ISO/TR 14564:1995
(Main)Shipbuilding and marine structures - Marking of escape routes
- BACK
- 22-Nov-1995
- 22-Nov-1995
- 47.020.01
- ISO/TC 8/SC 1
Shipbuilding and marine structures - Marking of escape routes
Relates to the marking of escape routes on board of ferries, passenger ships cargo ships etc.. Signs and posters which are used as marking are classified into categories in terms of purpose.
Construction navale et structures maritimes - Marquage des voies d'évacuation
General Information
This May Also Interest You
This document specifies the test methods for marine external firefighting systems after installation aboard, mainly including test preparation, test conditions, test apparatus and procedures. This document excludes the performance requirements of the equipment. This document is applicable to the testing of external firefighting systems installed on ships for the purpose of extinguishing fires occurring on other vessels, offshore structures or quayside structures. This document applies to marine external firefighting system with water or foam as the medium.
- Standard8 pagesEnglish languagesale 15% off
- 01-Jun-2023
- 47.020.01
- ISO/TC 8/SC 1
This document establishes design principles for shipboard escape plan signs that contain information relevant to escape, embarkation, and fire safety, to be used for general information on board ships. These plans are intended to be displayed as signs in cabins and public areas, such as required by regulations. This document is not intended to cover the plans to be used by crew. The plans for crew are described in ISO 17631.
- Standard15 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Draft15 pagesEnglish languagesale 15% off
- Draft15 pagesEnglish languagesale 15% off
- Draft16 pagesFrench languagesale 15% off
- 15-May-2023
- 47.020.01
- ISO/TC 8/SC 1
This document provides general provisions and minimum criteria for using virtual reality and simulator equipment and systems instead of live training and drills with lifesaving appliances and arrangements, such as those required by SOLAS and MODU Code. This document is not intended to provide a generic training programme for the purposes of meeting International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) requirements. This document serves to support the use of training devices (TD) onboard vessels that can deliver training and drills required by regulation, as well as additional non-obligatory training to crew. It is understood that training devices described in this document are used as an alternative to actual participation with and operations of lifesaving appliances (LSA) products during drills to meet mandatory training requirements.
- Standard16 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
- Draft16 pagesEnglish languagesale 15% off
- Draft16 pagesEnglish languagesale 15% off
- 07-Feb-2023
- 47.020.01
- ISO/TC 8/SC 1
This document specifies the content, type, design, layout and usage of shipboard and marine installation plans made available and displayed for fire control appliances and arrangements, damage control, lifesaving appliances and arrangements, and means of escape. It also specifies graphical symbols and illustrations used in such plans. It does not include signs and mimic signs that provide instructions for safe escape for general safety information.
- Standard28 pagesEnglish languagesale 15% off
- 06-Dec-2022
- 47.020.01
- ISO/TC 8/SC 1
This document establishes a uniform, safe and consistent approach to training and assessment of personnel to enable them to establish and maintain the required competencies in relation to maintenance, thorough examination, operational testing, overhaul and repair of lifeboats, rescue boats, launching appliances and release gear. It also provides the necessary information for interested parties to grant authorization and effectively evaluate and audit training, supporting the IMO Requirements, section 3. It specifies the initial training programme for personnel certified by a manufacturer or by an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. This document specifies the training requirements for initial service technician training only. This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-3 and ISO 23678-4. This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear. — Survival craft types: a) single fall totally enclosed lifeboats with sprinkler and air systems; b) twin fall totally enclosed lifeboats with sprinkler and air systems; c) partially enclosed lifeboats; d) tender lifeboats; e) freefall lifeboats; f) open lifeboat; g) inflatable rescue boats; h) rigid rescue boats; i) semi-ridged inflatable rescue boats; j) rigid fast rescue boats; k) rigid inflatable fast rescue boats. — Survival craft propulsion system types: a) inboard diesel engines; b) outboard engines; c) propeller drives; d) jet drives. — Davit types: a) gravity single and twin fall outrigger; b) hydraulic single pivoting/luffing; c) hydraulic multi pivot/luffing; d) telescopic; e) gravity roller track; f) gravity free fall primary; g) free fall hydraulic secondary; h) A-frame hydraulic; i) single arm slewing (manual, electric); j) davits with stored power systems. — Winch types: a) twin drum; b) single drum; c) gravity lowering, electric hoisting; d) gravity lowering, hydraulic hoisting; e) hydraulic hoisting and lowering. — Hook release system types: a) on-load/off load (load not over centre); b) on-load/offload (load over centre); c) off load; d) freefall hydraulic; e) automatic off load.
