SIST EN ISO 9073-16:2009

SLOVENSKI STANDARD
01-januar-2009
7HNVWLOLMH0HWRGHSUHVNXãDQMDYODNQRYLQGHO8JRWDYOMDQMHRGSRUQRVWLSURWL
SHQHWUDFLML]YRGRKLGURVWDWLþQLWODN,62
Textiles - Test methods for nonwovens - Part 16: Determination of resistance to
penetration by water (hydrostatic pressure) (ISO 9073-16:2007)
Textilien - Prüfverfahren für Vliesstoffe - Teil 16: Bewertung der Wasserdichtheit
(hydrostatischer Druckversuch) (ISO 9073-16:2007)
Textiles - Méthodes d'essai pour nontissés - Partie 16: Détermination de la résistance à
la pénétration de l'eau (pression hydrostatique) (ISO 9073-16:2007)
Ta slovenski standard je istoveten z: EN ISO 9073-16:2008
ICS:
59.080.30 Tkanine Textile fabrics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9073-16
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 59.080.30
English Version
Textiles - Test methods for nonwovens - Part 16: Determination
of resistance to penetration by water (hydrostatic pressure) (ISO
9073-16:2007)
Textiles - Méthodes d'essai pour nontissés - Partie 16: Textilien - Prüfverfahren für Vliesstoffe - Teil 16: Bewertung
Détermination de la résistance à la pénétration de l'eau der Wasserdichtheit (hydrostatischer Druckversuch) (ISO
(pression hydrostatique) (ISO 9073-16:2007) 9073-16:2007)
This European Standard was approved by CEN on 25 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9073-16:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
The text of ISO 9073-16:2007 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9073-16:2008 by
Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by April 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9073-16:2007 has been approved by CEN as a EN ISO 9073-16:2008 without any
modification.
INTERNATIONAL ISO
STANDARD 9073-16
First edition
2007-12-01
Textiles — Test methods for
nonwovens —
Part 16:
Determination of resistance to
penetration by water (hydrostatic
pressure)
Textiles — Méthodes d'essai pour nontissés —
Partie 16: Détermination de la résistance à la pénétration de l'eau
(pression hydrostatique)
Reference number
ISO 9073-16:2007(E)
©
ISO 2007
ISO 9073-16:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved

ISO 9073-16:2007(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principle. 2
5 Apparatus . 2
6 Calibration . 4
7 Procedure . 4
8 Calculation. 5
9 Test report . 5
Annex A (informative) General information regarding reproducibility . 7

ISO 9073-16:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9073-16 was prepared by Technical Committee ISO/TC 38, Textiles.
ISO 9073 consists of the following parts, under the general title Textiles — Test methods for nonwovens:
⎯ Part 1: Determination of mass per unit area
⎯ Part 2: Determination of thickness
⎯ Part 3: Determination of tensile strength and elongation
⎯ Part 4: Determination of tear resistance
⎯ Part 5: Resistance to mechanical penetration (ball burst procedure)
⎯ Part 6: Absorption
⎯ Part 7: Determination of bending length
⎯ Part 8: Determination of liquid strike-through time (simulated urine)
⎯ Part 9: Determination of drapability including drape coefficient
⎯ Part 10: Lint and other particles gene
...