ISO 16087:2013
(Main)Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
ISO 16087:2013 provides requirements for the clinical assessment of migration of orthopaedic implants with roentgen stereophotogrammetric analysis (RSA).
Implants chirurgicaux — Analyse stéréophotogrammétrique Roentgen pour l'évaluation de la migration des implants orthopédiques
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 16087
First edition
2013-10-01
Implants for surgery — Roentgen
stereophotogrammetric analysis
for the assessment of migration of
orthopaedic implants
Implants chirurgicaux — Analyse stéréophotogrammétrique
Roentgen pour l’évaluation de la migration des implants
orthopédiques
Reference number
ISO 16087:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO 16087:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 16087:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms and definitions . 1
3 Measurement . 3
3.1 Size of markers . 3
3.2 Virtual markers . 3
3.3 Number and distribution of markers . 4
3.4 Mean error of rigid body fitting . 4
3.5 Condition number . 4
3.6 Three-dimensional implant models . 4
4 Radiographic arrangement . 4
5 Calibration cages and reference plates . 4
6 Radiographs . 5
6.1 General . 5
6.2 Double examinations . 5
7 Software . 5
8 Coordinate systems . 5
8.1 Global coordinate system .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.