iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 442 S1:2003

(Main)

Radiation protection equipment for the measuring and monitoring of airborne tritium

Radiation protection equipment for the measuring and monitoring of airborne tritium

Lays down mandatory requirements and gives examples of acceptable methods for measuring and monitoring equipment to enable the determination of the average value of the concentration of atmospheric tritium in working areas and its variation as a function of time, and to actuate an alarm system if necessary.

Strahlenschutsinstrumentierung zur Messung und Überwachung von Tritium in der Luft

Equipments mesureurs et moniteurs de tritium atmosphérique utilisés pour la radioprotection

Impose des prescriptions impératives et donne des exemples de méthodes acceptables pour les équipements de mesure et de surveillance qui doivent permettre de déterminer la valeur moyenne de la concentration de tritium atmosphérique dans une zone de travail et sa variation en fonction du temps, et de déclencher si nécessaire un signal d'alarme.

Radiation protection equipment for the measuring and monitoring of airborne tritium

General Information

Status
Withdrawn
Publication Date
31-Mar-2003
Withdrawal Date
22-Jul-2018
ICS
17.240 - Radiation measurements
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Jul-2018
Due Date
15-Aug-2018
Completion Date
23-Jul-2018
Ref Project
HD 442 S1:1983 - Radiation protection equipment for the measuring and monitoring of airborne tritium

Buy Standard

HD 442 S1:2003HD 442 S1:2003
PreviousNext
Standardization document
HD 442 S1:2003
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST HD 442 S1:2003

STANDARD
april 2003
Radiation protection equipment for the measuring and monitoring of airborne tritium
ICS 17.240 Referenčna številka
SIST HD 442 S1:2003(en)
©  S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61582:2006(Main)
Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
EN 61582:2006

Specifies the classification, general design requirements, performance characteristics and test procedures for in vivo counting systems for detecting trace amounts of radionuclides in the bodies of persons working in nuclear power plants, laboratories and facilities handling radionuclides, and inhabitants living on territory which may be contaminated. The purpose is to determine the dose equivalent to organs and the effective dose of internal radiation for the whole body.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60761-4:2005(Main)
Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 4: Specific requirements for iodine monitors
EN 60761-4:2004

Lays down specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for iodine monitors.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60761-3:2005(Main)
Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 3: Specific requirements for radioactive noble gas monitors
EN 60761-3:2004

Lays down specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for noble gas effluent monitors.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60761-5:2005(Main)
Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 5: Specific requirements for tritium monitors
EN 60761-5:2004

Establishes specific standard requirements, including technical characteristics and general test conditions and gives examples of acceptable methods for the tritium effluent monitors.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60761-1:2005(Main)
Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 1: General requirements
EN 60761-1:2004

Lays down mandatory general requirements and gives examples of acceptable methods for equipment for continuous monitoring of radioactivity in gaseous effluents. Specifies general characteristics, general test procedures, radiation, electrical, safety and environmental characteristics and the identification and certification of the equipment.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60761-2:2005(Main)
Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 2: Specific requirements for aerosols monitors including transuranic aerosols
EN 60761-2:2004

Establishes specific standard requirements, including technical characteristics and general test conditions, and gives examples of acceptable methods for aerosol effluent monitors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8529-1:2023(Main)
Neutron reference radiations fields - Part 1: Characteristics and methods of production (ISO 8529-1:2021)
EN ISO 8529-1:2023

This document specifies the neutron reference radiation fields, in the energy range from thermal up to 20 MeV, for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy.
This document is concerned only with the methods of producing and characterizing the neutron reference radiation fields.
The neutron reference radiation fields specified are the following:
—   neutron fields from radionuclide sources, including neutron fields from sources in a moderator;
—   neutron fields produced by nuclear reactions with charged particles from accelerators;
—   neutron fields from reactors.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11929-4:2023(Main)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 4: Guidelines to applications (ISO 11929-4:2022)
EN ISO 11929-4:2023

This document specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the “decision threshold”, the “detection limit” and the “limits of the coverage interval” for a non negative ionizing radiation measurand when counting measurements with preselection of time or counts are carried out. The measurand results from a gross count rate and a background count rate as well as from further quantities on the basis of a model of the evaluation. In particular, the measurand can be the net count rate as the difference of the gross count rate and the background count rate, or the net activity of a sample. It can also be influenced by calibration of the measuring system, by sample treatment and by other factors.
ISO 11929-4 gives guidance to the application of ISO 11929 (all parts), summarizing shortly the general procedure and then presenting a wide range of numerical examples. The examples cover elementary applications according to ISO 11929-1 and ISO 11929-2.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21909-1:2023(Main)
Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry (ISO 21909-1:2021)
EN ISO 21909-1:2023

This document provides performance and test requirements for determining the acceptability of
neutron dosimetry systems to be used for the measurement of personal dose equivalent, Hp(10), for
neutrons ranging in energy from thermal to 20 MeV1).
This document applies to all passive neutron detectors that can be used within a personal dosemeter
in part or in all of the above-mentioned neutron energy range. No distinction between the different
techniques available in the marketplace is made in the description of the tests. Only generic distinctions,
for instance, as disposable or reusable dosemeters, are considered.
This document describes type tests only. Type tests are made to assess the basic characteristics of the
dosimetry systems and are often ensured by recognized national laboratories
This document does not present performance tests for characterizing the degradation induced by the
following:
— intrinsic temporal variability of the quality of the dosemeter supplied by the manufacturer;
— intrinsic temporal variability of preparation treatments (before irradiation and/or before reading),
if existing;
— intrinsic temporal variability of reading process;
— degradation due to environmental effects on the preparation treatments, if existing;
— degradation due to environmental effects on the reading process.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21909-2:2023(Main)
Passive neutron dosimetry systems - Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)
EN ISO 21909-2:2023

This document provides methodology and criteria to qualify the dosimetry system at workplaces where
it is used. The criteria in this document apply to dosimetry systems which do not meet the criteria with
regard to energy and direction dependent responses described in ISO 21909-1.
The qualification of the dosimetry system at workplace aims to demonstrate that:
— either, the non-conformity of the dosimetry system to some of the requirements on the energy or
direction dependent responses defined in ISO 21909-1 does not lead to significant discrepancies in
the dose determination for a certain workplace field;
— or, that the correction factor or function used for this specific studied workplace enables the
dosimetry system to accurately determine the conventional dose value with uncertainties similar
to the ones given in ISO 21909-1.
The methodologies to characterize the work place field in order to perform the qualification of the
dosimetry system are given in Annex A. Annex B is complementary as it gives the practical methods to
follow, once one methodology is chosen.
The provider of the dosimetry system shall provide the type test results corresponding to ISO 21909-1.
However, when the dosimetry system to be qualified does not comply with all the criteria of ISO 21909-1
dealing with the energy and angle dependence of the response, some tests of the ISO 21909-1 can be not
performed.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day