iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61181:1997

(Main)

Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Specifies analysis requirements and procedures, and recommends sensitivity and precision criteria for factory testing of power transformers, reactors and instrument transformers.

Getränkte Isolierstoffe - Verwendung der Gasanalyse für gelöste Gase (DGA) als Werksprüfung für elektrische Betriebsmittel

Matériaux isolants imprégnés - Application de l'analyse des gaz dissous (DGA) lors d'essais en usine de matériels électriques

Spécifie les modes opératoires, les exigences analytiques et les procédures, et recommande les critères de fidélité et de sensibilité pour les essais en usine des transformateurs de puissance, des bobines d'inductance et des transformateurs de mesure.

Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 1181:1993)

General Information

Status
Withdrawn
Publication Date
31-Jul-1997
Withdrawal Date
08-Jul-2010
ICS
29.040.01 - Insulating fluids in general
Technical Committee
TPD - Fluids for electrotechnical applications
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
24-Jun-2010
Due Date
17-Jul-2010
Completion Date
09-Jul-2010
Ref Project
EN 61181:1993 - Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

Relations

Replaced By
SIST EN 61181:2010 - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
Effective Date
06-May-2014
Replaced By
SIST EN 61181:2010 - Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
Effective Date
28-Jan-2023

Buy Standard

EN 61181:1997EN 61181:1997
PreviousNext
Standard
EN 61181:1997
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61181:1997
01-avgust-1997
Impregnated insulating materials - Application of dissolved gas analysis (DGA) to
factory tests on electrical equipment (IEC 1181:1993)
Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory
tests on electrical equipment
Getränkte Isolierstoffe - Verwendung der Gasanalyse für gelöste Gase (DGA) als
Werksprüfung für elektrische Betriebsmittel
Matériaux isolants imprégnés - Application de l'analyse des gaz dissous (DGA) lors
d'essais en usine de matériels électriques
Ta slovenski standard je istoveten z: EN 61181:1993
ICS:
29.040.01 Izolacijski fluidi na splošno Insulating fluids in general
SIST EN 61181:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61181:1997

---------------------- Page: 2 ----------------------

SIST EN 61181:1997

---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60475:2022(Main)
Method of sampling insulating liquids
EN IEC 60475:2022

This document is applicable to the sampling procedure used for insulating liquids in delivery
containers and in electrical equipment such as power and instrument transformers, reactors,
bushings, oil-filled cables, oil-filled tank-type capacitors, switchgear and load tap changers
(LTCs).
This document applies to liquids the viscosity of which at the sampling temperature is less than
1 500 mm2/s (or cSt). It applies to mineral oils and non-mineral oils (such as synthetic esters,
natural esters, vegetable oils or silicones).

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63012:2019(Main)
Insulating liquids - Unused modified or blended esters for electrotechnical applications
EN IEC 63012:2019

This Standard defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications. Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered by other standards specific to natural esters (IEC 62770) or synthetic esters (IEC 61099). As it addresses various categories of liquids, this document also covers a wide range of values for certain performance characteristics. An important property is viscosity, which can affect the design and cooling performance of electrical equipment. A categorization is defined based on the kinematic viscosity of the different liquids. The category of low viscosity ester liquids is established.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62961:2019(Main)
Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
EN IEC 62961:2018

This document establishes the measurement of the interfacial tension between insulating
liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In
order to obtain a value that provides a realistic expression of the real interfacial tension, a
measurement after a surface age of approximately 180 s is recorded.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60836:2015(Main)
Specifications for unused silicone insulating liquids for electrotechnical purposes
EN 60836:2015

This International Standard covers specifications and test methods for unused silicone liquids
intended for use in transformers and other electrotechnical equipment.
The specified characteristics of silicone transformer liquid classified as L-NTUK-8360300 (in
accordance with IEC 61039) are described in Table 1.
Besides the standard transformer applications there are other applications of silicone liquids,
such like cable accessories, capacitors, electrical magnets etc. The specified characteristics
and minimum requirements for these liquids are described in Table 2.
NOTE Maintenance of used silicone liquid in electrotechnical equipment is covered in a separate publication
IEC 60944.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62770:2014(Main)
Fluids for electrotechnical applications - Unused natural esters liquids for transformers and similar electrical equipment
EN 62770:2014

