ISO 9903-1:2003
(Main)Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining
Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining
ISO 9903-1:2003 specifies the main dimensions for section wires for metallic card clothing with foot without interlocking or interchaining.
Matériel pour l'industrie textile — Dimensions principales des fils pour garnitures de carde — Partie 1: Profil sans talon autobloquant, ni enchaîné
L'ISO 9903-1:2003 spécifie les dimensions principales des fils pour garnitures de carde à profil sans talon autobloquant, ni enchaîné.
General Information
- Status
- Published
- Publication Date
- 02-Mar-2003
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 15-Mar-2024
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 15-Apr-2008
Overview
ISO 9903-1:2003 is an international standard published by the International Organization for Standardization (ISO) that specifies the main dimensions for section wires used in metallic card clothing for textile machinery. Specifically, Part 1 of this standard focuses on section wires with a foot profile that does not include interlocking or interchaining features. These specifications ensure uniformity and compatibility across textile machinery components, enhancing precision and efficiency in the textile industry.
The standard applies to metallic card clothing wires designed without the self-locking heel or interlinked profiles, establishing important dimensional criteria for manufacturers and users of these components.
Key Topics
- Scope: Defines main dimensions for metallic section wires with a flat or plain foot (no interlocking/interchaining).
- Dimensions: Precise measurements for wire height, foot thickness, and related profile features are outlined, ensuring consistent size and fit.
- Profile Type A: Covers the non-interlocking wire foot profile discussed in the document.
- Designation Method: A clear system for labeling the profiles by type and dimension to ensure unambiguous identification.
- Reference Documents: Relies on ISO 5234 for relevant textile machinery terminology and definitions.
Applications
ISO 9903-1:2003 is essential for manufacturers and engineers involved in the design, production, and maintenance of metallic card clothing used in textile machinery. The standardized dimensions enable:
- Manufacturing of card wires that fit machinery accurately without modification
- Interchangeability of components between different machinery suppliers
- Enhanced quality control and consistency in textile production lines
- Improved carding performance by ensuring compatible wire profiles that maintain fiber processing efficiency
- Easier specification and procurement process by providing a universally accepted dimensional reference
The standard supports sectors such as spinning mills, textile machinery manufacturers, and suppliers of card clothing accessories, contributing to optimized production workflows and reduced downtime.
Related Standards
For a complete understanding and effective application of ISO 9903-1, the following related standards and documents should be considered:
- ISO 5234: Textile machinery - Card clothing - Terms and definitions. This provides the fundamental terminology used within ISO 9903-1.
- ISO 9903-2: Covers section wires with self-locking heels and interchained profiles, complementing Part 1 by specifying dimensions for another common profile type.
- Other ISO standards in the textile machinery domain, such as those covering card clothing materials, durability testing, and machinery specifications.
Summary
ISO 9903-1:2003 standardizes the main dimensions of metallic card clothing section wires with a foot profile that excludes interlocking or interchaining features. By defining strict dimensional criteria for these wires, it streamlines production compatibility and quality in the textile machinery industry. Manufacturers and textile engineers benefit from clear guidelines on wire profiles, ensuring efficiency and interchangeability while supporting global quality standards.
Keywords: ISO 9903-1, textile machinery standards, metallic card clothing, section wire dimensions, non-interlocking foot profile, card clothing profiles, textile industry standards, card wire specifications, ISO textile standards, metallic card wire dimensions
ISO 9903-1:2003 - Textile machinery and accessories — Main dimensions for section wires for metallic card clothing — Part 1: Foot without interlocking or interchaining Released:3/3/2003
ISO 9903-1:2003 - Matériel pour l'industrie textile — Dimensions principales des fils pour garnitures de carde — Partie 1: Profil sans talon autobloquant, ni enchaîné Released:3/3/2003
Frequently Asked Questions
ISO 9903-1:2003 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining". This standard covers: ISO 9903-1:2003 specifies the main dimensions for section wires for metallic card clothing with foot without interlocking or interchaining.
ISO 9903-1:2003 specifies the main dimensions for section wires for metallic card clothing with foot without interlocking or interchaining.
ISO 9903-1:2003 is classified under the following ICS (International Classification for Standards) categories: 59.120.10 - Spinning, twisting and texturing machines. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 9903-1:2003 has the following relationships with other standards: It is inter standard links to ISO 9903:1991. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 9903-1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9903-1
First edition
2003-02-15
Textile machinery and accessories —
Main dimensions for section wires for
metallic card clothing —
Part 1:
Foot without interlocking or interchaining
Matériel pour l'industrie textile — Dimensions principales des fils pour
garnitures de carde —
Partie 1: Profil sans talon autobloquant, ni enchaîné
Reference number
©
ISO 2003
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may
...
NORME ISO
INTERNATIONALE 9903-1
Première édition
2003-02-15
Matériel pour l'industrie textile —
Dimensions principales des fils pour
garnitures de carde —
Partie 1:
Profil sans talon autobloquant, ni
enchaîné
Textile machinery and accessories — Main dimensions for section
wires for metallic card clothing —
Part 1: Foot without interlocking or interchaining
Numéro de référence
©
ISO 2003
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2003
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2003 — Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des élém
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...