SIST EN 1253-5:2004
(Main)Gullies for buildings - Part 5: Gullies with light liquids closure
Gullies for buildings - Part 5: Gullies with light liquids closure
This standard specifies requirements for the design, construction, performance, application and marking as well as test methods of factory made gullies with a light liquid closure for buildings.
Abläufe für Gebäude - Teil 5: Abläufe mit Leichtflüssigkeitssperren
Diese Europäische Norm legt Anforderungen für Ausführung, Konstruktion, Funktion, Anwendung und Kennzeich-nung sowie Prüfverfahren für werkmäßig hergestellte Abläufe mit Leichtflüssigkeitssperre für Gebäude fest.
Avaloirs et siphons pour bâtiments - Partie 5: Avaloirs et siphons avec arret de liquide a basse densité
La présente Norme européenne spécifie les exigences de conception, de construction, de performances, d'application et de marquage ainsi que les méthodes d'essai pour avaloirs et siphon de bâtiments équipés d'un arret de liquide a basse densité et fabriqués en usine.
Odtoki v stavbah - 5. del: Odtoki z zaporo lahkih tekočin
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abläufe für Gebäude - Teil 5: Abläufe mit LeichtflüssigkeitssperrenAvaloirs et siphons pour bâtiments - Partie 5: Avaloirs et siphons avec arret de liquide a basse densitéGullies for buildings - Part 5: Gullies with light liquids closure91.140.80Drenažni sistemiDrainage systemsICS:Ta slovenski standard je istoveten z:EN 1253-5:2003SIST EN 1253-5:2004en01-maj-2004SIST EN 1253-5:2004SLOVENSKI
STANDARD
SIST EN 1253-5:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1253-5November 2003ICS 91.140.80English versionGullies for buildings - Part 5: Gullies with light liquids closureAvaloirs et siphons pour le bâtiment - Partie 5: Avaloirs etsiphons avec arrêt de liquide à basse densitéAbläufe für Gebäude - Teil 5: Abläufe mitLeichtflüssigkeitssperrenThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1253-5:2003 ESIST EN 1253-5:2004
EN 1253-5 :2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Types.45Materials.56Requirements.56.1General.56.2Inflow.56.3Apertures in gratings.56.4Security height.56.5Tightness.56.6Maintenance.56.7Manufacturer's product information.56.8Flow rates.56.9Marking of floats.57Test methods.67.1General.67.2Closing ability and tightness.67.3Security height.68Place of installation.69Marking.610Quality control.7Bibliography.8SIST EN 1253-5:2004
EN 1253-5 :2003 (E)3ForewordThis document (EN 1253-5:2003) has been prepared by Technical Committee CEN/TC 165 “Waste waterengineering”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.