iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 2400:1972

(Main)

Welds in steel — Reference block for the calibration of equipment for ultrasonic examination

Welds in steel — Reference block for the calibration of equipment for ultrasonic examination

Establishes material and dimensions of the reference block. The tolerances on all dimensions are 0,1 mm.

Soudures sur acier — Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasons

General Information

Status
Withdrawn
Publication Date
31-May-1972
Withdrawal Date
31-May-1972
ICS
25.160.40 - Welded joints and welds
Technical Committee
ISO/TC 135/SC 3 - Ultrasonic testing
Drafting Committee
ISO/TC 135/SC 3 - Ultrasonic testing
Current Stage
9599 - Withdrawal of International Standard
Completion Date
17-Sep-2012
Ref Project

Relations

Revised
ISO 2400:2012 - Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
Effective Date
17-Jul-2010

Buy Standard

ISO 2400:1972 - Welds in steel -- Reference block for the calibration of equipment for ultrasonic examinationISO 2400:1972 - Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination
PreviousNext
Standard
ISO 2400:1972 - Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasonsISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasons
PreviousNext
Standard
ISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasons
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasonsISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasons
PreviousNext
Standard
ISO 2400:1972 - Soudures sur acier -- Bloc de référence pour l'étalonnage des appareils pour l'examen par ultrasons
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

~~
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEX,!lYHAI’OilHAR OI’I‘AHM3AUM5l fl0 CTAHLlAPTM3AUMM l 0RGANISATION INTERNATIONALE DE NORMALISATION
Welds in steel - Reference block for the calibration of
equipment for ultrasonic examination
First edition - 1972-06-15
UDC 621.79.056 : 669.14 : 620.179.16 Ref. No. IS0 2400-1972 (E)
Descriptors : welded joints, nondestructive tests, ultrasonic tests, calibrating, blocks.
Price based on 1 page

---------------------- Page: 1 ----------------------
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee, International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2400 was drawn up by Technical Committee
lSO/TC 44, Welding.
It was approved in November 1971 by the Member Bodies of the following
countries :
Austria India South Africa, Rep. of
Belgium Ireland Spain
Canada Israel Swede
...

ME INTERNATIONALE
STANDARDIZATION l MEXflYHAl’OflHAJl OPI-AHM3AUM5l Il0 CTAHAAPTM3AUMM -ORGANISATION INTERNATIONALE DE NORMALISATION
INTERNATIONAL ORGANIZATION FOR
- Bloc de référence pour l’étalonnage
Soudures sur acier
des appareils pour l’examen par ultra-sons
Brernière édition - 1972-06-15
Réf. No : ISO 2400-1972 (F)
CDU 621.79.056 : 669.14 : 620.179.16
Descripteurs : joint soudé, essai non destructif, essai par ultrasons, étalonnage, bloc.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres 60). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 2499 a été établie par le Comité Technique
ISOKC 44, Soudure.
Elle fut approuvée en novembre 1971 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ France Roumanie
Allemagne Inde Royaume-Uni
Autri
...

ME INTERNATIONALE
STANDARDIZATION l MEXflYHAl’OflHAJl OPI-AHM3AUM5l Il0 CTAHAAPTM3AUMM -ORGANISATION INTERNATIONALE DE NORMALISATION
INTERNATIONAL ORGANIZATION FOR
- Bloc de référence pour l’étalonnage
Soudures sur acier
des appareils pour l’examen par ultra-sons
Brernière édition - 1972-06-15
Réf. No : ISO 2400-1972 (F)
CDU 621.79.056 : 669.14 : 620.179.16
Descripteurs : joint soudé, essai non destructif, essai par ultrasons, étalonnage, bloc.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres 60). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 2499 a été établie par le Comité Technique
ISOKC 44, Soudure.
Elle fut approuvée en novembre 1971 par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ France Roumanie
Allemagne Inde Royaume-Uni
Autri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 7963:2022(Main)
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2

This document specifies the requirements for the dimensions, material, manufacture and methods of use for calibration block No. 2 for setting and checking ultrasonic test equipment.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 2400:2012(Main)
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1

This International Standard specifies requirements for the dimensions, material and manufacture of a steel block for calibrating ultrasonic test equipment used in manual testing.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 5817:2023(Main)
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections

