SIST EN 300 162-2 V1.2.1:2007
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document applies to shipborne Very High Frequency (VHF) transmitters and receivers capable of voice and Digital Selective Calling (DSC), radio equipment. The present document lays down minimum requirements for VHF radio transmitters and receivers operating in certain frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels, and incorporates the requirements of the relevant recommendations of the International Maritime Organization (IMO). The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
- Status
- Published
- Publication Date
- 28-Feb-2007
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-2007
- Due Date
- 01-Mar-2007
- Completion Date
- 01-Mar-2007
- Mandate
- M/284
SIST EN 300 162-2 V1.2.1:2007 is the Slovenian adoption of ETSI EN 300 162-2 V1.2.1, published by ETSI. It covers shipborne VHF radiotelephone transmitters and receivers for the maritime mobile service, including voice and Digital Selective Calling (DSC), and specifies the essential radio requirements used to show conformity with Article 3.2 of the R&TTE Directive. Manufacturers, test laboratories, and conformity assessors use it to check spectrum use, unwanted emissions, receiver performance, and the test evidence needed for compliance claims.
What does SIST EN 300 162-2 V1.2.1:2007 specify?
SIST EN 300 162-2 V1.2.1:2007 specifies minimum requirements for shipborne Very High Frequency (VHF) transmitters and receivers operating in maritime mobile service bands with 25 kHz and 12.5 kHz channels. It is the Harmonized EN for the Article 3.2 essential requirement on effective spectrum use and avoidance of harmful interference.
The scope also says the document incorporates the relevant recommendations of the International Maritime Organization (IMO). Other ENs may still apply when equipment must meet other essential requirements of the R&TTE Directive.
The document is organized into these main parts:
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements & conformance Test specifications Table (HS-RTT) for presumption of conformity |
| Annex B | EN title in the official languages |
| Annex C | Bibliography |
Clause 1 states the scope, clause 2 lists references, clause 3 gives definitions and abbreviations, clause 4 sets technical requirements, and clause 5 gives the compliance tests and measurement rules.
What are the key requirements of SIST EN 300 162-2 V1.2.1:2007?
SIST EN 300 162-2 V1.2.1:2007 builds its compliance route around defined transmitter and receiver performance items, plus test conditions and measurement uncertainty rules. In practice, the standard asks you to prove that the radio stays on frequency, radiates only allowed energy, and remains usable in the presence of interference.
Environmental profile and test conditions
Clause 4.1 requires tests to be carried out at representative points within the declared operational environmental profile, with at least the test conditions given in the document. It also expects the equipment to be checked under a sufficient variety of environmental conditions to give confidence in compliance. For a user or supplier, this means the declared operating environment must match the way the equipment is actually verified.
Clause 5.1 ties the test conditions, power supply, and ambient temperatures to EN 300 162-1. That matters because the same radio can behave differently under different supply and temperature conditions.
Transmitter requirements
Clauses 4.2.1 to 4.2.7 cover transmitter frequency error, carrier power, frequency deviation, adjacent channel power, conducted spurious emissions conveyed to the antenna, cabinet radiation and other conducted spurious emissions, and transient frequency behaviour. Each item takes its definition and limit from EN 300 162-1 and its test from clause 5.3.
These requirements matter because they control how accurately the transmitter occupies the intended channel and how much unwanted energy it sends into nearby channels or out of the equipment housing. For a buyer or compliance engineer, they are the core checks on spectrum etiquette and interference risk.
Receiver requirements
Clauses 4.2.8 to 4.2.16 cover maximum usable sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response, blocking or desensitization, receiver conducted spurious emissions, receiver radiated spurious emissions, and receiver desensitization during simultaneous transmission and reception for duplex equipment. Clause 5.4 gives the matching test specifications.
These requirements matter because they show whether the receiver can still hear a wanted signal when strong or unwanted signals are present. For practical procurement and testing, they indicate how well the equipment will behave in a crowded maritime radio environment.
Measurement uncertainty and reporting
Clause 5.2 requires the test report to include the measurement uncertainty for each parameter, and the reported uncertainty must be at or below the figures given in Table 1. The uncertainty is to be calculated in accordance with TR 100 028-1, using a coverage factor of k = 1.96 or k = 2.
This is important because conformity decisions are based on measured values plus their uncertainty, not just on the nominal result. In practice, labs need a validated uncertainty budget before their results can support a claim of compliance.
Presumption of conformity
Annex A provides the HS Requirements & conformance Test specifications Table (HS-RTT). It cross-references each requirement with its test clause and marks the transmitter requirements as part of the Essential Radio Test Suite, while the receiver requirements are listed in the Other Test Suite.
For users, Annex A is the quick map from requirement to test evidence. A completed HS-RTT table is the document’s route to a presumption of conformity under Article 3.2.
What terms does SIST EN 300 162-2 V1.2.1:2007 define?
