ISO 2106:1982/Amd 1:1983
(Amendment)Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method - Amendment 1
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method - Amendment 1
Page 1, clause 2, replace the 3rd paragraph by: "Conversely, if the conditions of application of the layer and its density are known, the determination of the mass per unit area (surface density) can permit a calculation of the average mass and an approximate evaluation of the thickness (see clause 9, note, 3rd paragraph)." Clause 5, 1st line: replace "phosphochromic solution" by "phosporic-chromic acid". Page 2, clause 9, note: insert the following after the 2nd paragraph: "Because of uncertainty about the density value, the method only gives an approximate value of the thickness."
Anodisation de l'aluminium et de ses alliages — Détermination de la masse par unité de surface (masse surfacique) des couches anodiques — Méthode gravimétrique — Amendement 1
General Information
Relations
Frequently Asked Questions
ISO 2106:1982/Amd 1:1983 is a standard published by the International Organization for Standardization (ISO). Its full title is "Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method - Amendment 1". This standard covers: Page 1, clause 2, replace the 3rd paragraph by: "Conversely, if the conditions of application of the layer and its density are known, the determination of the mass per unit area (surface density) can permit a calculation of the average mass and an approximate evaluation of the thickness (see clause 9, note, 3rd paragraph)." Clause 5, 1st line: replace "phosphochromic solution" by "phosporic-chromic acid". Page 2, clause 9, note: insert the following after the 2nd paragraph: "Because of uncertainty about the density value, the method only gives an approximate value of the thickness."
Page 1, clause 2, replace the 3rd paragraph by: "Conversely, if the conditions of application of the layer and its density are known, the determination of the mass per unit area (surface density) can permit a calculation of the average mass and an approximate evaluation of the thickness (see clause 9, note, 3rd paragraph)." Clause 5, 1st line: replace "phosphochromic solution" by "phosporic-chromic acid". Page 2, clause 9, note: insert the following after the 2nd paragraph: "Because of uncertainty about the density value, the method only gives an approximate value of the thickness."
ISO 2106:1982/Amd 1:1983 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 2106:1982/Amd 1:1983 has the following relationships with other standards: It is inter standard links to ISO 2106:1982, ISO 2106:2011; is excused to ISO 2106:1982. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 2106:1982/Amd 1:1983 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL STANDARD ISO 2106~1982/AMENDMENT 1
Published 1983-09-15
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION.MEX~YHAPO~HAR OPTAHM3AUMR i-l0 CTAHC1APTM3AUMM@ORGANISATION INTERNATIONALE DE NORMALISATION
Anodizing of aluminium and its alloys - Determination of
mass per unit area (surface density) of anodic Oxide
coatings - Gravimetric method
AMENDMENT 1
Amendment 1 to International Standard ISO 2106-1982 was developed by Technical Committee ISO/TC 79, Light metals and
their aloys. It was submitted directly to the ISO Council, in accordance with clause 6.11.2, part 1 of the Directives for the technical
work of ISO.
Page 7
Clause 2
Replace the 3rd Paragraph by the following :
“Conversely, if the conditions of application of the layer and its density are known, the determination of the mass per unit area
(surface density) tan permit a cal
...
NORME INTERNATIONALE ISO 21064982/AMENDEMENT 1
Publié 1983-09-15
INTERNATIONAL ORGANIZATION FOR S~ANDARDIZATlON.MEX~YHAPO~HAR OPTAHM3AlJMI Il0 CTAH~APTM3AIWM~ORGANISATION INTERNATIONALE DE NORMALISATION
Anodisation de l’aluminium et de ses alliages -
Détermination de la masse par unité de surface (masse
surfacique) des couches anodiques - Méthode
gravimétrique
AMENDEMENT 1
L’Amendement 1 à la Norme internationale ISO 2106-1982 a été élaboré par le comité technique ISO/TC 79, M&aux légers et leurs
&Gges. II fut soumis directement au Conseil de I’ISO, conformément au paragraphe 6.11.2, partie 1 des Directives pour les travaux
techniques de I’ISO.
Page 7
Chapitre 2
Remplacer le 3e alinéa par le suivant :
«Inversement, si les conditions d’application de la couche et sa masse volumique sont connues, la détermination de
...
NORME INTERNATIONALE ISO 21064982/AMENDEMENT 1
Publié 1983-09-15
INTERNATIONAL ORGANIZATION FOR S~ANDARDIZATlON.MEX~YHAPO~HAR OPTAHM3AlJMI Il0 CTAH~APTM3AIWM~ORGANISATION INTERNATIONALE DE NORMALISATION
Anodisation de l’aluminium et de ses alliages -
Détermination de la masse par unité de surface (masse
surfacique) des couches anodiques - Méthode
gravimétrique
AMENDEMENT 1
L’Amendement 1 à la Norme internationale ISO 2106-1982 a été élaboré par le comité technique ISO/TC 79, M&aux légers et leurs
&Gges. II fut soumis directement au Conseil de I’ISO, conformément au paragraphe 6.11.2, partie 1 des Directives pour les travaux
techniques de I’ISO.
Page 7
Chapitre 2
Remplacer le 3e alinéa par le suivant :
«Inversement, si les conditions d’application de la couche et sa masse volumique sont connues, la détermination de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...