- Standard23 pagesEnglish languagesale 15% off
- 10-Aug-2022
- 03.100.30
- 47.020.01
- ISO/TC 8/SC 1
This document establishes a uniform, safe and consistent approach to the technical training of personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear. It also provides the necessary information for interested parties to grant authorization, effectively evaluate and audit training, supporting the IMO Requirements, section 3. It specifies the training requirements for the level 1 controlled environment education and technical training for personnel certified by a manufacturer or an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. The level 1 training is split into two stages, both covered in this document: — stage 1 service technician technical controlled environment education and training has five modules that consist of classroom-based theory followed by practical sessions. The five modules encompass the scope and range of technical knowledge and skills required to assume type-specific design coverage of survival craft, release systems, davits and winches. The modules focus on supporting the requirements in the IMO Requirements, section 8, paragraphs 8.1, 8.2.1.1 to 8.2.1.6, 8.2.2, and 8.2.3. — stage 2 service technician technical controlled environment experience and assessment requires candidates to undertake a minimum of four supervised scenarios-based practical exercises assessments covering the range of type specific complete systems for which they will be certified. This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-2 and ISO 23678-4. This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear. Survival craft types: a) single fall totally enclosed lifeboats with sprinkler and air systems; b) twin fall totally enclosed lifeboats with sprinkler and air systems; c) partially enclosed lifeboats; d) tender lifeboats; e) freefall lifeboats; f) open lifeboat; g) inflatable rescue boats; h) rigid rescue boats; i) semi-ridged inflatable rescue boats; j) rigid fast rescue boats; k) rigid inflatable fast rescue boats. Survival craft propulsion system types: a) inboard diesel engines; b) outboard engines; c) propeller drives; d) jet drives. Davit types: a) gravity single and twin fall outrigger; b) hydraulic single pivoting/luffing; c) hydraulic multi pivot/luffing; d) telescopic; e) gravity roller track; f) gravity free fall primary; g) free fall hydraulic secondary; h) A-frame hydraulic; i) single arm slewing (manual, electric); j) davits with stored power systems. Winch types: a) twin drum; b) single drum; c) gravity-lowering, electric hoisting; d) gravity-lowering hydraulic hoisting; e) hydraulic hoisting and lowering. Hook release system types: a) on-load/off load (load not over centre); b) on-load/offload (load over centre); c) off load; d) freefall hydraulic; e) automatic off load.
- Standard41 pagesEnglish languagesale 15% off
- 10-Aug-2022
- 03.100.30
- 47.020.01
- ISO/TC 8/SC 1
This document establishes a uniform, safe and consistent approach to training personnel to enable them to establish and maintain the required competencies in relation to maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear. It also provides the necessary information for interested parties to grant authorization and effectively evaluate and audit training, supporting the IMO Requirements, section 3. It describes the competence route, resources, facilities and certification requirements for personnel trained by a manufacturer or by an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. This document also sets out the competence route of the candidate, and the resources that the training provider needs to deliver the training. This document is intended to be used in conjunction with ISO 23678-2, ISO 23678-3 and ISO 23678-4.
- Standard26 pagesEnglish languagesale 15% off
- 10-Aug-2022
- 03.100.30
- 47.020.01
- ISO/TC 8/SC 1
This document establishes a uniform, safe and consistent approach to the in-field competence assessment of personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear. It also provides the necessary information for interested parties to grant authorization, effectively evaluate and audit training, supporting the IMO Requirements, section 3. It specifies the level 2 in-field initial and ongoing competence assessment for personnel certified by a manufacturer or an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. The training an individual receives while following a development process is covered in ISO 23678-2 and ISO 23678-3. The competence requirements contained in this document provide a clear description of performance in-field in respect to: a) what practitioners are expected to do; b) the underpinning knowledge and skills they require to enable them to do what is expected; c) how they can demonstrate what is expected of them; d) how their performance can be assessed. This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-2 and ISO 23678-3. This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear. Survival craft types: a) single fall totally enclosed lifeboats with sprinkler and air systems; b) twin fall totally enclosed lifeboats with sprinkler and air systems; c) partially enclosed lifeboats; d) tender lifeboats; e) freefall lifeboats; f) open lifeboat; g) inflatable rescue boats; h) rigid rescue boats; i) semi-ridged inflatable rescue boats; j) rigid fast rescue boats; k) rigid inflatable fast rescue boats. Survival craft propulsion system types: a) inboard diesel engines; b) outboard engines; c) propeller drives; d) jet drives. Davit types: a) gravity single and twin fall outrigger; b) hydraulic single pivoting/luffing; c) hydraulic multi pivot/luffing; d) telescopic; e) gravity roller track; f) gravity free fall primary; g) free fall hydraulic secondary; h) A-frame hydraulic; i) single arm slewing (manual, electric); j) davits with stored power systems. Winch types: a) twin drum; b) single drum; c) gravity-lowering, electric hoisting; d) gravity-lowering hydraulic hoisting; e) hydraulic hoisting and lowering. Hook release system types: a) on-load/off load (load not over centre); b) on-load/offload (load over centre); c) off load; d) freefall hydraulic; e) automatic.
- Standard61 pagesEnglish languagesale 15% off
- 10-Aug-2022
- 03.100.30
- 47.020.01
- ISO/TC 8/SC 1
This document specifies technical requirements for systems designed to detect a person who has gone overboard from a ship. This document does not cover man overboard (MOB) detection systems that require the passengers or crew to wear or carry a device to trigger an MOB event.
- Standard15 pagesEnglish languagesale 15% off
- Draft15 pagesEnglish languagesale 15% off
- 21-Jun-2020
- 47.020.01
- ISO/TC 8/SC 1
This document specifies general design principles for shipboard safety signs, fire control plan signs, markings and notices intended to communicate safety-related information to persons on board ships.
- Standard18 pagesEnglish languagesale 15% off
- 24-Mar-2020
- 47.020.01
- ISO/TC 8/SC 1
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.