ISO 18902:2013
(Main)Imaging materials — Processed imaging materials — Albums, framing and storage materials
Imaging materials — Processed imaging materials — Albums, framing and storage materials
ISO 18902:2013 specifies the principal physical and chemical requirements for album, storage and framing materials to prevent damage to processed or printed imaging materials over time. It covers requirements for: paper and paperboard; plastics; metals; writing instruments; adhesives; tapes; self-adhesive labelling materials; stamping inks and pads; framing and glazing materials used as, or in the construction of, storage and display materials for black-and-white or colour reflection prints or negatives made with traditional silver-halide and silver dye bleach photographic materials; dye- and pigment-based inkjet, dye diffusion thermal transfer ("dye sublimation"), and liquid- and dry-toner electrophotographic digital prints.
Matériaux pour image — Matériaux pour image après traitement — Albums, cadrage et matériaux d'archivage
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 18902
Third edition
2013-07-01
Imaging materials — Processed
imaging materials — Albums, framing
and storage materials
Matériaux pour image — Matériaux pour image après traitement —
Albums, cadrage et matériaux d’archivage
Reference number
ISO 18902:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO 18902:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 18902:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials . 2
4.1 Paper and board . 2
4.2 Plastic . 3
4.3 Metal . 4
4.4 Adhesives . 4
4.5 Writing, labelling and printing materials . 5
4.6 Glazing . 5
4.7 Frames . 5
5 Reporting . 6
Annex A (informative) Envelope seams . 7
Annex B (informative) Slip agents . 8
Bibliography . 9
© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 18902:2013(E)
Foreword
ISO (the International Organization for Standardizatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.