SIST EN 3138:2002
(Main)Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
This standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.
Luft- und Raumfahrt - Vollniete, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA PA2601, passiviert, Inch-Reihe
Diese Norm legt die Eigenschaften von Vollnieten, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA2601, passiviert, Inch-Reihe, zur Verwendung bei Temperaturen bis 750 °C, fest.
Série aérospatiale - Rivets ordinaires, a tete fraisée 100° normale avec dôme, en acier résistant a la corrosion FE-PA2601, passivés, série base inches
La présente norme spécifie les caractéristiques des rivets ordinaires, à tête fraisée 100° normale avec dôme, en acier résistant à la corrosion FE-PA2601, passivés, série base inches, pour température maximale d'utilisation 750 °C.
Aerospace series - Rivets, solid, 100-countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
General Information
- Status
- Published
- Publication Date
- 31-Dec-2001
- Technical Committee
- SS SPL - Technical Board for the general field
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2002
- Due Date
- 01-Jan-2002
- Completion Date
- 01-Jan-2002
Overview
EN 3138:2001 (CEN) specifies the characteristics of solid aerospace rivets with a 100° countersunk normal head with dome, manufactured from corrosion resisting steel FE-PA2601, passivated, inch‑based series. The standard covers form, material, surface treatment and identification for rivets intended for service up to 750 °C. EN 3138 is intended for aerospace applications requiring corrosion resistance and elevated temperature performance.
Key topics and requirements
- Rivet geometry and configuration
- 100° countersunk normal head with dome; chamfer or convex radius allowed at the manufacturer’s option.
- Tail end options identified by code (e.g., non‑radiused tail “N”, radiused tail “R”); drill‑start code optional.
- Dimensions and tolerances are specified and apply after surface treatment (values are given in the standard; dimensions are expressed in millimetres).
- Material
- Base material: corrosion resisting steel FE-PA2601 (see EN 2119 for wire and heat treatment requirements).
- Surface treatment
- Passivation requirements referenced to EN 2516.
- Marking and identification
- Marking style and requirements referenced to EN 2424 (style G).
- Standard designation and part coding example format provided (e.g., EN3138-024009R1).
- Quality and approval
- Manufacturer quality system and approval per EN 2000.
- Technical specification and additional corrosion/heat resisting requirements referenced to ISO 2898.
- Performance limits
- Maximum operating temperature specified: 750 °C.
- Data tables
- The standard includes diameter and length code tables, approximate mass per 1 000 pieces, and dimensional figures.
Applications
EN 3138 rivets are used where:
- High temperature capability (up to 750 °C) and corrosion resistance are required.
- Flush countersunk joints are needed for aerodynamic surfaces or space‑constrained assemblies.
- Typical aerospace applications include structural airframe assemblies, engine and exhaust system components, heat‑exposed joints and other high‑temperature fastening points.
Who uses this standard
- Aerospace manufacturers and OEMs specifying fasteners for aircraft and propulsion systems.
- Fastener and rivet suppliers producing FE‑PA2601 rivets in inch series.
- Quality assurance, procurement and certification teams requiring standard compliant identification and supplier approval (EN 2000).
- Design and stress engineers selecting fasteners for elevated temperature and corrosion‑resistant applications.
Related standards
- ISO 10299 (solid rivet identification)
- EN 2119 (FE‑PA2601 material/wire requirements)
- EN 2516 (passivation of corrosion resisting steels)
- EN 2424 (marking of aerospace products)
- EN 2000 (manufacturer quality approval)
- ISO 2898 (technical specification for corrosion and heat resisting rivets)
Keywords: EN 3138, aerospace rivets, FE‑PA2601, passivated stainless steel, 100° countersunk rivet, inch based rivets, high temperature fasteners.
Frequently Asked Questions
SIST EN 3138:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series". This standard covers: This standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.
This standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.
SIST EN 3138:2002 is classified under the following ICS (International Classification for Standards) categories: 49.030.60 - Rivets. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3138:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Rivets, solid, 100-countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based seriesLuft- und Raumfahrt - Vollniete, mit 100° normalem Senkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA PA2601, passiviert, Inch-ReiheSérie aérospatiale - Rivets ordinaires, a tete fraisée 100° normale avec dôme, en acier résistant a la corrosion FE-PA2601, passivés, série base inchesAerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series49.030.60KoviceRivetsICS:Ta slovenski standard je istoveten z:EN 3138:2001SIST EN 3138:2002en01-januar-2002SIST EN 3138:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3138June 2001ICS 49.030.60English versionAerospace series - Rivets, solid, 100° countersunk normal headwith dome, in corrosion resisting steel FE-PA2601, passivated,inch based seriesSérie aérospatiale - Rivets ordinaires, à tête fraisée 100°normale avec dôme, en acier résistant à la corrosion FE-PA2601, passivés, série base inchesLuft- und Raumfahrt - Vollniete, mit 100° normalemSenkkopf mit Dom, aus korrosionsbeständigem Stahl FE-PA2601, passiviert, Zoll-ReiheThis European Standard was approved by CEN on 28 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3138:2001 ESIST EN 3138:2002
Page 2EN 3138:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall bewithdrawn at the latest by December 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 3138:2002
Page 3EN 3138:20011ScopeThis standard specifies the characteristics of solid rivets, with 100° countersunk normal head with dome, incorrosion resisting steel FE-PA2601, passivated, inch based series, for maximum operating temperature 750 °C.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated referen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...