SIST EN 13630-3:2025

SLOVENSKI STANDARD
01-december-2025
Eksplozivi za civilno uporabo - Detonacijske in počasi goreče vžigalne vrvice - 3.
del: Ugotavljanje občutljivosti jedra detonacijskih vrvic na trenje
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of
sensitiveness to friction of the core of detonating cords
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 3:
Bestimmung der Reibempfindlichkeit der Seele von Sprengschnüren
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 3:
Détermination de la sensibilité au frottement de l'âme des cordeaux détonants
Ta slovenski standard je istoveten z: EN 13630-3:2025
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13630-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2025
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes EN 13630-3:2002
English Version
Explosives for civil uses - Detonating cords and safety
fuses - Part 3: Verification of insensitiveness to friction of
the core of detonating cords
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partie 3 : Vérification de l'insensibilité au Sicherheitsanzündschnüre - Teil 3: Überprüfung der
frottement de l'âme des cordeaux détonants Reibunempfindlichkeit der Seele von Sprengschnüren
This European Standard was approved by CEN on 15 September 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13630-3:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
5.1 Thermometer capable of measuring the ambient temperature at ± 0,1 °C. . 5
5.2 Hygrometer capable of measuring the ambient relative humidity at ± 1 %. . 5
6 Preparation of test sample . 5
7 Procedure . 5
8 Expression of results . 6
9 Test report . 6
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/28/EU relating to the making available on the market
and supervision of explosives for civil uses aimed to be covered. 7
Bibliography . 8

European foreword
This document (EN 13630-3:2025) has been prepared by Technical Committee CEN/TC 321 “Explosives
for civil uses”, the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2026 and conflicting national standards shall be
withdrawn at the latest by April 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13630-3:2002.
a) the document title has been changed from “Part 3: Determination of sensitiveness to friction of the
core of detonating cords” to “Part 3: Verification of insensitiveness to friction of the core of
detonating cords”;
b) the Scope has been revised to clarify the explosives covered and not covered in the document;
c) the normative references have been updated;
d) the terminology entries 3.1 and 3.2 have been removed;
e) Clause 4 “Principle” has been added;
f) Clause “Apparatus” has been updated;
g) Clause “Preparation of test sample” and has been revised;
h) Clause “Procedure” has been revised so that no longer a determi
...