ISO 19302:2018
(Main)Graphic technology — Colour conformity of printing workflows
Graphic technology — Colour conformity of printing workflows
This document defines the requirements of printing workflows and evaluation methods for their tone and colour reproduction. It applies to any printing process using any colourant, such as CMYK, CMYK with spot, non-CMYK, spot only or multicolour. This document refers and points to international or national standards and can be used to define, evaluate and audit any printing workflow in whole or in part.
Titre manque
Grafična tehnologija - Barvna skladnost grafičnih procesov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 19302:2020
01-april-2020
Grafična tehnologija - Barvna skladnost grafičnih procesov
Graphic technology - Colour conformity of printing workflows
Technologie graphique -- Évaluation de la conformité des couleurs des produits
imprimés
Ta slovenski standard je istoveten z: ISO 19302:2018
ICS:
37.100.01 Grafična tehnologija na Graphic technology in
splošno general
SIST ISO 19302:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 19302:2020
---------------------- Page: 2 ----------------------
SIST ISO 19302:2020
INTERNATIONAL ISO
STANDARD 19302
First edition
2018-12
Graphic technology — Colour
conformity of printing workflows
Reference number
ISO 19302:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
SIST ISO 19302:2020
ISO 19302:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 19302:2020
ISO 19302:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Printing workflow requirements . 3
4.1 Job colour definition . 3
4.1.1 General. 3
4.1.2 Digital file creation . 4
4.1.3 Graphic content . 4
4.1.4 Spot colour and device colour build . 4
4.2 Process colour reproduction . 5
4.2.1 Colour management . 5
4.2.2 Prepress . 6
4.2.3 Process control . 6
4.3 Product colour conformity . 7
4.3.1 General.
...
INTERNATIONAL ISO
STANDARD 19302
First edition
2018-12
Graphic technology — Colour
conformity of printing workflows
Reference number
ISO 19302:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 19302:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19302:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Printing workflow requirements . 3
4.1 Job colour definition . 3
4.1.1 General. 3
4.1.2 Digital file creation . 4
4.1.3 Graphic content . 4
4.1.4 Spot colour and device colour build . 4
4.2 Process colour reproduction . 5
4.2.1 Colour management . 5
4.2.2 Prepress . 6
4.2.3 Process control . 6
4.3 Product colour conformity . 7
4.3.1 General. 7
4.3.2 Print control . 7
4.3.3 Colour control. 7
5 Printing workflow standards requirements. 8
5.1 Job colour defin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.