SIST EN 60745-2-3:2011/oprAA:2013
(Amendment)Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu
D140/C009: NWI approved * ENQ + FV track * In hands of newly set up WG 4
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque
Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike
General Information
- Status
- Not Published
- Public Enquiry End Date
- 24-Feb-2013
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 14-Jan-2020
- Due Date
- 19-Jan-2020
- Completion Date
- 14-Jan-2020
Relations
- Effective Date
- 07-Jun-2022
Overview
EN 60745-2-3:2011/prAA:2012 is a CENELEC draft amendment to the European safety standard for hand-held motor-operated electric tools, specifically addressing grinders, polishers and disk-type sanders. The prAA amendment (Annex ZC) adds mandatory requirements for the measurement of inhalable and respirable dust emitted by concrete grinders and disk-type sanders, supporting regulatory compliance and worker health protection under EU directives.
Key topics and technical requirements
- Scope and status
- Amendment to EN 60745-2-3:2011; prepared by CLC/TC 116 and submitted for enquiry.
- Supports essential requirements of EU Directives for tool safety.
- Dust measurement (Annex ZC - normative)
- Defines measurement methods for inhalable and respirable dust emitted during operation.
- Applies specific test procedures and reporting requirements in addition to IEC/EN Part 1 and Part 2-3.
- Test procedures and operating conditions
- Concrete grinders: tested under load on concrete slabs (400×400 mm up to 600×600 mm; thickness 50 ±5 mm) stored dry for ≥3 weeks; slabs arranged on an A-support inclined at 15°.
- Material collected in dust extraction unit: minimum 1 200 g per test.
- Feed force adjusted to attain average power consumption of 70–90% of rated input.
- Disk-type sanders (processing quartz-containing materials, e.g., plaster fibreboard ~12.5 mm thick):
- Sheets placed on 15° A-support; sanding paper P80; maximum speed.
- Collected material minimums: 1 000 g for sanders ≤150 mm; 1 500 g for sanders >150 mm.
- Feed force to achieve 70–90% of rated power.
- Concrete grinders: tested under load on concrete slabs (400×400 mm up to 600×600 mm; thickness 50 ±5 mm) stored dry for ≥3 weeks; slabs arranged on an A-support inclined at 15°.
- Test report and instructions
- Test reports must include mean values for respirable dust concentration for tools tested under Annex ZC conditions.
- Normative references
- EN 1339 (concrete paving flags) is referenced for slab specifications.
- Annex clauses are prefixed “Z”; additions expand on IEC/EN baseline requirements.
Applications and who uses it
- Manufacturers of grinders, polishers and disk-type sanders - to design safer products and validate dust-control features (extraction, guards).
- Test laboratories and conformity assessors - to perform standardized dust-emission tests and produce compliant test reports.
- Health & safety professionals and compliance officers - to assess exposure risks and specify appropriate PPE, extraction, and work practices.
- Regulators and certification bodies - to enforce product safety and occupational exposure requirements.
Related standards
- IEC 60745-2-3 / EN 60745-2-3 (Part 2-3 baseline)
- EN 60745-1 (general requirements / Part 1 - referenced for common clauses)
- EN 1339 (concrete slab specifications)
Keywords: hand-held motor-operated electric tools, safety, grinders, polishers, disk-type sanders, dust measurement, respirable dust, inhalable dust, EN 60745-2-3, CENELEC, concrete grinders, disk-type sanders.
Frequently Asked Questions
SIST EN 60745-2-3:2011/oprAA:2013 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders". This standard covers: 2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu D140/C009: NWI approved * ENQ + FV track * In hands of newly set up WG 4
2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu D140/C009: NWI approved * ENQ + FV track * In hands of newly set up WG 4
SIST EN 60745-2-3:2011/oprAA:2013 is classified under the following ICS (International Classification for Standards) categories: 25.080.50 - Grinding and polishing machines; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60745-2-3:2011/oprAA:2013 has the following relationships with other standards: It is inter standard links to SIST EN 60745-2-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60745-2-3:2011/oprAA:2013 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 60745-2-3:2011/oprAA:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2013
(OHNWULþQDURþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHSHVNDOQLNH
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-3:2011/prAA:2012
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 60745-2-3
prAA
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM
ICS
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-3: Règles particulières pour les Sicherheit -
meuleuses, lustreuses et ponceuses du type à Teil 2-3: Besondere Anforderungen für
disque Schleifer, Polierer und Schleifer mit
Schleifblatt
This draft amendment prAA, if approved, will modify the European Standard EN 60745-2-3:2011; it is submitted to
CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2013-05-10.
It has been drawn up by CLC/TC 116.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German). A version in
any other language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a European Standard.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 23760 Ref. No. EN 60745-2-3:2011/prAA:2012 E
1 Foreword
2 This document [EN 60745-2-3:2011/prAA:2012] has been prepared by CLC/TC 116 "Safety of motor-
3 operated electric tools".
4 This document is currently submitted to the Enquiry.
5 This document has been prepared under a mandate given to CENELEC by the European Commission
6 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
7 This amendment was developed to set out requirements for the measurement of the concentration for
8 inhalable and respirable dust emitted by concrete grinders or disc-type sanders.
9 Clauses, subclauses, notes, tables and figures which are additional to those in IEC 60745-2-3 are
10 prefixed “Z”.
11 Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101;
12 additional annexes are lettered AA, BB, etc.
– 3 – EN 60745-2-3:2011/prAA:2012
13 Text of prAA to EN 60745-2-3:2011
14 Annexes
15 Add the following new Annex:
16 Annex ZC
17 (normative)
19 Dust measurement
20 ZC.1 Scope
21 This clause of Part 1 is applicable except as follows:
22 Addition:
23 Annex ZC applies to the measurement of the concentration for inhalable and respirable dust emitted
24 by concrete grinders or disc-type sanders.
25 ZC.2 Normative references
26 This clause of Part 1 is applicable except as follows:
27 Addition:
28 EN 1339:2003, Concrete paving flags – Requirements and test methods
29 ZC.3 Terms and definitions
30 This clause of Part 1 is applicable except as follows:
31 Addition:
32 ZC.3.101
33 concrete grinder
34 tool intended for smoothing and deburring concrete surfaces by means of diamond wheels
35 ZC.4 Test procedure
36 This clause of Part 1 is applicable except as follows:
37 ZC.4.3 Operating conditions
38 Addition:
39 Concrete grinders are tested under l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...