iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12181:2000

(Main)

Oropharyngeal airways

Oropharyngeal airways

This European Standard specifies requirements for oropharyngeal airways of plastics materials and/or rubber, including those with a reinforcement insert made of plastics materials and/or metal. Metal oropharyngeal airways are excluded from the scope of this European Standard.

Oropharyngealtuben

Diese Europäische Norm legt Maße und Anforderungen für Oropharyngealtuben aus Kunststoff und/oder Gummi, mit oder ohne Verstärkungseinsatz aus Kunststoff oder Metall, fest. Sie gilt nicht für Oropharyngealtuben aus Metall.

Canules oro-pharyngées

La présente norme européenne spécifie les prescriptions relatives aux canules oro-pharyngées en matiere plastique et/ou en caoutchouc, notamment celles qui comportent un renfort inséré en matiere plastique et/ou en métal. Les canules oro-pharyngéeqs en métal sont exclues du domaine d'application de la présente norme européenne.

Ustnožrelne (orofaringealne) dihalne cevke

General Information

Status
Withdrawn
Publication Date
31-Dec-1999
Withdrawal Date
01-Jun-2011
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
Technical Committee
VAZ - Healthcare
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2011
Due Date
24-Jun-2011
Completion Date
02-Jun-2011
Ref Project
EN 12181:1998 - Oropharyngeal airways

Relations

Replaced By
SIST EN ISO 5364:2011 - Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008)
Effective Date
01-Jul-2011

Buy Standard

EN 12181:2000EN 12181:2000
PreviousNext
Standard
EN 12181:2000
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ustnožrelne (orofaringealne) dihalne cevkeOropharyngealtubenCanules oro-pharyngéesOropharyngeal airways11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 12181:1998SIST EN 12181:2000en01-januar-2000S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10651-4:2023(Main)
Lung ventilators - Part 4: Particular requirements for user-powered resuscitators (ISO 10651-4:2023)
EN ISO 10651-4:2023

This document specifies requirements for user-powered resuscitators intended for use with all age groups and which are intended to provide lung ventilation to patients whose breathing is inadequate. User-powered resuscitators are designated according to ideal body mass range.
Example user-powered resuscitators include:
—    self-inflating bag resuscitators intended to be squeezed by the user’s hand and refilled by elastic recoil; and
NOTE 1    Self-inflating bag resuscitators are generally transit-operable and can be used in a wide range of environmental and emergency situations.
—    flow-inflating bag resuscitators intended to be squeezed by the user’s hand and refilled by a flow from a medical gas source.
This document is also applicable to those accessories that are intended for use with resuscitators where the characteristics of those accessories can affect the safety of the user-powered resuscitator.
Examples of such accessories include face masks, PEEP valves, capnometric indicators, manometers, metronomes, flow restrictors, filters, gas refill valves, oxygen gas mixers, connectors, electronic feedback devices, electronic sensors and transmission of data to other equipment.
This document is also applicable to point-of-use packaging.
This document does not specify the requirements for:
—    gas-powered emergency resuscitators, which are given in ISO 10651-5;
—    electrically-powered resuscitators;
—    gas powered resuscitators for professional healthcare facilities; and
—    anaesthetic reservoir bags, which are given in ISO 5362.
NOTE 2    This document has been prepared to address the relevant essential principles[24] and labelling[25] guidances of the International Medical Devices Regulators Forum (IMDRF) as indicated in Annex D.
NOTE 3    This document has been prepared to address the relevant essential principles of safety and performance of ISO 16142-1:2016 as indicated in Annex E.
NOTE 4    This document has been prepared to address the relevant general safety and performance requirements of European regulation (EU) 2017/745[23] as indicated in Annex F.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5361:2023(Main)
Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2023)
EN ISO 5361:2023

This document provides specific requirements for the basic safety and essential performance for oro-tracheal and naso-tracheal tubes and tracheal tube connectors, tracheal tubes with walls reinforced with metal or plastic, tracheal tubes with shoulders, tapered tracheal tubes, tracheal tubes with means for suctioning, monitoring or delivery of drugs or other gases, and the many other types of tracheal tubes devised for specialized applications.
Tracheobronchial (including endobronchial) tubes (see ISO 16628), tracheostomy tubes (see ISO 5366), and supralaryngeal airways (see ISO 11712) are excluded from the scope of this document.
Tracheal tubes intended for use with flammable anaesthetic gases or agents, lasers, or electrosurgical equipment are outside the scope of this document.
NOTE 1      There is guidance or rationale for this clause contained in Annex A.2.
NOTE 2      ISO 11990-1, ISO 11990-2, and ISO 14408 deal with laser surgery of the airway.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21917:2023(Main)
Anaesthetic and respiratory equipment - Voice prostheses (ISO 21917:2021)
EN ISO 21917:2022

