ISO 11752:2000/Amd 1:2006

INTERNATIONAL ISO
STANDARD 11752
First edition
2000-10-15
AMENDMENT 1
2006-09-15


Flexible cellular polymeric materials —
Moulded and extruded sponge or
expanded cellular rubber products —
Compressibility test on finished parts
AMENDMENT 1
Matériaux polymères alvéolaires souples — Produits en caoutchouc
alvéolaire expansé ou spongieux, moulés et extrudés — Essai de
compressibilité sur des produits finis
AMENDEMENT 1




Reference number
ISO 11752:2000/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 11752:2000/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11752:2000/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations,
...