iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60730-2-13:1999/A1:1999

(Amendment)

Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls

Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls

Corrigendum to EN/A1 issued May 2000

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen -- Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche Regel- und Steuergeräte

Dispositifs de commande électrique automatiques à usage domestique et analogue -- Partie 2-13: Règles particulières pour les dispositifs de commande sensibles à l'humidité

Automatic electrical controls for household and similar use -- Part 2: Particular requirements for humidity sensing controls - Amendment A1 (IEC 60730-2-13:1995/A1:1997)

General Information

Status
Published
Publication Date
30-Jun-1999
ICS
97.120 - Automatic controls for household use
Technical Committee
KNG - Automatic controls for household use
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-1999
Due Date
01-Jul-1999
Completion Date
01-Jul-1999
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60730-2-13:1998/A1:1998 - Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls

Relations

Replaced By
SIST EN 60730-2-13:2008 - Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
Effective Date
29-Jan-2023
Replaced By
SIST EN 60730-2-13:2008 - Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
Effective Date
01-Oct-2010
Amends
SIST EN 60730-2-13:1999 - Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
Effective Date
21-Sep-2010
Amends
SIST EN 60730-2-13:1999 - Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
Effective Date
29-Jan-2023
Amends
SIST EN 60730-2-13:1999 - Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
Effective Date
07-Jun-2022

Buy Standard

EN 60730-2-13:1999/A1:1999EN 60730-2-13:1999/A1:1999
PreviousNext
Amendment
EN 60730-2-13:1999/A1:1999
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60730-2-19:2002/A2:2008
Automatic electrical controls for household and similar use -- Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
EN 60730-2-19:2002/A2:2008

D126/C042: IEC 60730 series permanently excluded from parallel procedures * TC 72 request: 2MV on IEC without CM

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-13:2008(Main)
Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
EN 60730-2-13:2008

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-10:2008(Main)
Automatic electrical controls for household and similar use -- Part 2-10: Particular requirements for motor-starting relays
EN 60730-2-10:2007

This part of IEC 60730 applies to controls for automatically controlling the starting windings of single phase motors associated with equipment for household and similar use. This standard applies to motor-starting relays using NTC or PTC thermistors, additional requirements for which are contained in Annex J. This standard applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of motor-starting relays used in, or in association with, household or similar equipment. Motor-starting relays for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to motor-starting relays designed exclusively for industrial applications.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-4:2008(Main)
Automatic electrical controls for household and similar use -- Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
EN 60730-2-4:2007

This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is an integrated control which is dependent on its correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. Requirements concerning the testing of the combination of motor and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors for motor compressors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. This standard applies to the inherent safety, to the operating values, operating times, and operating sequences, where such are associated with equipment safety, and to the testing of thermal motor protectors used in or on sealed (hermetic and semi-hermetic type) motor-compressors. This standard applies to thermal motor protectors for motor-compressors within the scope of IEC 60335-2-34. Thermal motor protectors for motor compressors not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to thermal motor protectors designed exclusively for industrial applications.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-3:2008(Main)
Automatic electrical controls for household and similar use -- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
EN 60730-2-3:2007

This part of IEC 60730 applies to the evaluation of thermal protectors for ballasts for tubular fluorescent lamps. This standard applies to thermal protectors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. Requirements concerning the testing of the combination of ballasts and thermal protectors are given in IEC 61347-1. This standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of thermal protectors used to protect ballasts for tubular lamps from overheating. This standard applies to thermal protectors for ballasts within the scope of IEC 61347-2-8. Thermal protectors covered by this standard may be suitable for ballasts for other discharge lamps such as ballasts under the scope of IEC 61347-2-9.
This International Standard applies to flexible cables with insulation based on ethylene propylene rubber (EPR), polyvinyl chloride (PVC) or silicone rubber (SiR) for portable earthing and short-circuiting equipment. For this type of cable no rated voltage is given as such cables are exclusively intended for earthing and short-circuiting equipment. The particular types of cable and their code designations are specified in Clause 6 of this standard. The test methods specified in this standard are given in IEC 60227-2, IEC 60245-2, IEC 60811 and IEC 62230.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-1:2001/A16:2007
Automatic electrical controls for household and similar use -- Part 1: General requirements
EN 60730-1:2000/A16:2007

Same dow as in A12, A14 and A15 * To be ratified as EN 60730-1:2000/A16

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-2:2002/A1:2006(Amendment)
Automatic electrical controls for household and similar use -- Part 2-2: Particular requirements for thermal motor protectors
EN 60730-2-2:2002/A1:2006

This standard applies to the partial evaluation of thermal motor protectors as defined in Publication 730-1 for household and similar use including heating, air conditioning and similar applications. This standard applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety and to the testing of thermal motor protectors used in or on household or similar equipment. This standard does not apply to other means of motor protection. This standard does not apply to a manual device for opening the circuit. This standard does not apply to thermal motor protectors for hermetic or semi-hermetic motor compressors. This standard applies to thermal motor protectors for use with electric motors with a rated voltage equal to or less than 660 V and a rated output of 11 kW or less.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-1:2001/A14:2005(Amendment)
Automatic electrical controls for household and similar use -- Part 1: General requirements
EN 60730-1:2000/A14:2005

Superseded by EN 60730-1:2011

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-3:1996/A11:2005(Amendment)
Automatic electrical controls for household and similar use -- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
EN 60730-2-3:1992/A11:2005

Superseded by EN 60730-2-3:2007

  • Amendment
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60730-2-19:2002/A11:2005(Amendment)
Automatic electrical controls for household and similar use -- Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
EN 60730-2-19:2002/A11:2005

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day