ISO 16425:2024
(Main)Ships and marine technology — Specifications for the installation of ship communication networks for shipboard equipment and systems
Ships and marine technology — Specifications for the installation of ship communication networks for shipboard equipment and systems
This document provides installation specifications for ship communication networks, so as to improve communication between shipboard equipment and within shipboard systems that are independent from navigational equipment networks and engine-control networks. This document can also be applied to operational technology (OT) networks that use software and hardware to control and monitor devices and infrastructure such as navigational equipment networks and machinery control networks in ship. The ship communication networks covered in this document are intended for information sharing and are not directly related to safety of navigation. This document utilizes existing standards relating to protocols, and provides new specifications for aspects such as communication network-system architecture, administration, operation and installation. The new specifications in this document include: redundancy, if necessary, for a shipboard communication network system; a network administration that does not require experts; physical as well as logical security; and network installation. This document uses the standard communication network Internet protocol. This document applies to shipboard wired networks for IP communication, using Fast Ethernet and Gigabit Ethernet as specified in IEEE 802.3 and to shipboard wireless networks for IP communication, using the unlicensed 2,4 GHz and 5 GHz bands as specified in IEEE 802.11. NOTE Other wireless technologies based on non-IP communication such as IEEE 802.15.1, IEEE 802.15.4 or wireless communication methods using 920 MHz band are not covered in this document.
Navires et technologie maritime — Spécifications pour l'installation de réseaux de communication des navires pour les équipements et systèmes embarqués
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16425
ISO/TC 8/SC 6
Ships and marine technology —
Secretariat: JISC
Specifications for the installation of
Voting begins on:
2023-10-25 ship communication networks for
shipboard equipment and systems
Voting terminates on:
2023-12-20
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 16425:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 16425:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16425
ISO/TC 8/SC 6
Ships and marine technology —
Secretariat: JISC
Specifications for the installation of
Voting begins on:
ship communication networks for
shipboard equipment and systems
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 16425:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 16425:2023(E)
Contents Page
Foreword . vi
Introduction .viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 6
5 Network system architecture .7
5.1 Scope of networks system architecture . 7
5.2 Controlled network requirements . 9
5.3 Network system design . 9
5.3.1 General . 9
5.3.2 Network system separation . 10
5.3.3 Network division .
...
ISO/FDIS 16425:2023(E) Style Definition: Heading 1: Indent: Left: 0 cm, First
line: 0 cm, Tab stops: Not at 0.76 cm
Date: 2023-06-1610-10
Style Definition: Heading 2: Font: Bold, Tab stops: Not
at 0.63 cm
ISO TC 8/SC 6/WG 16
Style Definition: Heading 3: Font: Bold
Secretariat: JISC/JSTRA
Style Definition: Heading 4: Font: Bold
Style Definition: Heading 5: Font: Bold
Ships and marine technology — Specifications for the installation of ship communication
Style Definition: Heading 6: Font: Bold
networks for shipboard equipment and systems
Style Definition: ANNEX
Style Definition: AMEND Terms Heading: Font: Bold
Style Definition: AMEND Heading 1 Unnumbered:
Font: Bold
Style Definition: IneraTableMultiPar: Font color: Black,
Adjust space between Latin and Asian text, Adjust space
between Asian text and numbers
---------------------- Page: 1 ----------------------
ISO/FDIS 16425:2023(E)
© ISO 2023
Formatted: None, Indent: Left: 0.5 cm, Right: 0.5 cm,
Space Before: 0 pt, No page break before
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
Formatted: Default Paragraph Font
part of this publication may be reproduced or utilized otherwise in any form or by any means,
Formatted: Default Paragraph Font
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
Formatted: Indent: Left: 0.5 cm, Right: 0.5 cm
ISO’sISO's member body in the country of the requester.
ISO copyright officeCopyright Office
Formatted: Indent: Left: 0.5 cm, First line: 0 cm, Right:
0.5 cm
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Formatted: Indent: Left: 0.5 cm, First line: 0 cm, Right:
0.5 cm
Phone: + 41 22 749 01 11
Email: copyright@iso.org
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Formatted: Indent: Left: 0.5 cm, First line: 0 cm, Right:
0.5 cm
Published in Switzerland.
Formatted: Indent: Left: 0.5 cm, Right: 0.5 cm
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 16425:2023(E)
Formatted: zzContents, Space After: 0 pt, Line spacing:
Contents
single, No page break before, Don't keep with next,
Hyphenate, Don't adjust space between Latin and Asian
Foreword . 12 text, Don't adjust space between Asian text and
numbers, Tab stops: Not at 0.71 cm
Introduction . 14
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 7
5 Network system architecture . 8
5.1 Scope of networks system architecture. 8
5.2 Controlled network requirements . 10
5.3 Network system design . 11
5.3.1 General . 11
5.3.2 Network system separation . 12
5.3.3 Network division. 12
5.3.4 Traffic division . 13
5.3.5 Redundancy . 13
5.3.6 Cyber security . 13
5.4 Roles and management .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.