SIST ISO 19119:2005/Amd 1:2009
(Amendment)Geographic information - Services AMENDMENT 1: Extensions of the service metadata model
Geographic information - Services AMENDMENT 1: Extensions of the service metadata model
Amandma A1:2009 je dodatek k standardu SIST ISO 19119:2005
The scope of this International Standard is as follows: Identification and definition of the architecture patterns for service interfaces used for geographic information and definition of the relationships to the Open Systems Environment model. This International Standard presents a geographic services taxonomy and a list of example geographic services placed in the services taxonomy. This International Standard prescribes how to create a platform-neutral service specification, and how to derive platform-specific service specifications that are conformant with this. This International Standard provides guidelines for the selection and specification of geographic services from both platform-neutral and platform-specific perspectives.
Information géographique — Services AMENDEMENT 1: Extensions du modèle de métadonnées du service
Geografske informacije - Storitve DOPOLNILO 1: Razširitve metamodela storitev
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 19119
First edition
2005-02-15
AMENDMENT 1
2008-05-01
Geographic information — Services
AMENDMENT 1: Extensions of the service
metadata model
Information géographique — Services
AMENDEMENT 1: Extensions du modèle de métadonnées du service
Reference number
ISO 19119:2005/Amd.1:2008(E)
©
ISO 2008
---------------------- Page: 1 ----------------------
ISO 19119:2005/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19119:2005/Amd.1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 19119:2005 was prepared by Technical Committee ISO/TC 211, Geographic
information/Geomatics.
Amendement 1 to ISO 19119:2005 focuses on extensions of the service metadata model, concerning a more
detailed description of associated dataset of a service instance.
© ISO 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 19119:2005/Amd.1:2008(E)
Geographic information — Services
AMENDMENT 1: Extensions of the service metadata model
Page 19, 7.4.1, Para 3 (starting with “A service instance may be tightly coupled with a dataset instance, …”)
Add the following.
A single service instance may have both kinds of data associated, loosely and tightly coupled. In this case, the
instance is “mixed c
...
SLOVENSKI STANDARD
SIST ISO 19119:2005/Amd 1:2009
01-maj-2009
Geografske informacije - Servisi in druge storitve
DOPOLNILO 1: Razširitve servisnega metamodela
Geographic information - Services
AMENDMENT 1: Extensions of the service metadata model
Information géographique — Services
AMENDEMENT 1: Extensions du modèle de métadonnées du service
Ta slovenski standard je istoveten z: ISO 19119:2005/Amd 1:2008
ICS:
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST ISO 19119:2005/Amd 1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 19119:2005/Amd 1:2009
---------------------- Page: 2 ----------------------
SIST ISO 19119:2005/Amd 1:2009
INTERNATIONAL ISO
STANDARD 19119
First edition
2005-02-15
AMENDMENT 1
2008-05-01
Geographic information — Services
AMENDMENT 1: Extensions of the service
metadata model
Information géographique — Services
AMENDEMENT 1: Extensions du modèle de métadonnées du service
Reference number
ISO 19119:2005/Amd.1:2008(E)
©
ISO 2008
---------------------- Page: 3 ----------------------
SIST ISO 19119:2005/Amd 1:2009
ISO 19119:2005/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 19119:2005/Amd 1:2009
ISO 19119:2005/Amd.1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 19119:2005 was prepared by Technical Committee ISO/TC 211, Geographic
information/Geomatics.
Amendement 1 to ISO 19119:2005 focuses on extensions of the service metadata model, concerning a more
detailed description of associated dataset of a service instance.
© ISO 2008 – All rights reserved iii
---------------------- Page: 5 --
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.