This document specifies quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles can also be applied to partial-penetration butt welds. Quality levels for beam-welded joints in steel are presented in ISO 13919-1. Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. Several types of loads are considered, e.g. static load, thermal load, corrosion load, pressure load. Additional guidance on fatigue loads is given in Annex B. The quality levels refer to production and good workmanship. This document is applicable to: a) non-alloy and alloy steels; b) nickel and nickel alloys; c) titanium and titanium alloys; d) manual, mechanized and automatic welding; e) all welding positions; f) all types of welds, e.g. butt welds, fillet welds and branch connections; g) the following welding processes and their sub-processes, as defined in ISO 4063: — 11 metal arc welding without gas protection; — 12 submerged arc welding; — 13 gas-shielded metal arc welding; — 14 gas-shielded arc welding with non-consumable tungsten electrode; — 15 plasma arc welding; — 31 oxyfuel gas welding (for steel only). Metallurgical aspects, such as grain size and hardness, are not covered by this document.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 5173:2023(Main)
Destructive tests on welds in metallic materials — Bend tests

This document specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to reveal imperfections on or near the surface of the test specimen which is under tension during bend testing and/or assess ductility. It also gives the dimensions of the test specimen. In addition, this document specifies methods to be used instead of transverse bend tests with a former for welded joints when base materials, heat affected zones and/or weld metal have a significant difference in their physical and mechanical properties in relation to bending. This document applies to metallic materials in all forms of product with welded joints made by any welding process.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO 10447:2022(Main)
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds

This document specifies the procedures and recommended tooling to be used for peel and chisel testing of resistance spot and embossed projection welds. This document applies to welds made in two or more sheets in the thickness range of 0,5 mm to 3,0 mm. The aim of these tests is to determine: — weld size and failure mode when welds are destructively tested; — verification of welds by non-destructive chisel tests. NOTE The preferred method of peel testing seam welds (mechanized peel testing) is covered in ISO 14270.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO 7963:2022(Main)
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2

This document specifies the requirements for the dimensions, material, manufacture and methods of use for calibration block No. 2 for setting and checking ultrasonic test equipment.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 17636-2:2022(Main)
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors

This document specifies techniques of digital radiography with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject. This document applies to the digital radiographic testing of fusion welded joints in metallic materials. It applies to the joints of plates and pipes. Besides its conventional meaning, “pipe”, as used in this document, covers other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels. This document specifies the requirements for digital radiographic X- and gamma-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDAs) of the welded joints of metallic plates and tubes for the detection of imperfections. It includes manual and automated inspection with DDAs. Digital detectors provide a digital grey value image which can be viewed and evaluated using a computer (Annex E). This document specifies the recommended procedure for detector selection and radiographic practice. Selection of computer, software, monitor, printer and viewing conditions are important, but are not the main focus of this document. The procedure specified in this document provides the minimum requirements for radiographic practice which permits exposure and acquisition of digital radiographs with equivalent sensitivity for the detection of imperfections as film radiography (specified in ISO 17636-1). This document does not specify acceptance levels for any of the indications found on the digital radiographs. ISO 10675 provides information on acceptance levels for weld inspection. If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

  • Standard
    64 pages
    English language
    sale 15% off
  • Standard
    64 pages
    French language
    sale 15% off
ISO
ISO 17636-1:2022(Main)
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film

This document specifies techniques of radiographic testing of fusion-welded joints in metallic materials using industrial radiographic film techniques with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject. It applies to the joints of plates and pipes in metallic materials. Besides its conventional meaning, “pipe” as used in this document covers other cylindrical bodies, such as tubes, penstocks, boiler drums and pressure vessels. This document does not specify acceptance levels for any of the indications found on the radiographs. The ISO 10675 series provides information on acceptance levels for weld evaluation. If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    38 pages
    French language
    sale 15% off
ISO
ISO 4136:2022(Main)
Destructive tests on welds in metallic materials — Transverse tensile test

This document specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint. This document applies to metallic materials in all forms of product with joints made by any welded butt joint.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
ISO
ISO 9016:2022(Main)
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination

This document specifies the method to be used when describing test specimen location and notch orientation for the testing and reporting of impact tests on welded butt joints. This document applies to impact tests on metallic materials in all forms of product made by any fusion and pressure welding process. It is used in addition to the ISO 148 series and includes test specimen denomination and additional reporting requirements.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off