iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 834-1:1999/Amd 1:2012

(Amendment)

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1

Essai de résistance au feu — Éléments de construction — Partie 1: Exigences générales — Amendement 1

Preskusi požarne odpornosti - Gradbeni elementi - 1. del: Splošne zahteve - Dopolnilo A1

General Information

Status
Published
Publication Date
05-Jan-2012
ICS
13.220.50 - Fire-resistance of building materials and elements
Technical Committee
ISO/TC 92/SC 2 - Fire containment
Drafting Committee
ISO/TC 92/SC 2/WG 1 - General requirements
Current Stage
6060 - International Standard published
Due Date
13-Nov-2012
Completion Date
06-Jan-2012
Ref Project
SIST ISO 834-1:2021/A1:2021 - Fire-resistance tests - Elements of building construction - Part 1: General requirements - AMENDMENT 1

Relations

Amends
ISO 834-1:1999 - Fire-resistance tests — Elements of building construction — Part 1: General requirements
Effective Date
02-Jan-2021

Buy Standard

ISO 834-1:1999/Amd 1:2012ISO 834-1:1999/Amd 1:2012
PreviousNext
Standard
ISO 834-1:1999/Amd 1:2012
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 834-1:2021/A1:2021ISO 834-1:2021/A1:2021
PreviousNext
Amendment
ISO 834-1:2021/A1:2021
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL  ISO
STANDARD 834-1
First edition
1999-09-15
AMENDMENT 1
2012-01-15
Fire-resistance tests — Elements of
building construction —
Part 1:
General requirements
AMENDMENT 1
Essai de résistance au feu — Éléments de construction —
Partie 1: Exigences générales
AMENDEMENT 1
Reference number
ISO 834-1:1999/Amd.1:2012(E)
©
 ISO 2012

---------------------- Page: 1 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 834-1:1999 was prepared by Technical Committee ISO/TC 92, Fire safety, Subcommittee
SC 2, Fire containment.
© ISO 2012 – All rights reserved  iii

---------------------- Page: 3 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
Fire-resistance tests — Elements of building construction —
Part 1:
General requirements
AMENDMENT 1
Page iii, Foreword
Add ISO/TR 834-2 to the list of parts:
Part 2: Guidance on measuring uniformity of furnace exposure on test samples [Technical Report]
Page 4, 5.5.1.1
Replace the subheading with the following:
5.5.1.1  Furnace temperature thermocouples
Replace the first paragraph with the following:
The furnace thermocouples temperature shall be measured with plate thermometers which comprise an
assembly of a folded steel nickel alloy plate, the thermocouple fixed to it and containing insulation material.
The measuring and recording equipment shall be capable of operating within the limits specified in 5.6.
Page 5, 5.5.1.1
Replace the second paragraph with following:
The plate part shall be constructed from (150 ± 1) mm long by (100 ± 1) mm wide by (0,7 ± 0,1) mm
thick nickel alloy sheet strips folded to the design as shown in figure 1. The folded metal plate shall be
constructed from a strip of austenitic nicke
...

SLOVENSKI STANDARD
SIST ISO 834-1:2021/A1:2021
01-november-2021
Preskusi požarne odpornosti - Gradbeni elementi - 1. del: Splošne zahteve -
Dopolnilo A1
Fire-resistance tests - Elements of building construction - Part 1: General requirements -
AMENDMENT 1
Essai de résistance au feu - Éléments de construction - Partie 1: Exigences générales -
AMENDEMENT 1
Ta slovenski standard je istoveten z: ISO 834-1:1999/Amd 1:2012
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.01 Stavbni elementi na splošno Elements of buildings in
general
SIST ISO 834-1:2021/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 834-1:2021/A1:2021

---------------------- Page: 2 ----------------------
SIST ISO 834-1:2021/A1:2021
INTERNATIONAL  ISO
STANDARD 834-1
First edition
1999-09-15
AMENDMENT 1
2012-01-15
Fire-resistance tests — Elements of
building construction —
Part 1:
General requirements
AMENDMENT 1
Essai de résistance au feu — Éléments de construction —
Partie 1: Exigences générales
AMENDEMENT 1
Reference number
ISO 834-1:1999/Amd.1:2012(E)
©
 ISO 2012

