iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 2505-2:1994/Cor 1:1997

(Corrigendum)

Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters - Technical Corrigendum 1

Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters - Technical Corrigendum 1

Tubes en matières thermoplastiques — Retrait longitudinal à chaud — Partie 2: Paramètres de détermination — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
14-May-1997
Withdrawal Date
14-May-1997
ICS
23.040.20 - Plastics pipes
Technical Committee
ISO/TC 138/SC 5 - General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
Drafting Committee
ISO/TC 138/SC 5 - General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
Current Stage
9599 - Withdrawal of International Standard
Start Date
25-May-2005
Completion Date
13-Dec-2025
Ref Project

Relations

Consolidated By
ISO 12543-1:2011 - Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts
Effective Date
06-Jun-2022
Corrects
ISO 2505-2:1994 - Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters
Effective Date
06-Jun-2022
Revised
ISO 2505:2005 - Thermoplastics pipes - Longitudinal reversion - Test method and parameters
Effective Date
15-Apr-2008
Child
SIST ISO 2505-2:1995 - Thermoplastics pipes -- Longitudinal reversion -- Part 2: Determination parameters
Effective Date
12-May-2008
Child
ISO 2505-2:1994 - Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters
Effective Date
15-Apr-2008
ISO 2505-2:1994/Cor 1:1997ISO 2505-2:1994/Cor 1:1997
PreviousNext
Standard
ISO 2505-2:1994/Cor 1:1997
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2505-2:1994/Cor 1:1997ISO 2505-2:1994/Cor 1:1997
PreviousNext
Standard
ISO 2505-2:1994/Cor 1:1997
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 2505-2:1994/Cor 1:1997ISO 2505-2:1994/Cor 1:1997
PreviousNext
Standard
ISO 2505-2:1994/Cor 1:1997
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 2505-2:1994/Cor 1:1997 is a standard published by the International Organization for Standardization (ISO). Its full title is "Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters - Technical Corrigendum 1". This standard covers: Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters - Technical Corrigendum 1

Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters - Technical Corrigendum 1

ISO 2505-2:1994/Cor 1:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 2505-2:1994/Cor 1:1997 has the following relationships with other standards: It is inter standard links to ISO 12543-1:2011, ISO 2505-2:1994, ISO 2505:2005; is excused to SIST ISO 2505-2:1995, ISO 2505-2:1994. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 2505-2:1994/Cor 1:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


INTERNATIONAL STANDARD IS0 2505-2:1994
TECHNICAL CORRIGENDUM 1
Published 1997-05-I 5
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEWYHAPORHAR OPrAHM3AlJM5l I-IO CTAHjjAPTM3AlJMM. ORGANISATION INTERNATIONALE DE NORMALISATION
Thermoplastics pipes - Longitudinal reversion -
Part 2:
Determination parameters
TECHNICAL CORRIGENDUM 1
Tubes en mat&es thermoplastiques - Retrait longitudinal 2 chaud -
Partie 2: Paramktres de dktermination
RECTIFICATIF TECHNIQUE I
Technical Corrigendum 1 to International Standard IS0 25052:1994 was prepared by Technical Committee
ISOTTC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, Genera/ properties of
pipes,
...


NORME INTERNATIONALE ISO 2505-2:1994
RECTIFICATIF TECHNIQUE 1
Publié 1997-05-I 5
.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION . MEXJJVHAPOnHAfl OPrAHM3AUWl l-l0 CTAHflAPTM3AUMM. ORGANISATION INTERNATIONALE DE NORMALISATION
Tubes en matières thermoplastiques - Retrait longitudinal
à chaud -
Partie 2:
Paramètres de détermination
RECTIFICATIF TECHNIQUE 1
Thermoplastics pipes - Longitudinal reversion -
Part 2: Determination parameters
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à la Norme internationale ISO 25052:1994 a été élaboré par le comité technique
ISO/TC 138, Tubes, raccords et robinetterie en matières plastiques pour le transporf des fluides, sous-comité SC 5,
Propriétés générales des tubes, r
...


