iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 10155:1995/Cor 1:2002

(Corrigendum)

Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications — Technical Corrigendum 1

Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications — Technical Corrigendum 1

Émissions de sources fixes — Contrôle automatique des concentrations en masse de particules — Caractéristiques de fonctionnement, modes opératoires d'essai et spécifications — Rectificatif technique 1

Emisije nepremičnih virov - Avtomatski monitoring masne koncentracije delcev - Delovne karakteristike, preskusne metode in specifikacije - Popravek Cor. 1

General Information

Status
Published
Publication Date
06-Mar-2002
ICS
13.040.40 - Stationary source emissions
Technical Committee
ISO/TC 146/SC 1 - Stationary source emissions
Drafting Committee
ISO/TC 146/SC 1 - Stationary source emissions
Current Stage
6060 - International Standard published
Start Date
07-Mar-2002
Completion Date
13-Dec-2025
Ref Project
SIST ISO 10155:1996/Cor.1:2003 - Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications - Corrigendum Cor. 1

Relations

Consolidated By
ISO 1140:2012 - Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
Effective Date
06-Jun-2022
Corrects
ISO 10155:1995 - Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
Effective Date
06-Jun-2022
Child
ISO 10155:1995 - Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
Effective Date
15-Apr-2008
ISO 10155:1996/Cor.1:2003ISO 10155:1996/Cor.1:2003
PreviousNext
Corrigendum
ISO 10155:1996/Cor.1:2003
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2003
(PLVLMHQHSUHPLþQLKYLURY$YWRPDWVNLPRQLWRULQJPDVQHNRQFHQWUDFLMHGHOFHY
'HORYQHNDUDNWHULVWLNHSUHVNXVQHPHWRGHLQVSHFLILNDFLMH3RSUDYHN&RU
Stationary source emissions - Automated monitoring of mass concentrations of particles
- Performance characteristics, test methods and specifications - Corrigendum Cor. 1
Émissions de sources fixes - Contrôle automatique des concentrations en masse de
particules - Caractéristiques de fonctionnement, modes opératoires d'essai et
spécifications - Corrigendum Cor. 1
Ta slovenski standard je istoveten z: ISO 10155:1995/Cor 1:2002
ICS:
13.040.40 (PLVLMHQHSUHPLþQLKYLURY Stationary source emissions
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL STANDARD ISO 10155:1995
TECHNICAL CORRIGENDUM 1
Published 200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 13271:2012/Amd 1:2025(Amendment)
Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
SIST ISO 13271:2013/A1:2025
  • Standard
    3 pages
    English language
    sale 15% off
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 5409:2024(Main)
Stationary source emissions — Chemical absorption method for sampling and determining mercury species in flue gas
SIST ISO 5409:2025

This document describes a method for the sampling and determining mercury species in flue gas passing through ducts or chimney stacks. Mercury generally exists in gaseous elemental form, gaseous oxidized form and particulate-bound form. This method applies to the sampling and determination of gaseous elemental mercury (Hg0), gaseous oxidized mercury (Hg2+), particulate-bound mercury (HgP) and total mercury (HgT) in the flue gas from stationary sources. This method is suitable at locations with high dust content, including locations upstream of the dust removal device with high particulate loadings in flue gas up to 120 g/m3. This method is applicable to locations with sulfur dioxide (SO2) concentration up to 0,25 % when the sampling volume is 0,5 m3 (on a dry basis as corrected to standard conditions). The limit of detection and the limit of determination depend on the instrumental limit of detection, reagent blank, field blank, measurement technique and volume of sampled gas. When the sampling volume is 1,5 m3 (on a dry basis as corrected to standard conditions), the expected limits of detection for Hg0, HgP, Hg2+ and HgT are 0,103 μg/m3, 0,011 μg/m3, 0,035 μg/m3 and 0,127 μg/m3, respectively. The expected limits of determination for Hg0, HgP, Hg2+ and HgT are 0,229 μg/m3, 0,025 μg/m3, 0,082 μg/m3 and 0,263 μg/m3, respectively.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off
ISO
ISO 12141:2024(Main)
Stationary source emissions — Determination of low range mass concentration of dust — Manual gravimetric method
SIST ISO 12141:2025

