SIST EN 54-29:2015/oprA1:2017
(Amendment)Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection systems installed in buildings (see EN 54 1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one heat sensor. The overall fire detection performance is determined utilizing the combination of the detected phenomena.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke and heat sensors to this EN.
Point detectors using a combination of smoke and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e.g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method).
NOTE Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this European Standard.
Brandmeldeanlagen - Teil 29: Mehrfachsensor-Brandmelder - Punktförmige Melder mit kombinierten Rauch- und Wärmesensoren
Diese Europäische Norm legt Anforderungen, Prüfverfahren und Leistungsmerkmale für punktförmige Mehrfachsensor-Brandmelder fest, die in Brandmeldeanlagen für Gebäude (siehe EN 54 1:2011) eingesetzt werden, und die in einem mechanischen Gehäuse mindestens einen Rauchsensor nach dem Durchlicht- oder Ionisationsprinzip und mindestens einen Wärmesensor enthalten. Ihre Gesamtleistung bei der Brandmeldung ergibt sich aus der Kombination der erkannten Brandphänomene.
Diese Europäische Norm enthält die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP, en: assessment and verification of constancy of performance) von punktförmigen Meldern mit kombinierten Rauch- und Wärmesensoren nach dieser Europäischen Norm.
Punktförmige Melder mit kombinierten Rauch- und Wärmesensoren, die über spezielle Eigenschaften verfügen und zur Erkennung spezieller Brandrisiken geeignet sind, werden in der vorliegenden Europäischen Norm nicht behandelt. Die Leistungsanforderungen an alle zusätzlichen Funktionen fallen nicht in den Anwendungsbereich dieser Europäischen Norm (z. B. werden in dieser Europäischen Norm für zusätzliche Merkmale oder für eine verbesserte Funktionstüchtigkeit keine Prüf- oder Bewertungsverfahren festgelegt).
ANMERKUNG Bestimmte Meldertypen enthalten radioaktive Stoffe. Die nationalen Anforderungen zum Schutz gegen radioaktive Strahlung sind in den einzelnen Ländern unterschiedlich und werden in der vorliegenden Europäischen Norm nicht festgelegt.
Systèmes de détection et d'alarme incendie - Partie 29 : Détecteurs d'incendie multi-capteurs - Détecteurs ponctuels utilisant une combinaison de capteurs de fumée et de chaleur
La présente Norme européenne spécifie les exigences, les méthodes d'essai et les critères de performance pour les détecteurs d'incendie ponctuels multicapteurs destinés à être utilisés dans les systèmes de détection d'incendie installés dans les bâtiments (voir l'EN 54-1:2011), incorporant dans une seule enveloppe mécanique au moins un capteur de fumée optique ou à ionisation et au moins un capteur de chaleur. La performance globale de détection du feu est déterminée en utilisant la combinaison des phénomènes détectés.
La présente Norme européenne prévoit l'évaluation et la vérification de la constance des performances (EVCP) des détecteurs ponctuels utilisant une combinaison de capteurs de fumée et de chaleur, par rapport à la présente Norme européenne.
Les détecteurs ponctuels, utilisant une combinaison de capteurs de fumée et de chaleur possédant des caractéristiques particulières appropriées pour la détection de risques d'incendies spécifiques, ne sont pas couverts par la présente Norme européenne. Les exigences de performance relatives à toute autre fonction ne relèvent pas du domaine d'application de la présente Norme européenne (par exemple, des caractéristiques supplémentaires ou une fonctionnalité améliorée pour lesquelles la présente Norme européenne ne définit pas d'essai ou de méthode d'évaluation).
NOTE Certains types de détecteurs contiennent des matières radioactives. Les exigences nationales de radioprotection variant d'un pays à l'autre, celles-ci ne sont pas spécifiées dans la présente Norme européenne.
Sistemi za odkrivanje in javljanje požara ter alarmiranje - 29. del: Večsenzorski javljalniki požara - Točkovni javljalniki s senzorjema za zaznavanje dima in toplote - Dopolnilo A1
General Information
- Status
- Not Published
- Public Enquiry End Date
- 19-Oct-2017
- Technical Committee
- POZ - Požarna varnost
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 05-Feb-2019
- Due Date
- 10-Feb-2019
- Completion Date
- 05-Feb-2019
Relations
- Effective Date
- 01-Oct-2017
Overview
EN 54-29:2015/prA1 is a CEN European standard for multi-sensor point fire detectors that combine smoke and heat sensing in a single enclosure. It defines requirements, test methods and performance criteria for point-type detectors used in building fire detection systems (referencing EN 54-1). The document also covers the assessment and verification of constancy of performance (AVCP) for these detectors. The amendment prA1 introduces clarifications and marking requirements, including formal definitions for optical and ionisation smoke sensors.
