SIST EN IEC 60974-1:2023/A12:2023

SLOVENSKI STANDARD
SIST EN IEC 60974-1:2023/A12:2023
01-december-2023
Oprema za obločno varjenje - 1. del: Viri varilnega toka - Dopolnilo A12
Arc welding equipment - Part 1: Welding power sources
Lichtbogenschweißeinrichtungen - Teil 1: Schweißstromquellen
Matériel de soudage à l'arc - Partie 1: Sources de courant de soudage
Ta slovenski standard je istoveten z: EN IEC 60974-1:2022/A12:2023
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN IEC 60974-1:2023/A12:2023 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60974-1:2023/A12:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60974-1:2023/A12:2023


EUROPEAN STANDARD EN IEC 60974-1:2022/A12

NORME EUROPÉENNE

EUROPÄISCHE NORM November 2023
ICS 25.160.30

English Version
Arc welding equipment - Part 1: Welding power sources
Matériel de soudage à l'arc - Partie 1: Sources de courant Lichtbogenschweißeinrichtungen - Teil 1:
de soudage Schweißstromquellen
This amendment A12 modifies the European Standard EN IEC 60974-1:2022; it was approved by CENELEC on 2023-09-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60974-1:2022/A12:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60974-1:2023/A12:2023
EN IEC 60974-1:2022/A12:2023 (E)
European foreword
This document (EN IEC 60974-1:2022/A12:2023) has been prepared by CLC/TC 26 “Electric welding".
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-09-20
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2026-09-20
conflicting with this document have to be
withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZZA, which is an integral part of this
document, and Annex ZZB, which is an integral part of EN IEC 60974-1:2022/A11:2022.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60974-1:2023/A12:2023
EN IEC 60974-1:2022/A12:2023 (E)
1 Replacement of Annex ZZA, “Relationship between this European standard and
the safety objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be covered”
Replace Annex ZZA with the following:
“
3

---------------------- Page: 5 ----------------------
SIST EN IEC 60974-1:2023/A12:2023
EN IEC 60974-1:2022/A12:2023 (E)
Annex ZZA
(informative)

Relationship between this European standard and the safety objectives
of Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European standard has been prepared under a Commission’s standardisation request relating to
harmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means of
conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26
February 2014 on the h
...