ISO 4195:2007/Cor 1:2008
(Corrigendum)Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods - Technical Corrigendum 1
Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods - Technical Corrigendum 1
This International Standard specifies requirements and test methods for the relative level of heat resistance of conveyor belt covers made of rubber. It gives the permissible variations of hardness, elongation at break and tensile strength after exposure to heat. It is applicable only to those conveyor belts having a cover thickness greater than or equal to 4 mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1[1].
Courroies transporteuses avec revêtements caoutchouc résistant à la chaleur — Résistance à la chaleur des revêtements — Exigences et méthodes d'essai — Rectificatif technique 1
Naprave za kontinuirni transport - Trakovi tračnih transporterjev s toplotno odporno gumijasto prevleko - Toplotna odpornost prevleke - Zahteve in preskusne metode - Popravek
Ta mednarodni standard določa zahteve in preskusne metode za relativno raven toplotne odpornosti gumijastih prevlek trakov tračnih transporterjev. Standard določa dovoljene razlike v trdoti, raztezku pri zlomu in natezni trdnosti po izpostavljenosti toploti. Uporablja se samo za trake tračnih transporterjev z debelino prevleke najmanj 4 mm. Standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda ISO 21183-1[1].
General Information
Relations
Frequently Asked Questions
ISO 4195:2007/Cor 1:2008 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods - Technical Corrigendum 1". This standard covers: This International Standard specifies requirements and test methods for the relative level of heat resistance of conveyor belt covers made of rubber. It gives the permissible variations of hardness, elongation at break and tensile strength after exposure to heat. It is applicable only to those conveyor belts having a cover thickness greater than or equal to 4 mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1[1].
This International Standard specifies requirements and test methods for the relative level of heat resistance of conveyor belt covers made of rubber. It gives the permissible variations of hardness, elongation at break and tensile strength after exposure to heat. It is applicable only to those conveyor belts having a cover thickness greater than or equal to 4 mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1[1].
ISO 4195:2007/Cor 1:2008 is classified under the following ICS (International Classification for Standards) categories: 53.040.20 - Components for conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 4195:2007/Cor 1:2008 has the following relationships with other standards: It is inter standard links to ISO 4195:2007, ISO 4195:2012; is excused to ISO 4195:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 4195:2007/Cor 1:2008 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Courroies transporteuses avec revêtements caoutchouc résistant à la chaleur - Résistance à la chaleur des revêtements - Exigences et méthodes d'essaiConveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods - Corrigendum53.040.20Deli za transporterjeComponents for conveyorsICS:Ta slovenski standard je istoveten z:ISO 4195:2007/Cor 1:2008SIST ISO 4195:2012/Cor 1:2012fr01-oktober-2012SIST ISO 4195:2012/Cor 1:2012SLOVENSKI
STANDARD
ICS
53.040.20 Réf. no ISO 4195:2007/Cor.1:2008(F)© ISO 2008 – Tous droits réservés Publié en Suisse
NORME INTERNATIONALE ISO 4195:2007 RECTIFICATIF TECHNIQUE 1 Publié
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...