iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 707:1999

(Main)

Agricultural machinery - Slurry tankers - Safety

Agricultural machinery - Slurry tankers - Safety

This standard specifies specific safety requirements and their verification for the design construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power.  NOTE: Braking requirements are not included in this standard. These will be supplied during its revision depending on the development of European regulations.  In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been considered in this standard.  This standard applies primarly to machines which are manufactured after the date of issue of the standard.

Landmaschinen - Flüssigmisttankwagen - Sicherheit

Diese Norm enthält spezifische sicherheitstechnische Anforderungen und deren Überprüfung für die Gestaltung und Konstruktion von aufgesattelten, gezogenen und selbstfahrenden Kompressor- oder Pumptankwagen einschließlich ihrer Verteil- oder Einarbeitungseinrichtungen zum Verteilen oder Einarbeiten von Flüssigmist. ANMERKUNG: Anforderungen an Bremsen sind nicht in dieser Norm enthalten. Sie werden bei einer Revision in Abhängigkeit von der Erarbeitung Europäischer Vorschriften behandelt.

Matériel agricole - Epandeurs de lisier - Sécurité

La présente norme détermine les prescriptions spécifiques de sécurité et les vérifications pour la conception et la construction de tous les types d'épandeurs de lisier semi-portés, traînés et automoteurs, y compris les dispositifs d'épandage et d'enfouissage, destinés a l'épandage ou a l'enfouissage de lisier, l'énergie nécessaire a l'opération pouvant etre d'origine pneumatique ou mécanique. NOTE: Les prescriptions en matiere de freinage ne sont pas incluses dans la présente norme. Celles-ci seront étudiées lors de la révision de la norme en fonction du développement des législations européennes.

Kmetijski stroji - Cisterne za gnojevko - Varnost

General Information

Status
Withdrawn
Publication Date
30-Nov-1999
Withdrawal Date
19-Jan-2010
ICS
65.060.25 - Equipment for storage, preparation and distribution of fertilizers
Technical Committee
IMKG - Machinery for agriculture and forestry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Dec-2009
Due Date
22-Jan-2010
Completion Date
20-Jan-2010
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
EN 707:1999 - Agricultural machinery - Slurry tankers - Safety

Relations

Consolidated By
SIST EN 707:1999+A1:2010 - Agricultural machinery - Slurry tankers - Safety
Effective Date
18-Jan-2023
Consolidated By
SIST EN 707:1999+A1:2010 - Agricultural machinery - Slurry tankers - Safety
Effective Date
19-Jan-2023
Consolidated By
SIST EN 707:1999+A1:2010 - Agricultural machinery - Slurry tankers - Safety
Effective Date
01-Feb-2010

Buy Standard

EN 707:1999EN 707:1999
PreviousNext
Standard
EN 707:1999
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 707:1999
01-december-1999
Kmetijski stroji - Cisterne za gnojevko - Varnost
Agricultural machinery - Slurry tankers - Safety
Landmaschinen - Flüssigmisttankwagen - Sicherheit
Matériel agricole - Epandeurs de lisier - Sécurité
Ta slovenski standard je istoveten z: EN 707:1999
ICS:
65.060
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 707:2019(Main)
Agricultural machinery - Slurry tankers - Safety
EN 707:2018

This standard specifies specific safety requirements and their verification for the design and construction of all semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4254-8:2018(Main)
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
EN ISO 4254-8:2018

This part of ISO 4254, applied together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer
application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 690:2014(Main)
Agricultural machinery - Manure spreaders - Safety
EN 690:2013

This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document. This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from: - vibrations of self-propelled machinery; - travelling function of self-propelled machinery; - overturning in regard to the protection of the operator at the driving station of a self-propelled machine; - hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13739-2:2011/AC:2013(Corrigendum)
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods
EN 13739-2:2011/AC:2012

This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
combined grain and fertilizer drills; or
equipment for distributing granulated pesticides; or
solid fertilizer line-distributors (which are dealt with in prEN 13740-1 and in prEN 13740-2).
If the term 'machine' is used it shall cover both full width distributors and broadcasters, except in the definitions.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16119-1:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)
EN ISO 16119-1:2013

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6). NOTE Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects. This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16119-3:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
EN ISO 16119-3:2013

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is not applicable to human-mounted sprayers for bushes or trees. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16119-2:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)
EN ISO 16119-2:2013

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13739-2:2011(Main)
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods
EN 13739-2:2011

This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
combined grain and fertilizer drills; or
equipment for distributing granulated pesticides; or
solid fertilizer line-distributors (which are dealt with in prEN 13740-1 and in prEN 13740-2).
If the term 'machine' is used it shall cover both full width distributors and broadcasters, except in the definitions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13739-1:2011(Main)
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
EN 13739-1:2011

This European Standard specifies requirements for the environmental protection for design and construction of
mounted, trailed and self-propelled full width solid fertilizer distributors and solid fertilizer broadcasters used in
agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook.
The standard does not apply to machines which are:
a) combined grain and fertilizer drills; or
b) equipment for distributing granulated pesticides; or
c) solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
Personal safety aspects have not been considered in this standard; they are dealt with in EN 14017+A1:2008.
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the definitions.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13406:2004(Main)
Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision
EN 13406:2002

This European Standard specifies requirements for the environmental preservation and their verification for design and construction of slurry tankers for broadcasting and band spreading of slurry in agriculture and horticulture. It specifies requirements for the transverse and longitudinal spreading characteristics such as acceptable working widths, steady flow and the stretch within the tolerance zone. These requirements are limited to tests with slurry as described in Annex A, table A.1.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day