SIST EN 6049-004:2019

SLOVENSKI STANDARD
SIST EN 6049-004:2019
01-november-2019
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz metaaramidnih
vlaken - 004. del: Opletena, cevasta, dobro raztegljiva - Standard za proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 004: Braided, tubular, high expandable - Product standard
Luft- und Raumfahrt - Elektrische leitungen, installation - Schutzschlauch aus meta-
aramidfasern - Teil 004: Geflecht, röhrenförmig, hoch dehnbar - Produkt norm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 004 : Tresse, tubulaire, très expansible - Norme de produit
Ta slovenski standard je istoveten z: EN 6049-004:2019
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 6049-004:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 6049-004:2019

---------------------- Page: 2 ----------------------
SIST EN 6049-004:2019


EN 6049-004
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 49.060
English Version

Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 004:
Braided, tubular, high expandable - Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische leitungen,
Gaine de protection en fibres méta-aramides - Partie installation - Schutzschlauch aus meta-aramidfasern -
004 : Tresse, tubulaire, très expansible - Norme de Teil 004: Geflecht, röhrenförmig, hoch dehnbar -
produit Produkt norm
This European Standard was approved by CEN on 18 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-004:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 6049-004:2019
EN 6049-004:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Test methods . 6
6 Designation . 7
7 Marking . 7
2

---------------------- Page: 4 ----------------------
SIST EN 6049-004:2019
EN 6049-004:2019 (E)
European foreword
This document (EN 6049-004:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall be
withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.

3

---------------------- Page: 5 -------
...