This document specifies the standard reference method (SRM) for the measurement of low dust concentration in ducted gaseous streams in the concentrations below 50 mg/m3 at standard conditions. This document is primarily developed and validated for gaseous streams emitted by waste incinerators. More generally, it can be applied to gases emitted from other stationary sources, and to higher concentrations. If the gases contain unstable, reactive or semi-volatile substances, the measurement depends on the sampling and filter treatment conditions. This method has been validated in field tests with special emphasis to dust concentrations around 5 mg/m3. The results of the field tests are presented in Annex A.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
ISO
ISO 7935:2024(Main)
Stationary source emissions — Determination of the mass concentration of sulfur dioxide in flue gases — Performance characteristics of automated measuring systems
SIST ISO 7935:2025

This document specifies a method for the determination of sulfur dioxide (SO2) in flue gases of stationary sources and describes the fundamental structure and the key performance characteristics of automated measuring systems. The method allows continuous monitoring with permanently installed measuring systems of SO2 emissions. This document describes extractive systems and in situ (non-extractive) systems in connection with a range of analysers that operate using, for example, the following principles: — non-dispersive infrared absorption (NDIR); — Fourier transform infrared (FTIR) spectroscopy; — laser spectroscopic technique or tunable laser spectroscopy (TLS); — non-dispersive ultraviolet absorption (NDUV); — differential optical absorption spectroscopy (DOAS). Other equivalent instrumental methods can be used provided they meet the minimum performance requirements specified in this document. The measuring system can be validated with reference materials, according to this document, or comparable methods. Automated measuring system (AMS) based on the principles listed above has been used successfully in this application for the measuring ranges as shown in Annex E.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    43 pages
    English language
    sale 15% off
ISO
ISO 19694-7:2024(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 7: Semiconductor and display industries
SIST ISO 19694-7:2025

This document provides a methodology for calculating greenhouse gas (GHG) emissions from the semiconductor and display industry. This document includes the manufacture of semiconductor devices, microelectromechanical systems (MEMS), photovoltaic (PV) devices and displays. This document allows to report GHG emissions for various purposes and on different bases, such as a per-plant basis, per-company basis (by country or by region) or an international group basis. This document addresses all of the following direct and indirect sources of GHG: — direct GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 a)] from sources that are owned or controlled by the company, such as emissions resulting from the following sources: — process: fluorinated compound (FC) gases and nitrous oxide (N2O) used in etching and wafer cleaning (EWC), remote plasma cleaning (RPC), in situ plasma cleansing (IPC), in situ thermal cleaning (ITC), N2O thin film deposition (TFD), and other N2O using process; — fuel combustion related to equipment and on-site vehicles, room heating/cooling; — fuel combustion of fuels for on-site power generation; — indirect GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 b)] from the generation of imported electricity, heat or steam consumed by the organization. Other indirect GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 c) to f)], which are the consequence of an organization’s activities, but arise from GHG sources that are owned or controlled by other organizations, are excluded from this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    40 pages
    English language
    sale 15% off
ISO
ISO 15259:2023(Main)
Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report

This document specifies the following requirements: a) requirements for measurement sections and sites with respect to performing emission measurements; b) requirements for the measurement objective, plan and report of emission measurements of air pollutants and reference quantities to be carried out in waste gas ducts at industrial plants. This document applies to periodic measurements using manual or automated reference methods (RM). This document specifies generic principles which can be applied to perform emission measurements at different plant types and to meet different measurement objectives. NOTE The measurement objective is specified by the customer. The testing institute identifies the measurement objective and related regulatory requirements at the beginning of the measurement planning. Where measurements are being made for regulatory purposes, the customer should seek approval from the competent authority. This document specifies procedures for taking representative samples in waste gas ducts. This document specifies a procedure for finding the best available sampling point for automated measuring systems used for continuous monitoring of emissions. The planning and reporting aspects of this document are applicable to emission measurements at diffusive and fugitive emission sources. This document does not address aspects of structural safety of chimneys and ducts, construction of working platforms and safety of personnel using them.

