Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020)

This document specifies Procedure A, using manual glass viscometers, and Procedure B, using glass
capillary viscometers in an automated assembly, for the determination of the kinematic viscosity, ν,
of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of
liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, η,
is obtained by multiplying the measured kinematic viscosity by the density, ρ, of the liquid. The range
of kinematic viscosities covered in this test method is from 0,2 mm2/s to 300 000 mm2/s over the
temperature range –20 °C to +150 °C.
NOTE The result obtained from this document is dependent upon the behaviour of the sample and is intended
for application to liquids for which primarily the shear stress and shear rates are proportional (Newtonian flow
behaviour). If, however, the viscosity varies significantly with the rate of shear, different results can be obtained
from viscometers of different capillary diameters. The procedure and precision values for residual fuel oils,
which under some conditions exhibit non-Newtonian behaviour, have been included.

Mineralölerzeugnisse - Durchsichtige und undurchsichtige Flüssigkeiten - Bestimmung der kinematischen Viskosität und Berechnung der dynamischen Viskosität (ISO 3104:2020)

Dieses Dokument legt Verfahren A mit manuellen Glas-Viskosimetern und Verfahren B mit Glas-Kapillarviskosimetern in einer automatisierten Apparatur zur Bestimmung der kinematischen Viskosität ν von flüssigen, sowohl durchsichtigen als auch undurchsichtigen, Mineralölerzeugnissen fest. Dabei wird die Durchflusszeit eines Flüssigkeitsvolumens unter dem Einfluss der Schwerkraft durch ein kalibriertes Glas-Kapillarviskosimeter gemessen. Die dynamische Viskosität η wird erhalten, indem die gemessene kinematische Viskosität mit der Dichte ρ der Flüssigkeit multipliziert wird. Die mit diesem Prüfverfahren abgedeckten kinematischen Viskositäten liegen im Bereich von 0,2 mm2/s bis 300 000 mm2/s über den Temperaturbereich −20 °C bis +150 °C.
ANMERKUNG Das mit diesem Dokument erhaltene Ergebnis hängt vom Verhalten der Probe ab; die Norm ist für Flüssigkeiten vorgesehen, für die in erster Linie Schubspannung und Schergeschwindigkeit proportional sind (Newtonsches Fließverhalten). Wenn sich jedoch die Viskosität signifikant mit der Schergeschwindigkeit ändert, können unterschiedliche Ergebnisse mit Viskosimetern unterschiedlichen Kapillardurchmessers erhalten werden. Das Verfahren und Präzisionswerte für Rückstandsheizöle, die unter gewissen Bedingungen nicht-newtonsches Verhalten zeigen, wurden ebenfalls aufgenommen.
WARNUNG - Dieses Dokument beansprucht nicht, alle damit verbundenen Sicherheitsprobleme, soweit vorhanden, zu behandeln. Es liegt in der Verantwortung des Anwenders dieses Dokuments, vor der Anwendung dieses Dokuments geeignete Maßnahmen für die Sicherheit und den Gesundheitsschutz des Personals zu ergreifen, und die Geltung weiterer Auflagen zu prüfen.

Produits pétroliers - Liquides opaques et transparents - Détermination de la viscosité cinématique et calcul de la viscosité dynamique (ISO 3104:2020)

Le présent document spécifie un Mode opératoire A utilisant des viscosimètres manuels en verre et un Mode opératoire B utilisant des viscosimètres à capillaires en verre dans un assemblage automatisé, pour la détermination de la viscosité cinématique, ν, de produits pétroliers liquides transparents et opaques, pour un volume de liquide s'écoulant sous la gravité à travers un viscosimètre à capillaires en verre étalonné. La viscosité dynamique, η, est obtenue en multipliant la viscosité cinématique mesurée par la masse volumique, ρ, du liquide. La plage de viscosités cinématiques couverte dans la présente méthode d'essai est comprise entre 0,2 mm2/s et 300 000 mm2/s sur la plage de températures de ?20 °C à +150 °C.
NOTE       Le résultat obtenu avec le présent document dépend du comportement de l'échantillon et est destiné à une application sur des liquides dont les contraintes de cisaillement et les vitesses de cisaillement sont essentiellement proportionnelles (comportement d'écoulement newtonien). Si, cependant, la viscosité varie considérablement avec la vitesse de cisaillement, des résultats différents peuvent être obtenus à partir de viscosimètres ayant des diamètres de capillaire différents. Ont été inclus le mode opératoire et les valeurs de fidélité pour des combustibles résiduels qui, dans certaines conditions, présentent un comportement non newtonien.

