ISO 11565:2006/Cor 1:2007
(Corrigendum)Road vehicles — Spark-plugs — Test methods and requirements — Technical Corrigendum 1
Road vehicles — Spark-plugs — Test methods and requirements — Technical Corrigendum 1
Véhicules routiers — Bougies d'allumage — Méthodes d'essai et exigences — Rectificatif technique 1
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL STANDARD ISO 11565:2006
TECHNICAL CORRIGENDUM 1
Published 2007-09-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Road vehicles — Spark-plugs — Test methods and
requirements
TECHNICAL CORRIGENDUM 1
Véhicules routiers — Bougies d'allumage — Méthodes d'essai et exigences
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to ISO 11565:2006 was prepared by Technical Committee ISO/TC 22, Road
vehicles, Subcommittee SC 1, Ignition equipment.
Page 5, subclause 3.5.1
Replace paragraph 3 with the following text:
If the test fixture seat is not of an alloy, it shall have a hardness of HRC 20 or greater. The surface roughness
across the seating surface shall be Ramax 0,2 µm. To cover wear of the seating surface during several tests
the spark-plug manufacturer may test with a seating surface of Ramax 0,8 µm. All threads shall be free of
lubricants.
ICS 43.060.50 Ref. No. ISO 11565:2006/Cor.1:2007(E)
© ISO 2007 – All rights reserved
Published in Switzerland
ISO 11565:2006/Cor.1:2007(E)
Replace Table 2 by the following table:
Table 2 — Installa
...
NORME INTERNATIONALE ISO 11565:2006
RECTIFICATIF TECHNIQUE 1
Publié 2007-09-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Véhicules routiers — Bougies d'allumage — Méthodes d'essai
et exigences
RECTIFICATIF TECHNIQUE 1
Road vehicles — Spark-plugs — Test methods and requirements
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à l'ISO 11565:2006 a été élaboré par le comité technique ISO/TC 22, Véhicules
routiers, sous-comité SC 1, Équipement d'allumage.
Page 5, paragraphe 3.5.1
Dans le troisième alinéa, remplacer «Ra maximal» par «Ramax» et remplacer la valeur «1,6 µm» par
«0,8 µm».
o
ICS 43.060.50 Réf. n ISO 11565:2006/Cor.1:2007(F)
Publié en Suisse
ISO 11565:2006/Cor.1:2007(F)
Remplacer le Tableau 2 existant par le suivant:
Tableau 2 — Couple d'installation
Installation du couple dans le dispositif d’essai
a
(valeurs d’ajustement de l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.