SIST EN ISO 26443:2016
(Main)Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
This International Standard specifies a method for the qualitative evaluation of the adhesion of ceramic coatings up to 20 µm thick by indentation with a Rockwell diamond indenter. The formation of cracks after indentation may also reveal cohesive failure. The indentations are made with a Rockwell hardness test instrument.
The method described in this International Standard may also be suitable for evaluating the adhesion of metallic coatings.
The test is not suitable for elastic coatings on hard substrates.
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von keramischen Schichten (ISO 26443:2008)
Diese Internationale Norm legt ein Verfahren zur qualitativen Bewertung der Haftung keramischer SchichtenN1) mit einer Dicke von bis zu 20 µm fest, bei dem mit einem für die Rockwell-Härteprüfung verwendeten Diamant-Eindringkörper ein EindruckN1) erzeugt wird. Die Bildung von Rissen am Eindruck kann auch ein Kohäsionsversagen erkennen lassen. Die Eindrücke werden mit einem Rockwell-Härte¬prüf-gerät erzeugt.
Das in dieser Internationalen Norm beschriebene Verfahren kann auch zur Bewertung der Haftung metal-lischer Schichten geeignet sein.
Diese Prüfung ist für elastische SchichtenN1) auf harten Grundwerkstoffen nicht geeignet.
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration de Rockwell (ISO 26443:2008)
L'ISO 26443:2008 spécifie une méthode permettant l'évaluation qualitative de l'adhérence de revêtements céramiques jusqu'à 20 µm d'épaisseur par indentation à l'aide d'un pénétrateur diamanté de Rockwell. La formation de fissures après l'indentation peut également révéler une rupture cohésive. Les indentations sont réalisées à l'aide d'un instrument d'essai de dureté Rockwell.
La méthode décrite dans la présente Norme internationale peut également être adaptée à l'évaluation de l'adhérence de revêtements métalliques.
L'essai n'est pas adapté aux revêtements élastiques sur des substrats durs.
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Preskus z vtiskanjem po Rockwellu za ovrednotenje sprijemnosti keramičnih prevlek (ISO 26443:2008)
Ta mednarodni standard opredeljuje metodo za ocenjevanje kakovosti adhezije keramičnih prevlek debeline do 20 µm z vtiskanjem z Rockwellovo diamantno preskusno konico. Nastanek razpok po vtiskanju lahko razkriva tudi kohezivno napako. Vtiskanje se izvede z Rockwellovim instrumentom za preskušanje trdote. Metoda, opisana v tem mednarodnem standardu, je lahko primerna tudi za ocenjevanje adhezije kovinskih prevlek. Preskus ni primeren za elastične prevleke na trdih substratih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 26443:2016
01-junij-2016
1DGRPHãþD
SIST-TS CEN/TS 1071-8:2005
)LQDNHUDPLND VRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND 3UHVNXV]
YWLVNDQMHPSR5RFNZHOOX]DRYUHGQRWHQMHVSULMHPQRVWLNHUDPLþQLKSUHYOHN ,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation
test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von
keramischen Schichten (ISO 26443:2008)
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par
l'essai de pénétration de Rockwell (ISO 26443:2008)
Ta slovenski standard je istoveten z: EN ISO 26443:2016
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 26443:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 26443:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 26443:2016
EN ISO 26443
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes CEN/TS 1071-8:2004
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Rockwell indentation test for evaluation of
adhesion of ceramic coatings (ISO 26443:2008)
Céramiques techniques - Évaluation de l'adhérence des Hochleistungskeramik - Rockwell-Eindringprüfung zur
revêtements céramiques par l'essai de pénétration Bewertung der Haftung von keramischen Schichten
Rockwell (ISO 26443:2008) (ISO 26443:2008)
This European Standard was approved by CEN on 18 March 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 26443:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 26443:2016
EN ISO 26443:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 26443:2016
EN ISO 26443:2016 (E)
European foreword
The text of ISO 26443:2008 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 26443:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN/TS 1071-8:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 26443:2008 has been a
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von keramischen Schichten (ISO 26443:2008)Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration de Rockwell (ISO 26443:2008)Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:FprEN ISO 26443 revkSIST FprEN ISO 26443:2015en01-november-2015kSIST FprEN ISO 26443:2015SLOVENSKI
STANDARD
kSIST FprEN ISO 26443:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 26443 rev
September 2015 ICS 81.060.30 Will supersede CEN/TS 1071-8:2004English Version
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration de Rockwell (ISO 26443:2008)
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von keramischen Schichten (ISO 26443:2008) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 184.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 26443 rev:2015 EkSIST FprEN ISO 26443:2015
FprEN ISO 26443:2015 (E) 2 Contents Page European foreword .3
kSIST FprEN ISO 26443:2015
FprEN ISO 26443:2015 (E) 3 European foreword The text of ISO 26443:2008 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 26443:2015 by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede CEN/TS 1071-8:2004. Endorsement notice The text of ISO 26443:2008 has been approved by CEN as FprEN ISO 26443:2015 without any modification. kSIST FprEN ISO 26443:2015
kSIST FprEN ISO 26443:2015
Reference numberISO 26443:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO26443First edition2008-06-15Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings Céramiques techniques — Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration de Rockwell
kSIST FprEN ISO 26443:2015
ISO 26443:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.