iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 5800:1987/Cor 1:2001

(Corrigendum)

Photography - Colour negative films for still photography - Determination of ISO speed - Technical Corrigendum 1

Photography - Colour negative films for still photography - Determination of ISO speed - Technical Corrigendum 1

The colour negatives obtained with these films are assumed to be primarily used for making reflection-type colour prints but may also be used to make colour transparencies. The specifications do not apply to colour negative films for motion-picture and aerial photography.

Photographie — Films négatifs couleur pour prise de vue — Détermination de la sensibilité ISO — Rectificatif technique 1

Fotografija - Barvni negativni filmi za mirujoče fotografije - Določanje splošne občutljivosti ISO - Tehnični popravek 1

Za barvne negative, pridobljene s temi filmi, se predpostavlja, da se uporabljajo predvsem za izdelavo refleksijskih barvnih natisov, lahko pa se uporabljajo tudi za izdelavo barvnih prosojnic. Specifikacije ne veljajo za barvne negativne filme za premično in zračno fotografijo.

General Information

Status
Published
Publication Date
13-Jun-2001
ICS
37.040.20 - Photographic paper, films and plates. Cartridges
Technical Committee
ISO/TC 42 - Photography
Drafting Committee
ISO/TC 42/WG 3 - Image measurement, viewing and sensitometry
Current Stage
6060 - International Standard published
Start Date
14-Jun-2001
Completion Date
13-Dec-2025
Ref Project
SIST ISO 5800:2011/Cor 1:2011 - Photography - Colour negative films for still photography - Determination of ISO speed - TECHNICAL CORRIGENDUM 1

Relations

Corrects
ISO 5800:1987 - Photography - Colour negative films for still photography - Determination of ISO speed
Effective Date
06-Jun-2022
Child
ISO 5800:1987 - Photography - Colour negative films for still photography - Determination of ISO speed
Effective Date
15-Apr-2008
ISO 5800:2011/Cor 1:2011ISO 5800:2011/Cor 1:2011
PreviousNext
Corrigendum
ISO 5800:2011/Cor 1:2011
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

ISO 5800:1987/Cor 1:2001 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Photography - Colour negative films for still photography - Determination of ISO speed - Technical Corrigendum 1". This standard covers: The colour negatives obtained with these films are assumed to be primarily used for making reflection-type colour prints but may also be used to make colour transparencies. The specifications do not apply to colour negative films for motion-picture and aerial photography.

The colour negatives obtained with these films are assumed to be primarily used for making reflection-type colour prints but may also be used to make colour transparencies. The specifications do not apply to colour negative films for motion-picture and aerial photography.

ISO 5800:1987/Cor 1:2001 is classified under the following ICS (International Classification for Standards) categories: 37.040.20 - Photographic paper, films and plates. Cartridges. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 5800:1987/Cor 1:2001 has the following relationships with other standards: It is inter standard links to ISO 5800:1987; is excused to ISO 5800:1987. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 5800:1987/Cor 1:2001 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Photographie - Films négatifs couleur pour prise de vue - Détermination de la sensibilité ISO - RECTIFICATIF TECHNIQUE 1Photography - Colour negative films for still photography - Determination of ISO speed - TECHNICAL CORRIGENDUM 137.040.20]YLWNLPhotographic paper, films and cartridgesICS:Ta slovenski standard je istoveten z:ISO 5800:1987/Cor 1:2001SIST ISO 5800:2011/Cor 1:2011en,fr01-julij-2011SIST ISO 5800:2011/Cor 1:2011SLOVENSKI
STANDARD
ICS37.040.20Ref.No.ISO5800:1987/Cor.1:2001(E)©ISO2001–AllrightsreservedPrintedinSwitzerlandINTERNATIONALSTANDARDISO5800:1987TECHNICALCORRIGE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 1008:2025(Main)
Photography - Unprocessed photographic papers - Sheet dimensions

This document specifies the nominal sizes and aim dimensions, with their cutting tolerances, of black-and-white and colour silver halide containing photographic papers in sheets for pictorial use. It also specifies a method for checking the squareness of the sheets and straightness of their edges and establishes a rule for package marking. The term "pictorial" means the use in the production of photographic prints and therefore excludes products for graphic arts. In International Standards, metric units are prime. However, some older inch sizes are included to add historic context.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/PAS 18940-1:2025(Main)
Imaging materials - Image permanence specification of reflection photographic prints for indoor applications - Part 1: Test methods