NORME INTERNATIONALE ISO 2505-2:1994
RECTIFICATIF TECHNIQUE 1
Publié 1997-05-I 5
.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION . MEXJJVHAPOnHAfl OPrAHM3AUWl l-l0 CTAHflAPTM3AUMM. ORGANISATION INTERNATIONALE DE NORMALISATION
Tubes en matières thermoplastiques - Retrait longitudinal
à chaud -
Partie 2:
Paramètres de détermination
RECTIFICATIF TECHNIQUE 1
Thermoplastics pipes - Longitudinal reversion -
Part 2: Determination parameters
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à la Norme internationale ISO 25052:1994 a été élaboré par le comité technique
ISO/TC 138, Tubes, raccords et robinetterie en matières plastiques pour le transporf des fluides, sous-comité SC 5,
Propriétés générales des tubes, r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 18488:2025(Main)
Polyethylene (PE) materials for piping systems - Determination of strain hardening modulus in relation to slow crack growth - Test method

This document specifies a method for the determination of the strain hardening modulus, which is used as a measure for the resistance to slow crack growth of polyethylene. This document specifies how to obtain a strain hardening modulus measurement from “true stress vs. draw ratio” curves on compression moulded samples. Details of the necessary equipment, precision and sample preparation for the generation of data are given. This document provides a method that is valid for all types of polyethylene, independent from the manufacturing technology, comonomer or catalyst type used for pipes and fittings applications.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 24033:2025(Main)
Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength

This document specifies the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on pipes made of a) polyethylene of raised temperature resistance (PE-RT) type I, and b) polyethylene of raised temperature resistance (PE-RT) type II.

  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 8149:2025(Main)
Unplasticized polyamide (PA-U) pipes - Effect of time and temperature on the expected strength

This document specifies the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on unplasticized polyamide (PA-U 180) extruded pipes. NOTE 1 PA-U 180 follows ISO 16486-1 in terms of minimum strength values and covers both PA-U11 180 and PA-U12 180. NOTE 2 As there is not test data available for other types of polyamide (e.g. PA-U 160) this document does not currently contain appropriate reference lines for these materials. Future revisions will include other types of polyamide when sufficient test data becomes available.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 18553:2025(Main)
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

This document describes a method with two procedures for the assessment of carbon black or pigment particle and agglomerate size, and the rating of dispersion in polyolefin pipes, fittings and compounds. The method is applicable to polyolefin pipes and fittings, as well as raw material in pellet form, with the choice of procedure to be determined by the referring specification. The method is applicable to carbon black or pigmented polyolefin pipes, fittings and compounds with a carbon black content of less than 3 % by weight, and pigment content of less than 5 % by weight.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO/TS 24399:2025(Main)
Thermoplastic pipes for the conveyance of fluids - Inspection of polyethylene butt fusion joints using time of flight diffraction testing

This document describes the time of flight diffraction (TOFD) testing of polyethylene butt fusion (BF) joints, including pipe-to-pipe, pipe-to-fitting and fitting-to-fitting joints, used for the conveyance of fluids. This document provides a test to detect imperfections such as voids, inclusions, lack of fusions, misalignment and particulate contamination in the BF joints. The document only applies to polyethylene pipes and fittings without a barrier to ultrasonic waves. This document also provides requirements for procedure qualification and guidance for personnel qualifications, which are essential for applying this test technique. This document covers the equipment, the preparation and performance of the test, the indication assessment and the reporting for polyethylene BF joints. Acceptance criteria are not covered in this document. NOTE 1 At present, laboratory experiences exist on the use of TOFD for polyethylene butt fusion joints and/or reference blocks of wall thickness between 8 mm to 100 mm.[1][2][3][4][5][6] Field experience on butt fusion joints in high density polyethylene (HDPE) pipes has been reported.[7] NOTE 2 Interlaboratory testing has shown that TOFD is a viable method for enhancing the integrity assessment of butt fusion joints.[13]

  • Technical specification
    21 pages
    English language
    sale 15% off
ISO
ISO/TS 22499:2024(Main)
Thermoplastic pipes for the conveyance of fluids - Inspection of polyethylene butt fusion joints using phased array ultrasonic testing

This document describes the phased array ultrasonic testing (PAUT) of polyethylene butt fusion (BF) joints, including pipe-to-pipe, pipe-to-fitting and fitting-to-fitting joints, used for the conveyance of fluids. This document provides a test, whereby the presence of imperfections such as voids, inclusions, lack of fusions, misalignment and particulate contamination in the BF joints can be detected. The document is only applicable to polyethylene pipes and fittings without a barrier to ultrasonic waves. This document also provides requirements for procedure qualification and guidance for personnel qualifications, which are essential for the application of this test technique. This document also covers the equipment, the preparation and performance of the test, the indication assessment and the reporting for polyethylene BF joints. Acceptance criteria are not covered in this document.