Key topics and requirements
- Scope and exclusions
- Applies to point multi-sensor detectors incorporating at least one smoke sensor (optical or ionisation) and at least one heat sensor.
- Excludes detectors with special characteristics for specific fire risks and any additional functions for which tests are not defined in this standard.
- Performance and test methods
- Specifies performance criteria and standardized test methods to assess combined smoke-and-heat detection performance.
- AVCP provisions for consistent manufacturing quality and conformity assessment.
- Definitions added by amendment (prA1)
- Type A - optical: smoke sensor sensitive to combustion products affecting absorption or scattering of radiation (IR, visible, UV).
- Type B - ionisation: smoke sensor sensitive to combustion products affecting ionisation currents.
- Marking and identification
- Amendment requires marking of functional principle (Type A and/or Type B).
- For Type B detectors containing radioactive components, prA1 mandates use of the trefoil symbol and specific head/base marking rules for detachable detectors.
- Relationship with other standards
- Intended for use within EN 54 fire detection family; ties to EN 54-1 for system-level requirements.
Applications and users
- Manufacturers - design, test and certify multi-sensor point detectors to meet EN 54-29 performance and AVCP requirements.
- Notified bodies & test laboratories - perform standardized type testing and factory production control assessments.
- System designers and specifiers - select compliant detectors for commercial, residential and industrial building fire alarm systems.
- Installers and maintenance teams - follow marking information (type, model, trefoil where applicable) for correct installation and regulatory compliance.
- Authorities having jurisdiction & building owners - rely on EN 54-29 conformity for procurement and safety verification.
Related standards
- EN 54-1 (system requirements)
- Other EN 54 parts covering specific detector types and system components
Keywords: EN 54-29:2015/prA1, multi-sensor fire detectors, point detectors, smoke and heat sensors, Type A optical, Type B ionisation, trefoil symbol, AVCP, CEN, EN 54.
Frequently Asked Questions
SIST EN 54-29:2015/oprA1:2017 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors". This standard covers: This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection systems installed in buildings (see EN 54 1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one heat sensor. The overall fire detection performance is determined utilizing the combination of the detected phenomena. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke and heat sensors to this EN. Point detectors using a combination of smoke and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e.g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method). NOTE Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this European Standard.
This European Standard specifies requirements, test methods and performance criteria for point-type multi-sensor fire detectors for use in fire detection systems installed in buildings (see EN 54 1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one heat sensor. The overall fire detection performance is determined utilizing the combination of the detected phenomena. This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke and heat sensors to this EN. Point detectors using a combination of smoke and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e.g. additional features or enhanced functionality for which this European Standard does not define a test or assessment method). NOTE Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this European Standard.
SIST EN 54-29:2015/oprA1:2017 is classified under the following ICS (International Classification for Standards) categories: 13.220.20 - Fire protection; 13.320 - Alarm and warning systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 54-29:2015/oprA1:2017 has the following relationships with other standards: It is inter standard links to SIST EN 54-29:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 54-29:2015/oprA1:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/109. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 54-29:2015/oprA1:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2017
6LVWHPL]DRGNULYDQMHLQMDYOMDQMHSRåDUDWHUDODUPLUDQMH GHO 9HþVHQ]RUVNL
MDYOMDOQLNLSRåDUD7RþNRYQLMDYOMDOQLNLVVHQ]RUMHPD]D]D]QDYDQMHGLPDLQWRSORWH
'RSROQLOR$
Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point
detectors using a combination of smoke and heat sensors
Brandmeldeanlagen - Teil 29: Mehrfachsensor-Brandmelder - Punktförmige Melder mit
kombinierten Rauch- und Wärmesensoren
Systèmes de détection et d'alarme incendie - Partie 29 : Détecteurs d'incendie multi-
capteurs - Détecteurs ponctuels utilisant une combinaison de capteurs de fumée et de
chaleur
Ta slovenski standard je istoveten z: EN 54-29:2015/prA1
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 54-29:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2017
ICS 13.220.20
English Version
Fire detection and fire alarm systems - Part 29: Multi-
sensor fire detectors - Point detectors using a combination
of smoke and heat sensors
Systèmes de détection et d'alarme incendie - Partie 29 : Brandmeldeanlagen - Teil 29: Mehrfachsensor-
Détecteurs d'incendie multi-capteurs - Détecteurs Brandmelder - Punktförmige Melder mit kombinierten
ponctuels utilisant une combinaison de capteurs de Rauch- und Wärmesensoren
fumée et de chaleur
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 72.
This draft amendment A1, if approved, will modify the European Standard EN 54-29:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...