SIST EN 61000-4-18:2007/A1:2011
(Amendment)Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to: a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations; b) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in gas insulated substations (GIS) and in some cases also air insulated substations (AIS) or in any installation due to HEMP phenomena. The object of this basic standard is to establish the immunity requirements and a common reference for evaluating in a laboratory the performance of electrical and electronic equipment intended for residential, commercial and industrial applications, as well as of equipment intended for power stations and substations, as applicable.
Elektromagnetische Verträglichkeit (EMV) - Teil 4-18: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen gedämpft schwingende Wellen
Compatibilité électromagnétique (CEM) - Partie 4-18: Techniques d'essai et de mesure - Essai d'immunité à l'onde oscillatoire amortie
Elektromagnetna združljivost (EMC) - 4-18. del: Preskusne in merilne tehnike - Preskus odpornosti proti nihajnemu valu - Dodatek A1 (IEC 61000-4-18:2006/A1:2010)
Ta del IEC 61000 se nanaša na zahteve za odpornost in preskusne metode za električno in elektronsko opremo pod delovnimi pogoji v zvezi s: a) ponavljajočimi se nihajnimi valovi, do katerih večinoma prihaja pri napajalnih, nadzornih in signalnih kablih, nameščenih v visokonapetostnih in srednjenapetostnih (VN/SN) razdelilnih postajah; b) ponavljajočimi se nihajnimi valovi, do katerih prihaja večinoma pri napajalnih, nadzornih in signalnih kablih, nameščenih v plinsko izoliranih razdelilnih postajah (GIS) in v nekaterih primerih tudi v zračno izoliranih razdelilnih postajah (AIS) ali v kateri koli inštalaciji zaradi pojava HEMP. Cilj tega osnovnega standarda je vzpostavitev zahtev za odpornost in splošne reference za laboratorijsko ocenjevanje delovanja električne in elektronske opreme za bivalno, gospodarsko in industrijsko uporabo ter opreme za električne centrale in razdelilne postaje, kakor je primerno.
General Information
- Status
- Withdrawn
- Publication Date
- 11-Apr-2011
- Withdrawal Date
- 08-Mar-2026
- Technical Committee
- EMC - Electromagnetic compatibility
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 04-Mar-2026
- Due Date
- 27-Mar-2026
- Completion Date
- 09-Mar-2026
Relations
- Effective Date
- 01-Sep-2019
- Referred By
kSIST FprEN 1776:2025 - Gas infrastructure - Gas measuring systems - Functional requirements - Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
TL 9000 QuEST Forum
Telecommunications quality management system.
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
Sponsored listings
Frequently Asked Questions
SIST EN 61000-4-18:2007/A1:2011 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test". This standard covers: This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to: a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations; b) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in gas insulated substations (GIS) and in some cases also air insulated substations (AIS) or in any installation due to HEMP phenomena. The object of this basic standard is to establish the immunity requirements and a common reference for evaluating in a laboratory the performance of electrical and electronic equipment intended for residential, commercial and industrial applications, as well as of equipment intended for power stations and substations, as applicable.
This part of IEC 61000-4 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, with regard to: a) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in high voltage and medium voltage (HV/MV) substations; b) repetitive damped oscillatory waves occurring mainly in power, control and signal cables installed in gas insulated substations (GIS) and in some cases also air insulated substations (AIS) or in any installation due to HEMP phenomena. The object of this basic standard is to establish the immunity requirements and a common reference for evaluating in a laboratory the performance of electrical and electronic equipment intended for residential, commercial and industrial applications, as well as of equipment intended for power stations and substations, as applicable.
SIST EN 61000-4-18:2007/A1:2011 is classified under the following ICS (International Classification for Standards) categories: 33.100.20 - Immunity. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 61000-4-18:2007/A1:2011 has the following relationships with other standards: It is inter standard links to SIST EN IEC 61000-4-18:2019, kSIST FprEN 1776:2025, SIST EN 267:2020, SIST EN 62340:2010, SIST EN IEC 60143-4:2024, SIST EN IEC 61226:2021, SIST EN 61226:2010, SIST EN IEC 61869-13:2021, SIST EN 60947-4-3:2014, SIST EN 61869-6:2017, SIST EN 61000-1-2:2016, SIST EN 61674:2013, SIST EN 60947-4-2:2012, SIST EN 60255-26:2014, SIST EN IEC 61674:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 61000-4-18:2007/A1:2011 is associated with the following European legislation: EU Directives/Regulations: 2004/108/EC, 2004/108/EU, 2014/30/EU; Standardization Mandates: M/490. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 61000-4-18:2007/A1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2011
Elektromagnetna združljivost (EMC) - 4-18. del: Preskusne in merilne tehnike -
Preskus odpornosti proti nihajnemu valu - Dodatek A1 (IEC 61000-4-
18:2006/A1:2010)
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques -
Damped oscillatory wave immunity test
Elektromagnetische Verträglichkeit (EMV) - Teil 4-18: Prüf- und Messverfahren - Prüfung
der Störfestigkeit gegen gedämpft schwingende Wellen
Compatibilité électromagnétique (CEM) - Partie 4-18: Techniques d'essai et de mesure -
Essai d'immunité à l'onde oscillatoire amortie
Ta slovenski standard je istoveten z: EN 61000-4-18:2007/A1:2010
ICS:
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61000-4-18/A1
NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM
ICS 33.100.20
English version
Electromagnetic compatibility (EMC) -
Part 4-18: Testing and measurement techniques -
Damped oscillatory wave immunity test
(IEC 61000-4-18:2006/A1:2010)
Compatibilité électromagnétique (CEM) - Elektromagnetische Verträglichkeit
Partie 4-18: Techniques d'essai (EMV) -
et de mesure - Teil 4-18: Prüf- und Messverfahren -
Essai d'immunité à l'onde oscillatoire Prüfung der Störfestigkeit gegen gedämpft
amortie schwingende Wellen
(CEI 61000-4-18:2006/A1:2010) (IEC 61000-4-18:2006/A1:2010)
This amendment A1 modifies the European Standard EN 61000-4-18:2007; it was approved by CENELEC on
2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-18:2007/A1:2010 E
Foreword
The text of document 77B/604/CDV, future amendment 1 to IEC 61000-4-18:2006, prepared by SC 77B,
High frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61000-4-18:2007
on 2010-07-01.
Attention is drawn to the possibility that s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...