iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 467:1996

(Main)

Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body

Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body

This standard specifies the minimum requirements for garments providing protection against liquid chemicals to parts of the body e.g. aprons, sleeves, and hoods. It specifies the performance requirements for the materials of construction of the protective clothing but not for the complete chemical protective clothing, as each individual garment may be worn with other garments.

Schutzkleidung - Schutz gegen flüssige Chemikalien - Leistungsanforderungen an Kleidungsstücke, die für Teile des Körpers einen Schutz gegen Chemikalien gewähren

Diese Norm legt die Mindestanforderungen an Kleidungsstücke fest, die für Teile des Körpers einen Schutz gegen flüssige Chemikalien gewähren, zum Beispiel Schürzen, Armschützer, Hauben. Sie legt die Leistungsanforderungen an die Konstruktionsmaterialien der Schutzkleidung fest, jedoch nicht an die vollständige Chemikalienschutzkleidung, da jedes Einzelkleidungsstück zusammen mit anderen Kleidungsstücken getragen werden kann.

Vetements de protection - Protection contre les produits chimiques liquides - Exigences de performance des articles d'habillement offrant une protection chimique a certaines parties du corps

La présente norme spécifie les exigences minimales demandées aux articles d'habillement offrant une protection contre les produits chimiques liquides a certaines parties du corps, par exemple, les tabliers, les manches et les cagoules. Elle spécifie les exigences de performance pour les matériaux constitutifs du vetement de protection, mais non pas pour le vetement de protection chimique complet, chaque article d'habillement individuel pouvant etre porté avec d'autres articles.

Varovalna obleka - Varovanje pred učinki tekočih kemikalij - Zahteve za izdelavo oblačil, ki zagotavljajo zaščito delov telesa

General Information

Status
Withdrawn
Publication Date
30-Nov-1996
Withdrawal Date
30-Jun-2005
ICS
13.340.10 - Protective clothing
Technical Committee
OVP - Personal protecting equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2005
Due Date
01-Jul-2005
Completion Date
01-Jul-2005
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/BC/CEN/90/2 - Order for standardization concerning Personal Protective Equipment (P.P.E.)
Ref Project
EN 467:1995 - Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body

Relations

Replaced By
SIST EN 14605:2005 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
Effective Date
01-Jul-2005
Amended By
SIST EN 467:1996/A1:1999 - Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body
Effective Date
22-Dec-2008

Buy Standard

EN 467:1996EN 467:1996
PreviousNext
Standard
EN 467:1996
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzkleidung - Schutz gegen flüssige Chemikalien - Leistungsanforderungen an Kleidungsstücke, die für Teile des Körpers einen Schutz gegen Chemikalien gewährenVetements de protection - Protection contre les produits chimiques liquides - Exigences de performance des articles d'habillement offrant une protection chimique a certaines parties du corpsProtective clothing -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 13997:2023(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2023)
EN ISO 13997:2023

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11610:2023(Main)
Protective clothing - Vocabulary (ISO 11610:2023)
EN ISO 11610:2023

This document contains a list of terms which are frequently used in the standardisation of protective clothing and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms.
The definitions are intended to support an unambiguous use of the terms listed.
This document is intended to serve as a reference document for the Working Groups of CEN/TC 162 and ISO/TC 94/SC 13 to ascertain what definitions already exist and may be used for setting up new standards and to provide guidance in the elaboration of new definitions.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    160 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14058:2018+A1:2023(Main + Amendment)
Protective clothing - Garments for protection against cool environments
EN 14058:2017+A1:2023

This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6942:2022(Main)
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2022)
EN ISO 6942:2022

This document specifies two complementary methods (method A and method B) for determining the
behaviour of materials for heat protective clothing subjected to heat radiation.
These tests are carried out on representative single or multi-layer textiles or other materials intended
for clothing for protection against heat. They are also applicable to assemblies, which correspond to the
overall build up of a heat protective clothing assembly with or without underclothing,
Method A serves for visual assessment of any changes in the material after the action of heat radiation.
With method B the protective effect of the materials is determined. The materials may be tested either
by both methods or only by one of them.
The tests according to these two methods serve to classify materials; however, to be able to make a
statement or prediction as to the suitability of a material for protective clothing additional criteria
must be taken into account.
Since the tests are carried out at room temperature the results do not necessarily correspond to the
behaviour of the materials at higher ambient temperatures and therefore are only to a limited extent
suitable for predicting the performance of the protective clothing made from the materials under test.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17673:2022(Main)
Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements
EN 17673:2022

This document applies to garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities.
This document does not concern validating claims that the integrated smart textile and non-textile elements substitute directly any protection provided by the garment from a heat and flame perspective.
The integrated smart textiles and non-textile elements could include not only the parts integrated into the protective garment but also connections to transmit the data generated or exchange data with external devices. It is not within the scope of this document to evaluate either the data storage or transmission (including connectivity) to the external devices, nor the external devices. This document evaluates only the smart textiles and non-textile elements integrated into the garment.
This document supplements the requirements of EN ISO 11612 and EN ISO 13688 and does not replace any of the requirements cited in those documents.
This document sets additional testing and performance requirements linked specifically to the garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities. These additional requirements will depend on the functionality of the smart textile or non-textile element and its needed efficacy during heat and flame hazards and risks from an electrical/electronic safety perspective in these situations.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15384:2020/A1:2021(Amendment)
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing - Amendment 1 (ISO 15384:2018/Amd 1:2021)
EN ISO 15384:2020/A1:2021
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13688:2013/A1:2021(Amendment)
Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd 1:2021)
EN ISO 13688:2013/A1:2021