- Environmental profile - The range of environmental conditions under which the equipment must comply with the standard.
- Digital Selective Calling (DSC) - The signalling function covered alongside voice operation in the shipborne VHF equipment.
- Very High Frequency (VHF) - The frequency range used by the radiotelephone transmitters and receivers in scope.
- Electromagnetic compatibility (EMC) - The ability of equipment to operate without creating or suffering unacceptable electromagnetic disturbance.
- Harmonized Standard (HS) - A standard intended to support conformity with the R&TTE Directive.
- Radio and Telecommunications Terminal Equipment (R&TTE) - The directive framework referenced by the standard for essential requirements and conformity.
Who uses SIST EN 300 162-2 V1.2.1:2007?
SIST EN 300 162-2 V1.2.1:2007 is used by manufacturers of shipborne maritime VHF radios, especially equipment with voice and DSC functions. It is also used by test laboratories that measure transmitter and receiver performance, and by conformity assessment teams that prepare technical files and compliance statements.
Quality managers, regulatory specialists, and buyers use it to understand what evidence is needed before a radio is placed on the market or accepted into a product range. Maritime communication equipment suppliers use it when they need a clear test and documentation path for Article 3.2 compliance.
What changed in SIST EN 300 162-2 V1.2.1:2007 from the previous edition?
The document history shows that V1.2.1 follows V1.1.2. It also records a one-step approval procedure for the 2006 version before the final publication of V1.2.1.
Which standards are used with SIST EN 300 162-2 V1.2.1:2007?
Clause 2 names the references that the standard relies on:
| Reference | What it contributes |
|---|---|
| Directive 1999/5/EC (R&TTE Directive) | Legal basis for the essential requirement covered by the standard |
| ETSI EN 300 162-1 V1.4.1 | Definitions, limits, and detailed measurement methods for the transmitter and receiver characteristics |
| ETSI TR 100 028-1 V1.4.1 | Method for calculating measurement uncertainty |
| Directive 98/34/EC | Procedural basis mentioned in the foreword for the standards mandate |
| Commission Decision 2004/71/EC | Environmental conditions relevant to the testing context |
What does the SIST EN 300 162-2 V1.2.1:2007 document contain?
SIST EN 300 162-2 V1.2.1:2007 contains the technical requirement list, the matching compliance tests, and the measurement rules used to judge results. Clause 4 gives the transmitter and receiver performance items, while clause 5 gives the test conditions, interpretation of results, and the essential and other test suites.
The document also contains Table 1 for maximum measurement uncertainties and Annex A’s HS-RTT proforma for conformity claims. Annex B provides the title in multiple official languages, and Annex C lists bibliography items for additional context.
Relations
- Official Journal Project Relation
SIST EN 300 162-2:2001 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive - Effective Date
- 17-Nov-2009
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
FSC International
Forest Stewardship Council certification.
Sponsored listings
Frequently Asked Questions
SIST EN 300 162-2 V1.2.1:2007 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document applies to shipborne Very High Frequency (VHF) transmitters and receivers capable of voice and Digital Selective Calling (DSC), radio equipment. The present document lays down minimum requirements for VHF radio transmitters and receivers operating in certain frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels, and incorporates the requirements of the relevant recommendations of the International Maritime Organization (IMO). The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
The present document applies to shipborne Very High Frequency (VHF) transmitters and receivers capable of voice and Digital Selective Calling (DSC), radio equipment. The present document lays down minimum requirements for VHF radio transmitters and receivers operating in certain frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels, and incorporates the requirements of the relevant recommendations of the International Maritime Organization (IMO). The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
SIST EN 300 162-2 V1.2.1:2007 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general; 47.020.70 - Navigation and control equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 162-2 V1.2.1:2007 has the following relationships with other standards: It is inter standard links to SIST EN 300 162-2:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 300 162-2 V1.2.1:2007 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 162-2 V1.2.1:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
5DGLRWHOHIRQVNLRGGDMQLNLLQVSUHMHPQLNL]DSRPRUVNHPRELOQHVWRULWYHNLGHOXMHMR
YSDVRYLK9+)GHO +DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQD
GLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone
transmitters and receivers for the maritime mobile service operating in VHF bands; Part
2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 162-2 Version 1.2.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Radiotelephone transmitters and receivers for
the maritime mobile service operating in VHF bands;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 300 162-2 V1.2.1 (2006-12)
Reference
REN/ERM-TG26-073-2
Keywords
EMC, GMDSS, maritime, radio, regulation,