  • Standard
    77 pages
    English language
    sale 15% off
  • Standard
    82 pages
    French language
    sale 15% off
ISO
ISO 19694-6:2023(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 6: Ferroalloys and silicon industry

This document provides a harmonized methodology for calculating GHG emissions from the ferro-alloys industry based on the mass balance approach. This document also provides key performance indicators over time for ferro-alloys plants. This document covers the following direct and indirect sources of GHG: — direct GHG emissions [see ISO 14064-1:2018, 5.2.4 a)] from sources that are owned or controlled by the company, such as emissions resulting from the following sources: — smelting (reduction) process; — decomposition of carbonates inside the furnace; — auxiliaries operation related to the smelting operation (i.e. aggregates, drying processes, heating of ladles, etc.); — indirect GHG emissions [see ISO 14064-1:2018, 5.2.4 b)] from the generation of purchased electricity consumed in the company’s owned or controlled equipment.

  • Standard
    26 pages
    English language
    sale 15% off
ISO
ISO 19694-3:2023(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 3: Cement industry

This document specifies a harmonized methodology for calculating greenhouse gas (GHG) emissions from the cement industry, with a view to reporting these emissions for various purposes and by different basis, such as, plant basis, company basis (by country or by region) or even international group basis. It addresses all the following direct and indirect sources of GHG included: — Direct GHG emissions [ISO 14064-1:2018, 5.2.4, a)] from sources that are owned or controlled by the organization, such as emissions that result from the following processes: — calcinations of carbonates and combustion of organic carbon contained in raw materials; — combustion of kiln fuels (fossil kiln fuels, alternative fossil fuels, mixed fuels with biogenic carbon content, biomass and bioliquids) related to either clinker production or drying of raw materials and fuels, or both; — combustion of non-kiln fuels (fossil fuels, alternative fossil fuels, mixed fuels with biogenic carbon content, biomass and bioliquids) related to equipment and on-site vehicles, room heating and cooling, drying of MIC (e.g. slag or pozzolana); — combustion of fuels for on-site power generation; — combustion of carbon contained in wastewater; — Indirect GHG emissions [ISO 14064-1:2018, 5.2.4, b)] from the generation of purchased electricity consumed in the organization’s owned or controlled equipment; — Other indirect GHG emissions [(ISO 14064-1:2018, 5.2.4, c) to f)] from purchased clinker. Excluded from this document are all other ISO 14064-1:2018, 5.2.4, c) to f) emissions from the cement industry.

  • Standard
    67 pages
    English language
    sale 15% off
ISO
ISO 19694-4:2023(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 4: Aluminium industry

This document specifies a harmonized method for calculating the emissions of greenhouse gases from the electrolysis section of primary aluminium smelters and aluminium anode baking plants. This document also specifies key performance indicators for the purpose of benchmarking of aluminium and boundaries.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 19694-5:2023(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 5: Lime industry

This document provides a harmonized methodology for calculating greenhouse gas (GHG) emissions from the lime industry. It includes the manufacture of lime and any downstream lime products manufactured at the plant, such as ground or hydrated lime. This document allows for reporting of GHG emissions for various purposes and on different basis, such as plant basis, company basis (by country or by region) or international organization basis. This document addresses all of the following direct and indirect sources of GHG included as defined in ISO 14064-1: — direct greenhouse gas emissions [see ISO 14064-1:2018, 5.2.4 a)] from greenhouse gas sources that are owned or controlled by the company, such as emissions resulting from the following sources: — calcination of carbonates and combustion of organic carbon contained in the kiln stone; — combustion of kiln fuels (fossil kiln fuels, alternative fossil fuels, mixed fuels with biogenic carbon content, biomass fuels and bio fuels) related to lime production and/or drying of raw materials; — combustion of non-kiln fuels (fossil kiln fuels, mixed fuels with biogenic carbon content, biomass fuels and bio fuels) related to equipment and on-site vehicles, heating/cooling and other on-site uses; — combustion of fuels for on-site power generation; — indirect greenhouse gas emissions [see ISO 14064-1:2018, 5.2.4 b)] from the generation of imported electricity, heat or steam consumed by the organization; — other indirect greenhouse gas emissions [see ISO 14064-1:2018, 5.2.4 c) to f)], which are a consequence of an organization's activities, but arise from greenhouse gas sources that are owned or controlled by other organizations, except emissions from imported kiln stone, are excluded from this document. This document is intended to be used in conjunction with ISO 19694-1, which contains generic, overall requirements, definitions and rules applicable to the determination of GHG emissions for all energy-intensive sectors, provides common methodological issues and defines the details for applying the rules. The application of this document to the sector-specific standards ensures accuracy, precision and reproducibility of the results.

  • Standard
    51 pages
    English language
    sale 15% off