This document specifies the test methods, test conditions, test target design, and analysis procedures for the evaluation of the image permanence performance of photographic reflection prints. Tests based on ISO 18936, ISO 18937 (all parts), ISO 18941, and ISO 18946 characterize the thermal stability, the light stability, the ozone stability, and the humidity stability of photographic prints, respectively. This document is applicable to any photographic reflection print produced through a digital step in the workflow. It includes prints created by chromogenic silver halide, inkjet, electrophotography, thermal diffusion, and other technologies. With reference to monochrome prints, this document is relevant to photographic prints where the print material contains colorants. This document is not relevant to monochrome silver halide prints, often known as black and white prints. The document specifies the content and procedure for graphical reporting of test results as a first level data collection for basic technical communication of image permanence performance of photographic prints. This document does not include application-specific end-points, environmental conditions during preservation and display of photographic prints, and test doses (durations, intensity).

  • Technical specification
    14 pages
    English language
    sale 15% off
ISO
ISO 18916:2025(Main)
Imaging materials - Photographic activity test for enclosure materials - Processed silver‐gelatin and dye‐gelatin prints

This document specifies the test method for evaluating possible chemical interactions between enclosures and photographic materials that are produced in a light sensitive silver halide and gelatin containing layer, processed using wet chemistry and where the final image retains metallic silver, herein referred to as silver-gelatin materials. Modified versions of the test method are applicable to chromogenic (dye coupler) and diazo photographic materials (see Annex A). This document is applicable to all general photographic enclosure materials used for storage, display, and transport, such as paper, tissue, cardboard, mat board and plastics. It is also applicable to components of photographic enclosure materials such as adhesives and marking substances, including inks, paints, labels, and tape. This document applies to all storage, display, and transport materials used for silver-gelatin photographs whether intended for short or long-term use (see Annex E). This document does not apply to non-silver-gelatin imaging systems. It does not pertain to harmful physical interactions such as blocking (sticking together), dye bleed, adhesive migration, or plasticizer exudation. It does not pertain to important criteria of enclosures such as their inherent chemical stability, physical integrity, and workmanship. Passing the photographic activity test (PAT) alone does not indicate that a material is archival. Quality requirements for photo-safe storage enclosures and their components are covered in ISO 18902, which includes passing the criteria of the PAT.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 18946:2023(Main)
Imaging materials - Reflection colour photographic prints - Method for testing humidity fastness

This document describes test methods for evaluating reflection colour photographic prints with regard to changes in image appearance resulting from exposure to high relative humidity. NOTE Testing under low humidity conditions is described in ISO 18949. The observed changes relate to colour, tone and loss of sharpness caused by horizontal and vertical diffusion of colorants from exposure to elevated humidity levels. Other humidity-related factors, such as mould and mildew growth, and physical damage, such as curl, cockle, cracking or delamination due to humidity cycling, are outside the scope of this test method. Although the method and procedures described in this document can be used to test any colour hardcopy technology, it is particularly appropriate to systems where the colorants are applied by a mechanism involving the diffusion of colorant into image-receiving layers (for example inkjet or dye diffusion processes) or applied onto uncoated fibrous materials such as paper.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO/PAS 18940-1:2023(Main)
Imaging materials - Image permanence specification of reflection photographic prints for indoor applications - Part 1: Test methods

This document specifies the test methods, the test conditions, the test target design, and the analysis procedures for the evaluation of the image permanence performance of digital photographic reflection prints. Tests based on ISO 18936, ISO 18937 (all parts), ISO 18941, and ISO 18946 characterize the thermal stability, the light stability, the ozone stability, and the humidity stability of photographic prints. This document is applicable to any digital photographic reflection print, which includes prints created by chromogenic silver halide, inkjet, electrophotography, thermal diffusion, and others. Black and white prints composed of metallic silver are not within the scope, but monochrome prints where the printing process contains dyes are within the scope. The document specifies the content and procedure for graphical reporting of test results as a first level data collection for basic technical communication of image permanence performance of photographic prints. Application-specific end-points, environmental conditions and test doses (durations, intensity) are not included in this document.

