics.
- ISO 20753: Specification for plastics test specimens.
- IEC standards: For related electrical and thermal property assessments relevant to insulating applications of PEEK.
SIST EN ISO 23153-2:2020 provides a rigorous framework for consistent preparation and testing of PEEK moulding and extrusion materials, supporting industries requiring precise characterization of this advanced thermoplastic polymer. The standard aids in improving product reliability, accelerating innovation, and harmonizing quality benchmarks internationally.
Frequently Asked Questions
SIST EN ISO 23153-2:2020 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)". This standard covers: This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyetheretherketone (PEEK) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PEEK moulding and extrusion materials are listed. In order to obtain reproducible and comparable test results, the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyetheretherketone (PEEK) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PEEK moulding and extrusion materials are listed. In order to obtain reproducible and comparable test results, the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
SIST EN ISO 23153-2:2020 is classified under the following ICS (International Classification for Standards) categories: 83.080.20 - Thermoplastic materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 23153-2:2020 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2020
Polimerni materiali - Materiali na osnovi polietereterketona (PEEK) za oblikovanje
in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO
23153-2:2020)
Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties (ISO 23153-2:2020)
Kunststoffe - Polyetheretherketone (PEEK)-Werkstoffe - Teil 2: Herstellung von
Probekörpern und Bestimmung der Eigenschaften (ISO 23153-2:2020)
Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et
extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO
23153-2:2020)
Ta slovenski standard je istoveten z: EN ISO 23153-2:2020
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 23153-2
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 83.080.20
English Version
Plastics - Polyetheretherketone (PEEK) moulding and
extrusion materials - Part 2: Preparation of test specimens
and determination of properties (ISO 23153-2:2020)
Plastiques - Matériaux à base de polyétheréthercétone Kunststoffe - Polyetheretherketone (PEEK)-Werkstoffe
(PEEK) pour moulage et extrusion - Partie 2: - Teil 2: Herstellung von Probekörpern und
Préparation des éprouvettes et détermination des Bestimmung der Eigenschaften (ISO 23153-2:2020)
propriétés (ISO 23153-2:2020)
This European Standard was approved by CEN on 12 December 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23153-2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 23153-2:2020) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 23153-2:2020 has been approved by CEN as EN ISO 23153-2:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 23153-2
First edition
2020-01
Plastics — Polyetheretherketone
(PEEK) moulding and extrusion
materials —
Part 2:
Preparation of test specimens and
determination of properties
Plastiques — Matériaux à base de polyétheréthercétone (PEEK) pour
moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
Reference number
ISO 23153-2:2020(E)
©
ISO 2020
ISO 23153-2:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 23153-2:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preparation of test specimens . 3
4.1 General . 3
4.2 Treatment of material before moulding . 3
4.3 Injection moulding . 3
5 Conditioning of test specimens . 3
6 Determination of properties . 3
ISO 23153-2:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9,
Thermoplastic materials.
A list of all parts in the ISO 23153 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
INTERNATIONAL STANDARD ISO 23153-2:2020(E)
Plastics — Polyetheretherk
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...