iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50144-2-5:2000

(Main)

Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives

Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives

This clause of Part 1 is applicable except as follows: 1.1. Addition: This standard applies to all types of circular saws for cutting wood and similar materials and to circular knives. These requirements do not cover circular saws and circular knives when mounted in a support for use as fixed tools. This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere Anforderungen für Kreissägen und Kreismesser

Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les scies circulaires et les couteaux circulaires

Varnost električnih ročnih orodij - 2-5. del: Posebne zahteve za krožne žage in krožne nože

General Information

Status
Withdrawn
Publication Date
31-Aug-2000
Withdrawal Date
16-Jul-2009
ICS
25.080.60 - Sawing machines
25.140.20 - Electric tools
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Jul-2009
Due Date
29-Jul-2009
Completion Date
17-Jul-2009
Directive
98/37/EC - Machinery
Mandate
M/083 - Machinery
Ref Project
EN 50144-2-5:1999 - Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

Relations

Replaced By
SIST EN 60745-2-5:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws
Effective Date
29-Jan-2023
Replaced By
SIST EN 60745-2-5:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws
Effective Date
07-Jun-2022
Replaces
SIST EN 50144-2-5:1999 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives
Effective Date
29-Jan-2023
Replaces
SIST EN 50144-2-5:1999 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives
Effective Date
06-May-2014

Buy Standard

EN 50144-2-5:2000EN 50144-2-5:2000
PreviousNext
Standard
EN 50144-2-5:2000
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50144-2-5:2000
01-september-2000
1DGRPHãþD
SIST EN 50144-2-5:1999
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DNURåQHåDJHLQ
NURåQHQRåH
Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for
circular saws and circular knives
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere
Anforderungen für Kreissägen und Kreismesser
Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les
scies circulaires et les couteaux circulaires
Ta slovenski standard je istoveten z: EN 50144-2-5:1999
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50144-2-5:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 2 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 3 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 4 ----------------------

SIST EN 50144-2-5:2000

---------------------- Page: 5 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62841-3-7:2021(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws
EN IEC 62841-3-7:2021

This document applies to transportable wall saws guided by a track guiding system intended
for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar
material by means of a diamond wheel. The rated speed of the diamond wheel does not
exceed a peripheral speed of 100 m/s at rated capacity.
This document does not apply to transportable wall saws that are intended to be left unattended
while performing an operation.
This document does not apply to transportable wall saws that employ hydraulic systems.
This document does not apply to hand-held cut-off machines.
NOTE 101 Hand-held cut-off machines will be covered by a future part of IEC 62841-2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-3-7:2021/A11:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws
EN IEC 62841-3-7:2021/A11:2021

This standard applies to transportable wall saws guided by a track guiding system intended for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar material by means of a diamond wheel.  The rated speed of the diamond wheel does not exceed a peripheral speed of 100 m/s at rated capacity.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-11:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015/A1:2018)
EN 62841-2-11:2016/A1:2020

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confirmed that the request for assessment will be accepted but asked to  issue a new request by CCMC. CCMC made a new request. The indicative deadline to receive it: 2019-06-12
2019-04-19 JF: EC clarified that HAS Consutlants will carry out the assessment of the corrected Annex ZZ. NEXT ACTION: HAS CONSULTANT ASSESSMENT EXPECTED BY 2019-05-23.
2019-01-30 Assessment request rejected by HAS Consultants on the grounds that it is a second requset at this stage. CCMC asked the EC to clarify.
2019-

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-11:2016(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (jig and sabre saws) (IEC 62841-2-11:2015)
EN 62841-2-11:2016

This standard applies to reciprocating saws such as jig saws and sabre saws.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60745-2-20:2009(Main)
Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for band saws
EN 60745-2-20:2009

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to band saws.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60745-2-5:2003/OprA2:2004(Main)
Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws
EN 60745-2-5:2003/prA2

Work incorporated in IEC 60745-2-5:200X (61F/643/FDIS) / prEN 60745-2-5:200X (pr=16378) * Standstill maintained

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-1:2020/oprA1:2023(Amendment)
Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
EN 62841-4-1:2020/prA1:2022

2022-11-29: Common mods to this A1 are included in EN 62841-4-1:2020/prAB (PR=77082)
D164/C043: DOW = DOR + 48 months

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-4-1:2020/oprAB:2023(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
EN 62841-4-1:2020/prAB

2022-11-29: This prAB includes common mods to EN 62841-4-1:2020/A1 (PR=76982)
D164/C043: DOW = DOR + 48 months

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-11:2016/oprAB:2023(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-11:2016/prAB:2023

This part of EN 62841 applies to reciprocating saws such as jig saws and sabre saws.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-1:2014/A1:2021(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws
EN 62841-3-1:2014/A1:2021

No scope available

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day