---------------------- Page: 3 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 834-1:1999 was prepared by Technical Committee ISO/TC 92, Fire safety, Subcommittee
SC 2, Fire containment.
© ISO 2012 – All rights reserved  iii

---------------------- Page: 5 ----------------------
SIST ISO 834-1:2021/A1:2021

---------------------- Page: 6 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
Fire-resistance tests — Elements of building construction —
Part 1:
General requirements
AMENDMENT 1
Page iii, Foreword
Add ISO/TR 834-2 to the list of parts:
Part 2: Guidance on measuring uniformity of furnace exposure on test samples [Technical Report]
Page 4, 5.5.1.1
Replace the subheading with the following:
5.5.1.1  Furnace temperature thermocouples
Replace the first paragraph with the following:
The furnace
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 20902-2:2023(Main)
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 2: Additional procedures for pipe penetration and cable transit sealing systems

This document specifies a test methodology for determining the fire resistance of divisional elements with a fire protection system when subjected to cellulosic or hydrocarbon-pool type fire exposure conditions. This document describes additional test procedures for penetration and cable transit sealing systems intended for non-marine applications but suitable for offshore fixed and mobile installations. The test data thus obtained enables subsequent classification on the basis of the duration for which the performance of the divisional element under these conditions satisfies specified criteria.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 21843:2023(Main)
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels

This document specifies a test method for determining the fire resistance of pressure vessels with a fire protection system when subjected to standard fire exposure conditions. It does not address vessels cooled by water deluge or water monitor. The test data thus obtained permits subsequent classification on the basis of the duration for which the performance of the pressure vessel under these conditions satisfies specified criteria. The design of the pressure vessel is not covered in this document.

  • Standard
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
ISO
ISO 23693-1:2021(Main)
Determination of the resistance to gas explosions of passive fire protection materials — Part 1: General requirements

This document aims to simulate the mechanical loads that could be imparted to passive fire protection (PFP) materials and systems by explosions resulting from releases of flammable gas, pressurised liquefied gas or flashing liquid fuels that may precede a fire. This document can also be applicable to dust explosions. Gas explosions can give rise to pressure and drag forces. Damage to PFP materials in a gas explosion can be caused by the direct effects of pressure and drag loadings and by the deflection of the substrate supporting the PFP material. Other parts of the ISO 23693 series will deal with a range of common types of specimen that could be tested against the mechanical loads generated.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO 834-1:1999/Amd 2:2021(Amendment)
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2
  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 21524:2021(Main)
Fire resistance tests — Elements of building construction — Requirements for active fire curtains

This document specifies requirements for the design, testing and classification of active fire curtains, applicable to any material, that are designed to provide fire and smoke resistance. This document gives recommendations for the application, installation and maintenance of active fire curtains. It is also intended to provide guidance and recommendations for designers, specifiers (e.g. architects, fire engineers), authorities having jurisdiction (AHJs), installers and maintainers for the following: a) creating compartmentation; b) creating protected routes for the purpose of means of escape; c) providing protection at the location of non-fire resisting elements (e.g. in front of non-fire-resisting glazing and doorsets) where required for compartmentation or protecting means of escape; d) providing fire- and smoke-resistant active fire curtains in conjunction with non-smoke rated products protecting openings to reduce leakage of smoke. This document does not apply to the following, which are intended for a different use: — barriers made of part of the building’s structure; — theatre/proscenium textile curtains; — smoke barriers according to ISO 21927-1; — door and shutter assemblies according to ISO 3008‑1. NOTE 1 Smoke barriers used solely for smoke control are covered by ISO 21927‑1. Such smoke barriers are not considered to be active fire curtains. NOTE 2 Requirements of fire doors are given in ISO 3008-1. Requirements for leakage are given in ISO 5925‑1 and further information is given in ISO/TR 5925‑2.