Naftni proizvodi - Prozorne in neprozorne tekočine - Določevanje kinematične viskoznosti in izračun dinamične viskoznosti (ISO 3104:2020)

General Information

Status
Withdrawn
Public Enquiry End Date
31-Jan-2018
Publication Date
05-Nov-2020
Withdrawal Date
03-Dec-2023
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Dec-2023
Due Date
27-Dec-2023
Completion Date
04-Dec-2023

Relations

Buy Standard

Standard
EN ISO 3104:2020
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 3104:2018
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3104:2020
01-december-2020
Nadomešča:
SIST EN ISO 3104:1998
SIST EN ISO 3104:1998/AC:1999
Naftni proizvodi - Prozorne in neprozorne tekočine - Določevanje kinematične
viskoznosti in izračun dinamične viskoznosti (ISO 3104:2020)
Petroleum products - Transparent and opaque liquids - Determination of kinematic
viscosity and calculation of dynamic viscosity (ISO 3104:2020)
Mineralölerzeugnisse - Durchsichtige und undurchsichtige Flüssigkeiten - Bestimmung
der kinematischen Viskosität und Berechnung der dynamischen Viskosität (ISO
3104:2020)
Produits pétroliers - Liquides opaques et transparents - Détermination de la viscosité
cinématique et calcul de la viscosité dynamique (ISO 3104:2020)
Ta slovenski standard je istoveten z: EN ISO 3104:2020
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 3104:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3104:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 3104:2020


EN ISO 3104
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 75.080 Supersedes EN ISO 3104:1996
English Version

Petroleum products - Transparent and opaque liquids -
Determination of kinematic viscosity and calculation of
dynamic viscosity (ISO 3104:2020)
Produits pétroliers - Liquides opaques et transparents Mineralölerzeugnisse - Durchsichtige und
- Détermination de la viscosité cinématique et calcul de undurchsichtige Flüssigkeiten - Bestimmung der
la viscosité dynamique (ISO 3104:2020) kinematischen Viskosität und Berechnung der
dynamischen Viskosität (ISO 3104:2020)
This European Standard was approved by CEN on 16 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3104:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3104:2020
EN ISO 3104:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3104:2020
EN ISO 3104:2020 (E)
European foreword
This document (EN ISO 3104:2020) has been prepared by Technical Committee ISO/TC 28 "Petroleum
and related products, fuels and lubricants from natural or synthetic sources" in collaboration with
Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of
petroleum, synthetic and biological origin.” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3104:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia,
...

SLOVENSKI STANDARD
oSIST prEN ISO 3104:2018
01-januar-2018
1DIWQLSURL]YRGL3UR]RUQHLQQHSUR]RUQHWHNRþLQH'RORþHYDQMHNLQHPDWLþQH
YLVNR]QRVWLLQL]UDþXQGLQDPLþQHYLVNR]QRVWL ,62',6
Petroleum products - Transparent and opaque liquids - Determination of kinematic
viscosity and calculation of dynamic viscosity (ISO/DIS 3104:2017)
Mineralölerzeugnisse - Durchsichtige und undurchsichtige Flüssigkeiten - Bestimmung
der kinematischen Viskosität und Berechnung der dynamischen Viskosität (ISO/DIS
3104:2017)
Produits pétroliers - Liquides opaques et transparents - Détermination de la viscosité
cinématique et calcul de la viscosité dynamique (ISO/DIS 3104:2017)
Ta slovenski standard je istoveten z: prEN ISO 3104
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
oSIST prEN ISO 3104:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3104:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 3104:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3104
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
2017-10-23 2018-01-15
Petroleum products — Transparent and opaque liquids —
Determination of kinematic viscosity and calculation of
dynamic viscosity
Produits pétroliers — Liquides opaques et transparents — Détermination de la viscosité cinématique et
calcul de la viscosité dynamique
ICS: 75.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3104:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 3104:2018
ISO/DIS 3104:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 3104:2018
ISO/DIS 3104:2017 (E)
Contents Page
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Principle .7
5 Reagents and materials .7
6 Apparatus design and requirements .7
7 Verification . 11
8 Re-calibration . 12
9 Quality control . 12
10 Sample preparation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.