ISO/TS 15311-1:2020
(Main)Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema
Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema
This document defines print quality metrics, measurement methods and reporting requirements for printed sheets that are suitable for all classes of printed products. Guidance as to which of these metrics to apply to any given product category along with acceptable conformance criteria is provided in subsequent parts of ISO/TS 15311. Although this document is expected to be used primarily to measure prints from digital printing systems, the metrics are general and can be applied to other kinds of print.
Technologie graphique — Exigences relatives aux imprimés destinés à la production commerciale et industrielle — Partie 1: Méthodes de mesure et schémas de rapport
Grafična tehnologija - Zahteve za tiskovine za komercialno in industrijsko proizvodnjo - 1. del: Metode merjenja in shema poročil
Ta dokument opredeljuje metrike kakovosti tiska, metode merjenja in zahteve za poročanje o natisnjenih listih, ki so primerni za vse skupine tiskanih izdelkov.
Navodila o tem, katere od teh metrik je treba uporabiti za posamezno kategorijo izdelkov, skupaj s sprejemljivimi merili skladnosti, so navedena v naslednjih delih standarda ISO/TS 15311.
Čeprav se pričakuje uporaba tega dokumenta predvsem za merjenje izpisov iz digitalnih tiskarskih sistemov, so metrike splošne in se lahko uporabljajo tudi za druge vrste izpisov.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS ISO/TS 15311-1:2023
01-april-2023
Nadomešča:
SIST-TS ISO/TS 15311-1:2020
Grafična tehnologija - Zahteve za tiskovine za komercialno in industrijsko
proizvodnjo - 1. del: Metode merjenja in shema poročil
Graphic technology - Requirements for printed matter for commercial and industrial
production - Part 1: Measurement methods and reporting schema
Technologie graphique — Exigences relatives aux imprimés destinés à la production
commerciale et industrielle — Partie 1: Méthodes de mesure et schémas de rapport
Ta slovenski standard je istoveten z: ISO/TS 15311-1:2020
ICS:
37.100.01 Grafična tehnologija na Graphic technology in
splošno general
SIST-TS ISO/TS 15311-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS ISO/TS 15311-1:2023
---------------------- Page: 2 ----------------------
SIST-TS ISO/TS 15311-1:2023
TECHNICAL ISO/TS
SPECIFICATION 15311-1
Third edition
2020-12
Graphic technology — Requirements
for printed matter for commercial and
industrial production —
Part 1:
Measurement methods and reporting
schema
Technologie graphique — Exigences relatives aux imprimés destinés à
la production commerciale et industrielle —
Partie 1: Méthodes de mesure et schémas de rapport
Reference number
ISO/TS 15311-1:2020(E)
©
ISO 2020
---------------------- Page: 3 ----------------------
SIST-TS ISO/TS 15311-1:2023
ISO/TS 15311-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST-TS ISO/TS 15311-1:2023
ISO/TS 15311-1:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 General . 4
4.2 Single or multiple sheet assessment . 4
4.2.1 General. 4
4.2.2 Total number of sheets . 4
4.2.3 Number of sheets measured . 4
4.2.4 Reporting . 5
4.3 Print quality measures .
...
TECHNICAL ISO/TS
SPECIFICATION 15311-1
Third edition
2020-12
Graphic technology — Requirements
for printed matter for commercial and
industrial production —
Part 1:
Measurement methods and reporting
schema
Technologie graphique — Exigences relatives aux imprimés destinés à
la production commerciale et industrielle —
Partie 1: Méthodes de mesure et schémas de rapport
Reference number
ISO/TS 15311-1:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 15311-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 15311-1:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 General . 4
4.2 Single or multiple sheet assessment . 4
4.2.1 General. 4
4.2.2 Total number of sheets . 4
4.2.3 Number of sheets measured . 4
4.2.4 Reporting . 5
4.3 Print quality measures . 6
4.3.1 Overview . 6
4.3.2 Colour, tone reproduction and gloss . 6
4.3.3 Uniformity .14
4.3.4 Detail rendition capabilities .17
4.3.5 Permanence . .22
4.3.6 Artefacts .
...
TECHNICAL ISO/TS
SPECIFICATION 15311-1
Third edition
Graphic technology — Requirements
for printed matter for commercial and
industrial production —
Part 1:
Measurement methods and reporting
schema
Technologie graphique — Exigences relatives aux imprimés destinés à
la production commerciale et industrielle —
Partie 1: Méthodes de mesure et schémas de rapport
PROOF/ÉPREUVE
Reference number
ISO/TS 15311-1:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 15311-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 15311-1:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 General . 4
4.2 Single or multiple sheet assessment . 4
4.2.1 General. 4
4.2.2 Total number of sheets . 4
4.2.3 Number of sheets measured . 4
4.2.4 Reporting . 5
4.3 Print quality measures . 6
4.3.1 Overview . 6
4.3.2 Colour, tone reproduction and gloss . 6
4.3.3 Uniformity .14
4.3.4 Detail rendition capabilities .17
4.3.5 Permanence . .21
4.3.6 Artefacts .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.