telephony, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2006.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 300 162-2 V1.2.1 (2006-12)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Technical requirements specifications.7
4.1 Environmental profile.7
4.2 Conformance requirements.7
4.2.1 Frequency error.7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Conformance.7
4.2.2 Carrier power.8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Conformance.8
4.2.3 Frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Conformance.8
4.2.4 Adjacent channel power.8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Conformance.8
4.2.5 Conducted spurious emissions conveyed to the antenna .8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Conformance.8
4.2.6 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna.9
4.2.6.1 Definition.9
4.2.6.2 Limit.9
4.2.6.3 Conformance.9
4.2.7 Transient frequency behaviour of the transmitter .9
4.2.7.1 Definition.9
4.2.7.2 Limit.9
4.2.7.3 Conformance.9
4.2.8 Maximum usable sensitivity.9
4.2.8.1 Definition.9
4.2.8.2 Limit.9
4.2.8.3 Conformance.9
4.2.9 Co-channel rejection.9
4.2.9.1 Definition.9
4.2.9.2 Limit.9
4.2.9.3 Conformance.10
4.2.10 Adjacent channel selectivity .10
4.2.10.1 Definition.10
4.2.10.2 Limit.10
4.2.10.3 Conformance.10
4.2.11 Spurious response rejection .10
4.2.11.1 Definition.10
4.2.11.2 Limit.10
4.2.11.3 Conformance.10
ETSI
4 ETSI EN 300 162-2 V1.2.1 (2006-12)
4.2.12 Intermodulation response.10
4.2.12.1 Definition.10
4.2.12.2 Limit.10
4.2.12.3 Conformance.10
4.2.13 Blocking or desensitization.10
4.2.13.1 Definition.10
4.2.13.2 Limit.10
4.2.13.3 Conformance.11
4.2.14 Receiver conducted spurious emissions.11
4.2.14.1 Definition.11
4.2.14.2 Limit.11
4.2.14.3 Conformance.11
4.2.15 Receiver radiated spurious emissions .11
4.2.15.1 Definition.11
4.2.15.2 Limit.11
4.2.15.3 Conformance.11
4.2.16 Receiver desensitization with simultaneous transmission and reception (Equipment designed for
duplex operation) .11
4.2.16.1 Definition.11
4.2.16.2 Limit.11
4.2.16.3 Conformance.11
5 Testing for compliance with technical requirements.12
5.1 Test conditions, power supply and ambient temperatures.12
5.2 Interpretation of the measurement results .12
5.3 Essential radio test suites.13
5.3.1 Frequency error.13
5.3.2 Carrier power.13
5.3.3 Frequency deviation.13
5.3.4 Adjacent channel power.13
5.3.5 Conducted spurious emissions conveyed to the antenna .13
5.3.6 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna.13
5.3.7 Transient frequency behaviour of the transmitter .13
5.4 Other test specifications.13
5.4.1 General.13
5.4.2 Maximum usable sensitivity.13
5.4.3 Co-channel rejection.13
5.4.4 Adjacent channel selectivity .14
5.4.5 Spurious response rejection .14
5.4.6 Intermodulation response.14
5.4.7 Blocking or desensitization.14
5.4.8 Receiver conducted spurious emissions.14
5.4.9 Receiver radiated spurious emissions .14
5.4.10 Receiver desensitization with simultaneous transmission and reception (Duplex operation).14
Annex A (normative): HS Requirements & conformance Test specifications Table (HS-
RTT).15
Annex B (informative): The EN title in the official languages .18
Annex C (informative): Bibliography.20
History .21
ETSI
5 ETSI EN 300 162-2 V1.2.1 (2006-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) [4] laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the radiotelephone transmitters and receivers for the
maritime mobile service operating in VHF bands, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 17 November 2006
Date of latest announcement of this EN (doa): 28 February 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2007
Date of withdrawal of any conflicting National Standard (dow): 31 August 2008
ETSI
6 ETSI EN 300 162-2 V1.2.1 (2006-12)
1 Scope
The present document applies to shipborne Very High Frequency (VHF) transmitters and receivers capable of voice and
Digital Selective Calling (DSC), radio equipment.
The present document lays down minimum requirements for VHF radio transmitters and receivers operating in certain
frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels, and incorporates
the requirements of the relevant recommendations of the International Maritime Organization (IMO).
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2,
which states that "…. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ETSI EN 300 162-1 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF
bands; Part 1: Technical characteristics and methods of measurement".
[3] ETSI TR 100 028-1 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics; Part 1".
[4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[5] Commission Decision of 4 September 2003 on essential requirements relating to marine radio
communication equipment which is intended to be used on non-SOLAS vessels and to participate
in the Global Maritime Distress and Safety System (GMDSS) (2004/71/EC).
ETSI
7 ETSI EN 300 162-2 V1.2.1 (2006-12)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
DSC Digital Selective Calling
EMC Electro-Magnetic Compatibility
HS Harmonized Standard
LV Low Voltage
R&TTE Radio and Telecommunications Terminal Equipment
VHF Very High Frequency
4 Technical requirements specifications
4.1 Environmental profile
Tests defined in the present document shall be carried out at representative points within the boundary limits of the
declared operational environmental profile which, as a minimum, shall be that specified in the test conditions contained
in the present document.
As technical performance varies subject to environmental condition
...