EN IEC 62770 describes specifications and test methods for unused natural esters in transformers and similar oil-impregnated electrical equipment in which a liquid is required as an insulating and heat transfer medium. Use of natural esters is not recommended for electrical equipment that is open to the atmosphere. In this standard the term “natural esters” applies to insulating fluids for transformers and similar electrical equipment with suitable biodegradability and environmental compatibility. Such natural esters are vegetable oils obtained from seeds and oils obtained from other suitable biological materials and delivered to an agreed point, at a set time period. These oils are comprised of triglycerides. Natural esters with additives are within the scope of this standard. Because of their different chemical composition, natural esters differ from insulating mineral oils and other insulating fluids that have high fire points, such as synthetic esters or silicone fluids. Natural, ester-derived insulating fluids with low viscosity have been introduced but are not covered by this standard. Pertinent properties of such fluids are given in Annex B. This standard is applicable only to unused natural esters. Reclaimed natural esters and natural esters blended with non-natural esters fluids are beyond the scope of this standard. The chemical nomenclature and scientific notations used in the standard are in accordance with the IUPAC handbook (Quantities, Units and Symbols in Physical Chemistry).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62697-1:2013(Main)
Test method for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
EN 62697-1:2012

This part of IEC 62697 specifies a test method for the quantitative determination of corrosive sulfur compounds-dibenzyl disulfide (DBDS) in used and unused insulating liquids over a 5 - 600 mg kg-1 concentration range.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61181:2010/A1:2012(Amendment)
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
EN 61181:2007/A1:2012

This International Standard specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA techniques to factory testing is during the performance of long-term tests, typically temperature-rise (heat run) and overloading tests on power transformers and reactors, also impulse tests on instrument transformers. DGA may also be valuable for over-excitation tests run over an extended period of time. Experience with DGA results, before and after short-time dielectric tests, indicates that DGA is normally less sensitive than electrical and acoustic methods for detecting partial discharges. However, DGA will indicate when these partial discharges become harmful to the insulation and may be detected by inspection.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60475:2012(Main)
Method of sampling insulating liquids
EN 60475:2011

IEC 60475:2011 is applicable to the procedure to be used for insulating liquids in delivery containers and in electrical equipment such as power and instrument transformers, reactors, bushings, oil-filled cables, oil-filled tank-type capacitors, switchgear and load tap changers. The main changes with respect to the previous edition are as follows:  - withdrawal of askarels;  - addition of recommendations concerning general health, safety and environmental protection;  - additional details regarding the sampling of oil from electrical equipment, using various types of sampling devices appropriate for the different types of oil tests to be performed in the laboratory.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61099:2011
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes (IEC 61099:2010)
EN 61099:2010

This International Standard covers the specification and test methods for unused synthetic organic esters. It applies to synthetic organic esters, delivered to the agreed point and time of delivery intended, for use in transformers, switchgear and similar related equipment in which synthetic organic esters are required as an insulant and for heat transfer. These unused synthetic organic esters are obtained by chemical processing and physical treatments of fatty acids and polyols.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61181:2010
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:2007)
EN 61181:2007

This International Standard specifies oil-sampling procedures, analysis requirements and procedures, and recommends sensitivity, repeatability and accuracy criteria for the application of dissolved gas analysis (DGA) to factory testing of new power transformers, reactors and instrument transformers filled with mineral insulating oil when DGA testing has been specified. The most effective and useful application of DGA techniques to factory testing is during the performance of long-term tests, typically temperature-rise (heat run) and overloading tests on power transformers and reactors, also impulse tests on instrument transformers. DGA may also be valuable for over-excitation tests run over an extended period of time. Experience with DGA results, before and after short-time dielectric tests, indicates that DGA is normally less sensitive than electrical and acoustic methods for detecting partial discharges. However, DGA will indicate when these partial discharges become harmful to the insulation and may be detected by inspection.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day