SIST EN 16622:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kalcijska mikrosilika za beton - Definicije, zahteve in merila skladnostiSiliko-Calciumstaub für Beton - Definitionen, Anforderungen und KonformitätskriterienFumées hydrauliques de silico-calcium pour béton - Définitions, exigences et critères de conformitéSilica-calcium fume for concrete - Definitions, requirements and conformity criteria91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 16622:2015SIST EN 16622:2016en,fr,de01-maj-2016SIST EN 16622:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16622
November
t r s w ICS
{ sä s r rä u r English Version
Silicaæcalcium fume for concrete æ Definitionsá requirements and conformity criteria Fumées de silicoæcalcium pour béton æ Définitionsá exigences et critères de conformité
SilikoæCalciumstaub für Beton æ Definitionená Anforderungen und Konformitätskriterien This European Standard was approved by CEN on
t x September
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x x t tã t r s w ESIST EN 16622:2016

Clauses of this European Standard addressing the provisions
of the EU Construction Products Regulation . 22 ZA.1 Scope and relevant characteristics . 22 ZA.2 Procedure for AVCP of SCF . 23 ZA.2.1 System of AVCP . 23 ZA.2.2 Declaration of performance (DoP) . 24 ZA.2.2.1 General . 24 ZA.2.2.2 Content . 25 ZA.2.2.3 Example of DoP . 26 ZA.3 CE marking and labelling . 28 Bibliography . 31
of samples Compliance criteria Silicon dioxide 5.2.1 5.2.1 1 5.2.1 Elemental silicon 5.2.2 5.2.2 1 5.2.2 Total calcium oxide 5.2.3 5.2.3 1 5.2.3 Free calcium oxide 5.2.4 5.2.4 1 5.2.4 Sulfate 5.2.5 5.2.5 1 5.2.5 Total alkalis 5.2.6 5.2.6 1 5.2.6 Chloride 5.2.7 5.2.7 1 5.2.7 Loss on ignition 5.2.8 5.2.8 1 5.2.8 Specific surface 5.3.1 5.3.1 1 5.3.1 Activity index 5.3.2 5.3.2 1 5.3.2 Particle density 5.3.3 5.3.3 1 5.3.3 a According to 5.1, other test methods than those indicated may be used provided their correlation with the reference method is known. b The methods used to take and prepare samples shall be in accordance with EN 196–7. 1 000 g dried SCF is an appropriate sample size. The sample shall be taken at the point(s) of release. 6.2.3 Test reports The results of the determination of the product type shall be documented in test reports. All test reports shall be retained by the manufacturer for at least 10 years after the last date of production of the SCF to which they relate. 6.3 Factory production control (FPC) 6.3.1 General The manufacturer shall establish, document and maintain an FPC system to ensure that the products placed on the market comply with the declared performance of the essential characteristics. The FPC system shall consist of procedures, regular inspections and tests and/or assessments and the use of the results to control raw and other incoming materials or components, equipment, the production process and the product. All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic manner in the form of written policies and procedures. This factory production control system documentation shall ensure a common understanding of the evaluation of the constancy of performance and enable the achievement of the required product performances and the effective operation of the production control system to be checked. Factory production control therefore brings together operational techniques and all measures allowing maintenance and control of the compliance of the product with the declared performances of the essential characteristics. SIST EN 16622:2016
...