  • Standard
    114 pages
    English language
    sale 15% off
  • Draft
    114 pages
    English language
    sale 15% off
ISO
ISO 22899-1:2021(Main)
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements

This document describes a method of determining the resistance to jet fires of passive fire protection materials and systems. It gives an indication of how passive fire protection materials behave in a jet fire and provides performance data under the specified conditions. It does not include an assessment of other properties of the passive fire protection material such as weathering, ageing, shock resistance, impact or explosion resistance, or smoke production. Complete I-beams and columns cannot be tested to this document due to disruption of the characteristics of the jet.

  • Standard
    43 pages
    English language
    sale 15% off
  • Draft
    43 pages
    English language
    sale 15% off
ISO
ISO 21925-2:2021(Main)
Fire resistance tests — Fire dampers for air distribution systems — Part 2: Intumescent dampers

This document specifies a test method for the determination of the resistance of fire dampers to heat, and for the evaluation of their ability to prevent fire and smoke from spreading from one fire compartment to another through an air distribution system. This document describes the test requirements related to intumescent fire dampers. It is intended for intumescent fire dampers that are expected to be classified as EI dampers. Without the addition of a mechanical damper, they are unable to achieve the “S” classification, which includes a leakage limit imposed at ambient temperature. This document is not intended to be used for dampers used only in smoke control systems, for testing fire protection devices which only deal with air transfer applications, or for dampers used in suspended ceilings, as the installation of the damper and duct can have an adverse effect on the performance of the suspended ceiling, requiring other methods of evaluation. NOTE "Air transfer" is a low-pressure application through a fire separation door (or wall, floor) without any connection to an air duct.

  • Standard
    44 pages
    English language
    sale 15% off
  • Draft
    44 pages
    English language
    sale 15% off
ISO
ISO 3008-4:2021(Main)
Fire resistance tests — Door and shutter assemblies — Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction

This document specifies a standard test methodology and resulting field of direct application which are applicable to linear joint fire seal materials used to seal around fire door sets which have been tested in accordance with ISO 3008‑1. The test methodology described in this document uses a smaller-scale fire resistance furnace than that prescribed in ISO 3008‑1.

  • Standard
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
ISO
ISO 834-2:2019(Main)
Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples

This document establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834‑1. This document specifies the type and location of instrumentation used to measure the temperature, velocity and oxygen content near the surface of simulated test samples. The surface of the simulated sample facing the furnace is gypsum board secured to cold-formed steel supports. This document does not include requirements for furnace performance. An intended use of data generated by the application of this document and the rational for the instrumentation described in this document are contained in the informative Annex A.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 834-13:2019(Main)
Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings

This document specifies a test and assessment method for determining the contribution made by fire protection systems to the fire resistance of structural steel beams, I and H sections, in the horizontal plane containing openings in the web which may affect the structural performance of the beam. It is applicable to beams subjected to three or four sided fire exposure. For any cellular beam with a single web opening or where the web openings are considered to be of small diameter in relation to the web depth the applicability of this document is intended to be determined by a structural engineer This document adopts the principle of establishing ratios of temperatures between and around openings in the web of a beam with the temperatures of a solid portion of that beam. This is with the intention that these data can be utilised within a structural model to derive the value and location of the associated limiting temperature of the beam at the fire limit state. The limiting temperature is then used in conjunction with data for the fire protection material determined from ISO 834-10 and ISO 834-11 to determine the necessary thickness of fire protection material for beams with web openings. This document applies to fire protection materials that have already been tested and assessed in accordance with ISO 834-10 and ISO 834-11 and is not intended to be used in isolation. It covers fire protection systems that include both passive and reactive materials which follow the section profile as defined in this document. This document includes the use of a multi-temperature analysis (MTA) derived from ISO 834-11 as the basis for determining the thickness of fire protection for beams with web openings. This document contains an assessment method, which prescribes how the analysis of the test data should be made and gives guidance on the procedures that could be undertaken. The assessment procedure can be used to establish: a) The thermal response of the fire protection system on cellular beams, (the thermal performance) on the basis of the temperature data derived from testing unloaded steel sections. b) The temperature ratio between the web post and the web reference temperature, which will vary depending on the web post width. c) The temperature ratio between points around the web openings and the web reference area. d) A structural model that can be used to derive limiting temperatures for cellular beams.

  • Standard
    29 pages
    English language
    sale 15% off