  • Technical specification
    12 pages
    English language
    sale 15% off
ISO
ISO 18937-1:2023(Main)
Imaging materials - Methods for measuring indoor light stability of photographic prints - Part 1: General guidance and requirements

This document provides information and general guidance about the methods for measuring the indoor light stability of reflection prints, both colour and monochrome, transparent or translucent films, and photographic prints for backlit displays. This document is relevant to the selection and operation of the methods of exposure to radiation and environmental stress factors described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing printed material to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated lightfastness devices. NOTE In this document, the term “light source” refers to radiation sources that emit UV radiation, visible radiation, infrared radiation, or any combination of these types of radiation. This document does not include test procedures for determining the effects of light exposure on the physical stability of images, supports, or binder materials. However, it is recognized that in some instances, physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than the stability of the image itself, determines the useful life of a print material. Print image stability results determined for one printer model, software settings, colorant, and media combination may not be applicable to another combination.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 18937-2:2023(Main)
Imaging materials - Methods for measuring indoor light stability of photographic prints - Part 2: Xenon‐arc lamp exposure

This document describes test equipment and procedures for measuring the light stability of photographic prints when subjected to a filtered xenon-arc light source at specified levels of illuminance (irradiance), temperature and relative humidity. It is applicable to both colour and monochrome reflection prints, transparent films, or translucent films. It is also applicable to photographic prints in general, photobooks, or prints for backlit displays. General indoor display conditions described herein are intended to simulate common use conditions found in houses, apartments and other dwelling places where indirect lighting due to filtering (through window glass) and shading is often the principal illumination causing displayed photographs to fade. Simulated in-window display conditions are intended to simulate terrestrial daylight transmitted through standard architectural window glass (double glazing). A typical example of such display can be found when images are displayed in store windows, facing toward the outdoors, so that they can be viewed by people outside of the store[5][6]. NOTE It is recognized that in some instances, physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than the stability of the image itself, will determine the useful life of a print material. General guidance is given in ISO 18937-1.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO/TS 20791-3:2023(Main)
Photography - Photographic reflection prints - Part 3: Evaluation of glossiness

This document describes the characterization of glossiness of photographic reflection prints, which consists of specular gloss measurement and image clarity measurement. This document is applicable to any photographic printing technology such as inkjet, thermal dye transfer, electrophotography and silver halide technologies. NOTE The level of preferred glossiness depends on the application.

  • Technical specification
    11 pages
    English language
    sale 15% off
ISO
ISO/TS 21139-22:2023(Main)
Permanence and durability of commercial prints - Part 22: Backlit display in indoor or shaded outdoor conditions - Light stability

This document describes the test methods for light stability measurements of prints on transparent or translucent foils, sheets and paper or printed on a textile, which are displayed on backlit units installed in indoor or in shaded outdoor conditions, which are protected against direct precipitation and radiative heating. Installations of backlit display units in outdoor areas without shading, which are exposed to direct weathering and/or radiative heating, are excluded. This document is applicable to the various product classes of “commercial prints” that are suitable for backlit display. These commercial prints often contain combinations of text, pictorial images and/or artwork. This document provides guidelines for colour measurements, data analysis and also provides guidance for translation of test results into suitable image permanence performance claims considering the variability of backlit designs and environmental conditions. This document is applicable to both analogue and digitally printed matter. Methods and principles apply to both, colour, and monochrome prints.

  • Technical specification
    27 pages
    English language
    sale 15% off
ISO
ISO 18951-1:2022(Main)
Imaging materials - Scratch resistance of photographic prints - Part 1: General test method

This document specifies test method, test target, and reporting requirements to determine the scratch resistance of prints with photographic images. Photographic images can be produced by a wide range of printing technologies, including silver halide, electrophotography, inkjet, dye diffusion thermal transfer, commonly known as dye sublimation, and dye transfer processes. This document is applicable to prints with paper substrate and other type of substrates including prints on plastic, glass, metal and other materials. This document is applicable to photographic prints that have no protection as well as photographic prints that are protected by a coating or lamination. It is not the purpose of this document to define limits of acceptability or failure. They would be determined by the user and the intended application.

  • Standard
    12 pages
    English language
    sale 15% off