SIST EN IEC 61960-4:2020

SLOVENSKI STANDARD
01-oktober-2020
Sekundarni členi in baterije, ki vsebujejo alkalne ali druge nekislinske elektrolite -
Sekundarni litijevi členi in baterije za prenosne naprave - 4. del: Gumbni litijevi
sekundarni členi in baterije
Secondary cells and batteries containing alkaline or other non-acid electrolytes -
Secondary lithium cells and batteries for portable applications - Part 4: Coin types
(button) lithium secondary cells and batteries
Ta slovenski standard je istoveten z: EN IEC 61960-4:2020
ICS:
29.220.30 Alkalni sekundarni členi in Alkaline secondary cells and
baterije batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61960-4

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 29.220.99
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Secondary lithium cells and batteries for
portable applications - Part 4: Coin secondary lithium cells, and
batteries made from them
(IEC 61960-4:2020)
Accumulateurs alcalins et autres accumulateurs à Sekundärzellen und -batterien mit alkalischen oder anderen
électrolyte non acide - Accumulateurs au lithium pour nichtsäurehaltigen Elektrolyten - Sekundäre Lithiumzellen
applications portables - Partie 4: Éléments et batteries und -batterien für tragbare Anwendungen - Teil 4:
d'accumulateurs boutons au lithium Sekundäre Lithiumknopfzellen und daraus hergestellte
(IEC 61960-4:2020) Batterien
(IEC 61960-4:2020)
This European Standard was approved by CENELEC on 2020-05-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61960-4:2020 E

European foreword
The text of document 21A/725/FDIS, future edition 1 of IEC 61960-4, prepared by SC 21A "Secondary
cells and batteries containing alkaline or other non-acid electrolytes" of IEC/TC 21 "Secondary cells
and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-25
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61960-4:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60051 (series) NOTE Harmonized as EN 60051 (series)
IEC 60086-1 NOTE Harmonized as EN 60086-1
IEC 60086-2 NOTE Harmonized as EN 60086-2
IEC 60086-3 NOTE Harmonized as EN 60086-3
IEC 60086-4:2019 NOTE Harmonized as EN IEC 60086-4:2019 (not modified)
IEC 61434 NOTE Harmonized as EN 61434
IEC 61959 NOTE Harmonized as EN 61959
IEC 61960-3 NOTE Harmonized as EN 61960-3
IEC 62133 (series) NOTE Harmonized as EN 62133 (series)
IEC 62281 NOTE Harmonized as EN IEC 62281
IEC 62368-1 NOTE Harmonized as EN IEC 62368-1

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-482 2004 International Electrotechnical Vocabulary - - -
Part 482: Primary and secondary cells and
batteries
IEC 62133-2 2017 Secondary cells and batteries containing EN 62133-2 2017
alkaline or other non-acid electrolytes - Safety
requirements for portable sealed secondary
lithium cells, and for batteries made from
them, for use in portable applications - Part 2:
Lithium systems
IEC 61960-4 ®
Edition 1.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Secondary cells and batteries containing alkaline or other non-acid electrolytes –

Secondary lithium cells and batteries for portable applications –

Part 4: Coin secondary lithium cells, and batteries made from them

Accumulateurs alcalins et autres accumulateurs à électrolyte non acide –

Accumulateurs au lithium pour applications portables –

Partie 4: Éléments et batteries d'accumulateurs boutons au lithium

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.99 ISBN 978-2-8322-8069-0

– 2 – IEC 61960-4:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Parameter measurement tolerances . 7
5 Cell designation and marking . 7
5.1 Cell designation . 7
5.2 Marking . 9
5.2.1 General . 9
5.2.2 Small cells or batteries . 9
6 Electrical tests . 9
6.1 General . 9
6.2 Charging procedure for test purposes . 10
6.3 Discharge performance . 11
6.4 Charge (capacity) recovery after long-term storage . 12
6.5 Endurance in cycles . 12
6.6 Cell or battery internal resistance (AC resistance) . 13
6.6.1 General . 13
6.6.2 Test – General . 13
6.6.3 Measurement . 13
6.6.4 Acceptance criterion . 14
7 Differentiation . 14
Annex A (informative) Guidelines for designers of equipment using lithium batteries . 15
Bibliography . 16

Figure 1 – Dimensional characteristics . 8
Figure 2 – Sample sizes and sequence of tests . 10

Table 1 – Electrochemical systems in current practical use . 8
Table 2 – Examples of recommended upper limit charge voltage . 11
Table 3 – Recommended end-of-discharge voltage limit . 11
Table 4 – Minimum number of cycles . 13
Table A.1 – Equipment design guidelines . 15

IEC 61960-4:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR
OTHER NON-ACID ELECTROLYTES – SECONDARY LITHIUM CELLS
AND BATTERIES FOR PORTABLE APPLICATIONS –

Part 4: Coin secondary lithium cells, and batteries made from them

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that
...