SIST EN ISO 20957-9:2017/A1:2019
(Amendment)Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
Stationäre Trainingsgeräte - Ellipsen-Trainer, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren - Änderung 1 (ISO 20957-9:2016/Amd 1:2019)
Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest.
Dieser Teil von ISO 20957 legt sicherheitstechnische Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Nutzers mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, die in stehender oder sitzender Position betrieben werden.
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques, exigences spécifiques de sécurité et méthodes d'essai supplémentaires - Amendement 1 (ISO 20957-9:2016/Amd 1:2019)
Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne zahteve in preskusne metode - Dopolnilo A1 (ISO 20957-9:2016/Amd 1:2019)
General Information
Relations
Overview
EN ISO 20957-9:2016/A1:2019 is the CEN-endorsed amendment to ISO 20957-9 addressing stationary training equipment - Part 9: elliptical trainers. It updates the original 2016 text with additional, clarifying safety requirements and test method changes for elliptical trainers used in indoor sports and fitness environments. The amendment was prepared by ISO/TC 83 in collaboration with CEN/TC 136 and adopted for use across CEN member countries.
Key topics and requirements
This amendment focuses on additional specific safety requirements and test methods for elliptical trainers. Key technical points include:
- Clarification of test procedures for protective and entrapment zones using a test foot probe.
- A specific change to clause 6.2: the test foot probe must be positioned below a height of 600 mm measured from the floor, ensuring at least three probe contact points (points A) rest on the floor and/or equipment.
- Formalization of test set-up and measurement rules to improve repeatability of safety tests and conformity assessment.
Note: the amendment text endorses the ISO 20957-9:2016 content without modifying the original standard beyond the listed amendment(s).
Applications and who uses this standard
EN ISO 20957-9:2016/A1:2019 is intended for stakeholders involved in the design, manufacture, testing, supply and procurement of elliptical trainers:
- Manufacturers and product designers - to ensure equipment meets recognized safety and test-method expectations.
- Testing laboratories and conformity assessors - to apply the specified test setup (including the updated foot-probe requirement) when verifying compliance.
- Certification bodies and regulatory authorities - for harmonized evaluation criteria across Europe.
- Gym operators and procurement teams - to reference in specifications and purchase decisions that prioritize user safety.
- Standards professionals and consultants - for guidance on harmonized European adoption and implementation.
Related standards
- ISO 20957 series - other parts of the stationary training equipment family covering different equipment types and general safety principles.
- Documents prepared by ISO/TC 83 and CEN/TC 136 relevant to indoor sports equipment safety.
EN ISO 20957-9:2016/A1:2019 supports consistent, repeatable safety testing of elliptical trainers and aids manufacturers and test houses in implementing harmonized test methods (e.g., the updated test foot probe placement) to reduce risk and improve product conformity across markets.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne
zahteve in preskusne metode - Dopolnilo A1 (ISO 20957-9:2016/Amd 1:2019)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety
requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
Stationäre Trainingsgeräte - Ellipsen-Trainer, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren - Änderung 1 (ISO 20957-
9:2016/Amd 1:2019)
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques,
exigences spécifiques de sécurité et méthodes d'essai supplémentaires - Amendement 1
(ISO 20957-9:2016/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 20957-9:2016/A1:2019
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20957-9:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 97.220.30
English Version
Stationary training equipment - Part 9: Elliptical trainers,
additional specific safety requirements and test methods -
Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
Équipement d'entraînement fixe - Partie 9: Appareils Stationäre Trainingsgeräte - Ellipsen-Trainer,
d'entraînement elliptiques, exigences spécifiques de zusätzliche besondere sicherheitstechnische
sécurité et méthodes d'essai supplémentaires - Anforderungen und Prüfverfahren - Änderung 1 (ISO
Amendement 1 (ISO 20957-9:2016/Amd 1:2019) 20957-9:2016/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 20957-9:2016; it was approved by CEN on 14 June 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-9:2016/A1:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20957-9:2016/A1:2019) has been prepared by Technical Committee ISO/TC 83
"Sports and other recreational facilities and equipment" in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This Amendment to the European Standard EN ISO 20957-9:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2019,
and conflicting national standards shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, De
...
Frequently Asked Questions
SIST EN ISO 20957-9:2017/A1:2019 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)". This standard covers: Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest. Dieser Teil von ISO 20957 legt sicherheitstechnische Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Nutzers mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, die in stehender oder sitzender Position betrieben werden.
Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest. Dieser Teil von ISO 20957 legt sicherheitstechnische Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Nutzers mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, die in stehender oder sitzender Position betrieben werden.
SIST EN ISO 20957-9:2017/A1:2019 is classified under the following ICS (International Classification for Standards) categories: 97.220.30 - Indoor sports equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 20957-9:2017/A1:2019 has the following relationships with other standards: It is inter standard links to SIST EN ISO 20957-9:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 20957-9:2017/A1:2019 is associated with the following European legislation: EU Directives/Regulations: 2001/95/EC; Standardization Mandates: M/506. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN ISO 20957-9:2017/A1:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...