  • Technical specification
    20 pages
    English language
    sale 15% off
ISO
ISO/TS 16943:2023(Main)
Thermoplastic pipes for the conveyance of fluids - Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing

This document describes phased array ultrasonic testing (PAUT) of polyethylene electrofusion (EF) socket joints used for the conveyance of fluids. This document provides a test whereby the presence of imperfections such as voids, wire dislocation, misalignment, pipe under-penetration, particulate contamination and lack of fusion in electrofusion socket joints can be detected. The technique is only applicable to polyethylene electrofusion socket fittings without a barrier to ultrasonic waves. This document also provides requirements for procedure qualification and guidance for personnel qualifications, which are essential for the application of this test technique. This document covers the test equipment, the preparation and performance of the test, the assessment of indications and the reporting for polyethylene EF joints. Acceptance criteria are not covered in this document. NOTE 1 At the time of publication, experience only exists in the use of PAUT for polyethylene (PE80 and PE100) electrofusion socket joint sizes between 90 mm and 710 mm (SDR 11 and 17).[1][2][3][4][5][6][7] NOTE 2 Interlaboratory testing has shown that PAUT is a viable method for enhancing the integrity assessment of electrofusion joints.[8][15][16] NOTE 3 This document does not apply to the detection of unscraped pipe. Such detection can be achieved by simple visual testing, provided mechanical scraping tools are employed. NOTE 4 PAUT techniques for cold fusion detection are known to be available. However further research verification and experience are needed to transfer the technique into an ISO International Standard. This document does not provide any information regarding the detection of cold fusions.

  • Technical specification
    25 pages
    English language
    sale 15% off
ISO
ISO 2505:2023(Main)
Thermoplastics pipes - Longitudinal reversion - Test method and parameters

This document specifies a method for determining the longitudinal reversion of thermoplastics pipes, to be carried out in either a liquid or in air. In case of dispute, heated liquid is used as the reference. This document is applicable to all thermoplastics pipes with smooth internal and external walls of constant cross‑section. It is not applicable to non‑smooth structured‑wall thermoplastics pipes. The parameters appropriate to the pipe material and recommendations for the maximum levels of reversion as a function of the pipe material are given in Annex A. This method is applicable for pipes of wall thickness ≤ 16 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 9854-2:2023(Main)
Thermoplastics pipes for the transport of fluids - Determination of Charpy impact properties - Part 2: Test conditions for pipes of various materials

This document specifies the values or options chosen for the test parameters (i.e. the impact energy, specimen dimensions, specimen type, specimen supports and test temperature) for both unnotched and notched specimens, for testing the impact resistance (pendulum method) of thermoplastics pipes of the following materials, in accordance with ISO 9854-1. It applies to pipes made of unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile/butadiene/styrene (ABS), acrylonitrile/styrene/acrylate (ASA), propylene homopolymer (PP-H), propylene impact polymer (PP-B), propylene random copolymer (PP-R), propylene random copolymer with modified crystallinity (PP-RCT), and polyethylene (PE).

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 9854-1:2023(Main)
Thermoplastics pipes for the transport of fluids - Determination of Charpy impact properties - Part 1: General test method

This document specifies two general test methods, Method A and Method B, to be used for the determination of the impact properties of unnotched and notched specimens cut from thermoplastics pipes for the transport of fluids. - Method A: unnotched method, for unnotched specimens cut from thermoplastics pipes for the transport of fluids. - Method B: notched method, for specimens cut from thermoplastics pipes for the transport of fluids, into which a notch has been machined. The use of Method A or Method B is determined by the relevant product standards. This document is not intended as a reference test method for the determination of the impact strength of pipes. ISO 3127, relating to the determination of the impact strength of pipes by means of a falling mass, is the reference test method. However, this document can be used for scientific research, materials testing or the examination of pipe when it is not possible to take measurements in accordance with the reference method. This document can be applied to either isolated batches or continuous production of pipe.

  • Standard
    12 pages
    English language
    sale 15% off