SIST EN 62841-3-4:2016/A1:2020
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)
Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für transportable Tischschleifmaschinen (IEC 62841-3-4:2016/A1:2019)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables (IEC 62841-3-4:2016/A1:2019)
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-4. del: Posebne zahteve za prenosne namizne brusilnike - Dopolnilo A1 (IEC 62841-3-4:2016/A1:2019)
General Information
- Status
- Published
- Publication Date
- 16-Apr-2020
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 02-Apr-2020
- Due Date
- 07-Jun-2020
- Completion Date
- 17-Apr-2020
Relations
- Effective Date
- 06-Nov-2018
Overview
EN 62841-3-4:2016/A1:2020 is the CENELEC (CLC) amendment to the European safety standard for transportable bench grinders. It modifies EN 62841-3-4:2016 to align with IEC 62841-3-4:2016/A1:2019 and was approved by CENELEC (parallel vote) in August 2019 and published in March 2020. The amendment updates specific requirements and figures relevant to the safe design, manufacture and assessment of transportable bench grinders and supports essential requirements of applicable EU Directives (see informative Annex ZZ).
Key topics and requirements
- Scope extension (clarification): The amendment explicitly covers type 1 grinding wheels with a maximum diameter of 310 mm and thickness not exceeding 55 mm (see newly added Figure 106).
- Normative references: The amendment replaces the normative references clause to state that the clause of Part 1 is applicable, reinforcing that general requirements in EN/IEC 62841‑1 apply to this part.
- Illustrative material: A new Figure 106 (Type 1 grinding wheel) was added after Figure 105 to clarify wheel geometry and designation.
- Standards governance: Prepared by IEC TC 116 (Safety of motor-operated electric tools); adopted by CENELEC without modification. Implementation and withdrawal timelines for national standards are defined (national implementation by publication date, withdrawal of conflicting standards by the specified dow).
Practical applications and users
This amendment is directly relevant to:
- Manufacturers and designers of transportable bench grinders - for product design, safety features and component selection (e.g., wheel sizing).
- Test laboratories and conformity assessors - to verify compliance with updated wheel size limits, figures and the Part 1 normative framework.
- Safety engineers and quality managers - to ensure workplace equipment meets European safety requirements.
- Regulatory bodies and notified bodies - when assessing conformity with EU Directives referenced in Annex ZZ for CE marking and market access.
Practical uses include design validation, risk assessment, conformity testing and documentation required for CE marking and national standard adoption.
Related standards
- EN/IEC 62841-3-4 (base publication) - Particular requirements for transportable bench grinders.
- EN/IEC 62841-1 - General safety requirements for electric motor-operated tools (Part 1 norms apply).
- IEC 62841-3-4:2016/A1:2019 - International amendment on which the EN amendment is based.
Keywords: EN 62841-3-4:2016/A1:2020, transportable bench grinders, safety standard, IEC 62841-3-4, type 1 grinding wheel, CENELEC, Annex ZZ, bench grinder standard.
Frequently Asked Questions
SIST EN 62841-3-4:2016/A1:2020 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016/A1:2019)". This standard covers: Next steps: the formal vote of the European Amendment 2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.
Next steps: the formal vote of the European Amendment 2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.
SIST EN 62841-3-4:2016/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 25.080.50 - Grinding and polishing machines; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 62841-3-4:2016/A1:2020 has the following relationships with other standards: It is inter standard links to SIST EN 62841-3-4:2016/A12:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 62841-3-4:2016/A1:2020 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 62841-3-4:2016/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2020
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
4. del: Posebne zahteve za prenosne namizne brusilnike - Dopolnilo A1 (IEC 62841
-3-4:2016/A1:2019)
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
(IEC 62841-3-4:2016/A1:2019)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen für
transportable Tischschleifmaschinen (IEC 62841-3-4:2016/A1:2019)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-4: Exigences particulières pour les tourets à meuler transportables
(IEC 62841-3-4:2016/A1:2019)
Ta slovenski standard je istoveten z: EN 62841-3-4:2016/A1:2020
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62841-3-4:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2020
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-4: Particular
requirements for transportable bench grinders
(IEC 62841-3-4:2016/A1:2019)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-4: Exigences transportable Werkzeuge und Rasen- und
particulières pour les tourets à meuler transportables Gartenmaschinen - Sicherheit - Teil 3-4: Besondere
(IEC 62841-3-4:2016/A1:2019) Anforderungen für transportable Tischschleifmaschinen
(IEC 62841-3-4:2016/A1:2019)
This amendment A1 modifies the European Standard EN 62841-3-4:2016; it was approved by CENELEC on 2019-08-06. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-3-4:2016/A1:2020 E
European foreword
The text of document 116/381/CDV, future IEC 62841-3-4/A1, prepared by IEC/TC 116 "Safety of
motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62841-3-4:2016/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-09-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...