Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate

ISO 8619:2003 specifies a method for the determination of the flow distance of powdered heat-setting phenolic resins for production and control. With reference to tablet formation, test temperature and angle of inclination of the glass plate, measurement of the flow distance involves arbitrarily defined conditions. The flow distance is dependent on the reactivity and melt viscosity of the resins. Rapid solidification and high melt viscosity shorten the flow distance.

Plastiques — Résines phénoliques en poudre — Détermination de la distance d'écoulement sur une plaque de verre chauffée

L'ISO 8619:2003 prescrit une méthode pour la détermination de la distance d'écoulement des résines phénoliques thermodurcissables en poudre pour le contrôle en fabrication et en réception. Ce mesurage de la distance d'écoulement implique des conditions définies arbitrairement, en particulier en ce qui concerne le pastillage, la température d'essai et l'inclinaison de la plaque de verre. La distance d'écoulement est influencée par la réactivité et par la viscosité de la résine fondue. Des vitesses de durcissement élevées et des viscosités à l'état fondu importantes réduisent la distance d'écoulement.

General Information

Status
Published
Publication Date
24-Apr-2003
Current Stage
9093 - International Standard confirmed
Completion Date
27-Sep-2023
Ref Project

Relations

Buy Standard

Standard
ISO 8619:2003 - Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8619:2003 - Plastiques -- Résines phénoliques en poudre -- Détermination de la distance d'écoulement sur une plaque de verre chauffée
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8619
Third edition
2003-04-01


Plastics — Phenolic resin powder —
Determination of flow distance on a
heated glass plate
Plastiques — Résines phénoliques en poudre — Détermination de la
distance d'écoulement sur une plaque de verre chauffée




Reference number
ISO 8619:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 8619:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO 8619:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Principle. 1
3 Apparatus. 1
4 Procedure. 1
5 Expression of results. 3
6 Precision. 3
7 Test report. 4

© ISO 2003 — All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8619:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8619 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 12, Thermosetting
materials.
This third edition cancels and replaces the second edition (ISO 8619:1995), which had been revised so that
the test device may also be tilted by opening the oven.
iv © ISO 2003 — All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL ST
...

NORME ISO
INTERNATIONALE 8619
Troisième édition
2003-04-01


Plastiques — Résines phénoliques en
poudre — Détermination de la distance
d'écoulement sur une plaque de verre
chauffée
Plastics — Phenolic resin powder — Determination of flow distance on
a heated glass plate




Numéro de référence
ISO 8619:2003(F)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 8619:2003(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2003
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2003 — Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8619:2003(F)
Sommaire Page
Avant-propos. iv
1 Domaine d'application. 1
2 Principe . 1
3 Appareillage. 1
4 Mode opératoire . 2
5 Expression des résultats. 3
6 Fidélité. 4
7 Rapport d’essai . 4

© ISO 2003 — Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 8619:2003(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.