iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12958:2002/A1:2004

(Amendment)

Footwear - Test methods for shanks - Fatigue resistance

Footwear - Test methods for shanks - Fatigue resistance

This European Standard specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of women's shoes and of some men's and children's shoes.
NOTE   Steel shanks below 100 mm in length cannot be reliably tested by this method.

Schuhe - Prüfverfahren für Gelenke - Ermüdungswiderstand

Diese Europäische Norm legt ein Prüfverfahren zur Feststellung des Ermüdungswiderstandes von Stahlge-lenken mit einer Mindestlänge von 100 mm fest , welche der Verstärkung des Gelenkbereiches von Damen-schuhen sowie einigen Herren- und Kinderschuhen dienen.
ANMERKUNG   Stahlgelenke unter 100 mm Länge können mit Hilfe dieses Verfahrens nicht zuverlässig geprüft werden.

Chaussures - Méthodes d'essai pour cambrions - Résistance a la fatigue

La présente Norme européenne spécifie une méthode d'essai permettant d'évaluer la résistance a la fatigue des cambrions en acier d'au moins 100 mm de longueur utilisés pour renforcer la cambrure des chaussures pour femmes et de certaines chaussures pour hommes et pour enfants.
NOTE   La présente méthode d'essai n'est pas fiable pour les cambrions en acier de moins de 100 mm de longueur.

Footwear - Test methods for shanks - Fatigue resistance

General Information

Status
Withdrawn
Publication Date
30-Jun-2004
Withdrawal Date
28-Oct-2018
ICS
61.060 - Footwear
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Oct-2018
Due Date
18-Nov-2018
Completion Date
29-Oct-2018
Ref Project
EN 12958:2000/A1:2004 - Footwear - Test methods for shanks - Fatigue resistance

Relations

Amends
SIST EN 12958:2002 - Footwear - Test methods for shanks - Fatigue resistance
Effective Date
01-Jul-2004
Amends
SIST EN 12958:2002 - Footwear - Test methods for shanks - Fatigue resistance
Effective Date
08-Jun-2022

Buy Standard

EN 12958:2002/A1:2004EN 12958:2002/A1:2004
PreviousNext
Amendment
EN 12958:2002/A1:2004
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12958:2002/A1:2004
01-julij-2004
Footwear - Test methods for shanks - Fatigue resistance
Footwear - Test methods for shanks - Fatigue resistance
Schuhe - Prüfverfahren für Gelenke - Ermüdungswiderstand
Chaussures - Méthodes d'essai pour cambrions - Résistance a la fatigue
Ta slovenski standard je istoveten z: EN 12958:2000/A1:2004
ICS:
61.060 Obuvala Footwear
SIST EN 12958:2002/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19410-1:2023(Main)
Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)
EN ISO 19410-1:2022

This standard specifies a method to measure the effective shoe length to accommodate the foot. This standard is not applicable to heel open shoes.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20535:2022(Main)
Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying (ISO 20535:2019)
EN ISO 20535:2022

This document specifies a method for determining the dimensional change of footwear insoles and insocks after cycle wetting and drying regardless of the material.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19574:2022(Main)
Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test) (ISO 19574:2022)
EN ISO 19574:2022

This International Standard specifies a test method (growth test) for qualitative evaluation of the antifungal activity of footwear and footwear components due to the action of micro-fungi.
This International Standard is applicable only to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16189:2022(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO 16189:2021)
EN ISO 16189:2021

This document specifies a method to determine the amounts of dimethylformamide (DMF) in footwear
and footwear components containing polyurethane (PU) coated material.
NOTE 1 In the footwear industry, when PU is injected (reaction moulded), this process does not require the
use of DMF. For PU coated material, the use of DMF is possible.
NOTE 2 Several abbreviations can be used for dimethylformamide DMF, DMFa, DMFo. This document uses
DMF.
ISO/TR 16178:2021, Table 1 defines which materials are concerned by this determination.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21061:2022(Main)
Footwear - Chemical tests - General principles on the preparation of samples (ISO 21061:2021)
EN ISO 21061:2021

This European Standard specifies preparation of samples for footwear and footwear components to carry out chemical tests.
This International Standard is applicable to all types of footwear and footwear components.
These are general conditions unless otherwise stated in the corresponding test method or product requirements.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16190:2022(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials (ISO 16190:2021)
EN ISO 16190:2021

This document specifies a method to determine the amounts of polycyclic aromatic hydrocarbons
(PAHs) in footwear and footwear components.
NOTE A list of relevant materials can be found in ISO/TR 16178:2021, Table 1[3].

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 16178:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Lists of critical chemical substances (ISO/TR 16178:2021)
CEN ISO/TR 16178:2021

This document defines lists of critical chemical substances potentially present in footwear and footwear
components.
This document describes the critical chemical substances, their potential risks of nocuousness, in which
materials they could be found, and which test method(s) can be used to quantify them.
The test methods listed indicate the state of the art. For some substances, a test method is not available.
This document is applicable to any kind of footwear and footwear components.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19957:2021(Main)
Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2021)
EN ISO 19957:2021

This document specifies a test method for measuring the force required to pull a single heel pin out of a
heel. This test method is used both to measure the heel pin holding strength of heel materials by using
a standard heel pin and a method of insertion, and to assess the heel nailing of commercial production.
This test method is applicable to testing plastics and wooden heels for women’s footwear. Heels
composed of layers of fibreboard or leather and low plastics heels for men’s footwear cannot be tested
by this method.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16181-2:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Part 2: Determination of phthalate without solvent extraction (ISO 16181-2:2021)
EN ISO 16181-2:2021

This document specifies a method for the determination of the content of specific phthalates (see Annex
A) by pyrolyzer/thermal desorption gas chromatography-mass spectrometry (Py/TD-GC-MS). This
document is applicable to all types of footwear materials except textiles.
NOTE See also CEN/TR 16417 for a list of the specific phthalates to which this document applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16186:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Determination of dimethyl fumarat (DMFU) (ISO 16186:2021)
EN ISO 16186:2021

This document specifies a method for the determination of the content of dimethyl fumarate (DMFU)
by gas chromatograph with single quadrupole mass spectrometer (GC-MS) or tandem quadrupole mass
spectrometer (GC-MS/MS).
This document is applicable to all types of footwear and footwear components except metal parts.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day