This document specifies performance requirements for voice prostheses including requirements for marking, packaging and information to be provided by the manufacturer as well as test methods for the evaluation of physical characteristics of voice prostheses.
NOTE      There is guidance or rationale for this list item contained in A.2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18778:2023(Main)
Respiratory equipment - Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors (ISO 18778:2022)
EN ISO 18778:2022

This document applies to the basic safety and essential performance of an infant cardiorespiratory monitor, as defined in 3.10, hereafter also referred to as ME equipment, in combination with its accessories:
—    intended for use in the home healthcare environment;
—    intended for use by a lay operator;
—    intended to monitor cardiorespiratory parameters in sleeping or resting children under three years of age; and
—    intended for transit-operable use.
NOTE       An infant cardiorespiratory monitor can also be used in professional health care facilities.
This document is also applicable to those accessories intended by their manufacturer to be connected to the infant cardiorespiratory monitor, where the characteristics of those accessories can affect the basic safety or essential performance of the infant cardiorespiratory monitor.
EXAMPLE        probes, cables distributed alarm system

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23368:2022(Main)
Anaesthetic and respiratory equipment - Low-flow nasal cannulae for oxygen therapy (ISO 23368:2022)
EN ISO 23368:2022

This device-specific standard specifies requirements for nasal cannulae used in both home-care and hospital environments for the administration of oxygen therapy.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80601-2-13:2022(Main)
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2022)
EN ISO 80601-2-13:2022

EN-ISO 80601-2-13 is applicable to the basic safety and essential performance of an anaesthetic workstation for administering inhalational anaesthesia whilst continuously attended by a professional operator.This document specifies particular requirements for a complete anaesthetic workstation and the following anaesthetic workstation components which, although considered as individual devices in their own right, may be utilized, in conjunction with other relevant anaesthetic workstation components, to form an anaesthetic workstation to a given specification: - anaesthetic gas delivery system; - anaesthetic breathing system; - anaesthetic gas scavenging system (AGSS); - anaesthetic vapour delivery system; - anaesthetic ventilator; monitoring equipment; - alarm system; - protection device.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23371:2022(Main)
Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices (ISO 23371:2022)
EN ISO 23371:2022

This document specifies essential performance and safety requirements for cuff pressure indicators
used to indicate the intracuff pressure of airway devices, such as supralaryngeal airways, tracheal tubes
or tracheostomy tubes.
This document is also applicable to devices that combine intracuff pressure indication with a method
of cuff inflation (such as a syringe or pump). The device can also provide a method of automatically
maintaining cuff inflation at a specific pressure or within a pressure range.
The requirements specified in this document apply to stand-alone cuff pressure indicators and those
integrated into other medical devices (e.g. ventilators, anaesthesia workstations, etc.).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16628:2022(Main)
Anaesthetic and respiratory equipment - Tracheobronchial tubes (ISO 16628:2022)
EN ISO 16628:2022

This document specifies requirements for safety, materials, design and information supplied with
tracheobronchial tubes. These devices are used when isolation of the airways of one or both lungs is
required.
Tracheal tubes that include bronchus blockers are excluded from the scope of this document.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10079-3:2022(Main)
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2022)
EN ISO 10079-3:2022

This document specifies basic safety and performance requirements for medical suction equipment
powered from a vacuum or positive pressure gas source generating venturi suction. It applies to suction
equipment connected to medical gas pipeline systems or cylinders and venturi attachments and can be
standalone or part of an integrated system.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23372:2022(Main)
Anaesthetic and respiratory equipment - Air entrainment devices (ISO 23372:2022)
EN ISO 23372:2022

This document specifies minimum performance and safety requirements for air entrainment devices
used for delivery of designated oxygen concentrations to patients. It provides a test method to check
the accuracy of the oxygen concentration in the air/oxygen mixture generated by the air entrainment
devices. Air entrainment devices can be fixed to deliver a single oxygen concentration or adjustable, to
deliver a range of oxygen concentration outputs.
This document also specifies marking requirements and recommends an optional system of colour
coding to assist the user in identifying the designated oxygen concentration.
This document does not cover air entrainment devices which are integral with medical devices specified
in other standards (e.g. emergency lung ventilators, humidifiers, nebulizers).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day