2021-03-01 - Lack of compliance - publication on hold

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17620:2021(Main)
Guidelines for selection, use, care and maintenance of smart garments protecting against heat and flame
CEN/TR 17620:2021

The purpose of this document is to assist employers (or the person who advises the employer such as suppliers of PPE or services, inspection, insurance companies, etc.) in taking the necessary decisions regarding the selection, use, care and maintenance (SUCAM) of advanced garments and ensembles of garments that provide protection against heat and flame, with integrated smart textiles and smart non-textile elements for enhanced health, safety and survival capabilities that are compliant with the European legislation.
This document supports developers and manufacturers in designing and producing garments with smart textiles and smart non-textile elements that will meet the user’s needs during the whole life cycle of the garment and comply with standard requirements set for protective clothing on use, care and maintenance up to and including the disposal of the protective gear.
This document is not exhaustive in addressing all the safety concerns associated with the use of compliant protective equipment for protection against heat and flames and other related risks.
It is essential not to construe this document as addressing all the safety concerns, if any, associated with the use of this document by testing or repair facilities. It is the responsibility of the persons and organizations that use this document and any other standards or technical report related to PPE:
-   to conduct a risk assessment at the workplace;
-   to select the protective clothing and other PPE, including those with smart (intelligent) features, and to verify that the manufacturer has indicated the selected PPE to be suitable for the identified risks at the workplace;
-   as well as to ensure that these provide a holistic protection, only when the compatibility has been assessed including understanding the workplace and the work environment to determine the properties of protective clothing against heat and flames to establish health and safety practices;
-   to verify that the manufacturer has provided information for risk assessment of the potential risks that may occur due to the smart (intelligent) features in the intended working environment, and that the manufacturer has suggested measurements to compensate such new risks, whilst the employer has to ensure that these measurements are brought to action;
-   and to determine the applicability of regulatory limitations prior to using this document for any designing, manufacturing, and testing.
This document is meant for all end users that are using smart garments for protection against heat and flame. It contains information that can also be useful to other people, such as manufacturers, designers, service providers and educators who may be confronted with smart garments used to protect against heat and flame risks although it will focus on the first four in the list below:
-   petrochemical and chemical industry;
-   welders and foundries;
-   utilities (electrical, gas, water);
-   fire fighters and emergency response;
-   sports (motor sports, boating, etc.);
-   security forces (military, police and private).
It is essential that nothing herein restricts any jurisdiction from exceeding the minimum requirements as provided in the relevant standards.
This document is not intended to cover the aspects related to data security and privacy. For employers using smart garments that monitor and/or collect data, the General Data Protection Regulation (GDPR) and national regulations can apply. It is essential that the smart protective garments are selected, used, taken care and maintained in a way that will neither compromise the safety and privacy of the user nor the security of the enterprise or authority using the smart garment systems.

  • Technical report
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19918:2018/A1:2021(Amendment)
Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials - Amendment 1: Extraction and chemical analysis (ISO 19918:2017/Amd 1:2021)
EN ISO 19918:2017/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 469:2020(Main)
Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities
EN 469:2020

This document specifies minimum performance requirements for protective clothing designed to be worn during firefighting activities. The requirements are detailed in this document covering heat and flame, mechanical, chemical, comfort, visibility, etc.
This document covers the general clothing design, the minimum performance levels of the material used, the methods of test to be used to determine these performance levels, marking and information supplied by the manufacturer.
This document makes distinction between firefighting activities dividing them into two performance levels based on a risk assessment:
-   Level 1: specifies the minimum requirements for firefighting clothing involving work associated with outdoor firefighting and their support activities, taking into account the environments and conditions of the expected operational scenarios of such firefighting activities.
The level 1 is not applicable for protection against risks encountered in fighting fires or rescue from fire activities in structures, unless combined to a level 2 or other specialised PPE.
-   Level 2: specifies the minimum requirements for firefighting clothing for risks encountered in fighting fires and rescue from fire in structures.
The distinction between Level 1 and Level 2 clothing is restricted to the requirements on heat and flame (X1 or X2 - Heat and Flame). These levels of protection can be reached by a single or a combination of separate garments.
Additional marking provides two grades of protection for Y (protection against water penetration) and Z (water vapour resistance). It is essential that these performance grades are indicated on the marking of the clothing and explained in the instructions for use.
This document does not cover protective clothing for specialized tasks or specific risk situations e.g. wildland firefighting, specialized firefighting and/or advanced technical rescue operations dealing with hazardous chemicals, working with chainsaws and water and rope rescue.
This document does not cover protection for the head, hands and feet or specific protection against other hazards e.g. chemical, biological, radiological and electrical hazards. These aspects may be covered in other European Standards.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day