ISO/IEC 8473-1:1994/Amd 3:1996
(Amendment)Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - Amendment 3: Record Route Timestamps
Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - Amendment 3: Record Route Timestamps
Technologies de l'information — Protocole assurant le service réseau en mode sans connexion: Spécification du protocole — Amendement 3: Horodatage de l'enregistrement du routage
General Information
Relations
Frequently Asked Questions
ISO/IEC 8473-1:1994/Amd 3:1996 is a standard published by the International Organization for Standardization (ISO). Its full title is "Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - Amendment 3: Record Route Timestamps". This standard covers: Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - Amendment 3: Record Route Timestamps
Information technology - Protocol for providing the connectionless-mode network service: Protocol specification - Amendment 3: Record Route Timestamps
ISO/IEC 8473-1:1994/Amd 3:1996 is classified under the following ICS (International Classification for Standards) categories: 35.100.30 - Network layer. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO/IEC 8473-1:1994/Amd 3:1996 has the following relationships with other standards: It is inter standard links to ISO/IEC 8473-1:1994, ISO/IEC 8473-1:1998; is excused to ISO/IEC 8473-1:1994. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO/IEC 8473-1:1994/Amd 3:1996 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL
ISO/IEC
STANDARD
8473-l
First edition
1994-07-I 5
AMENDMENT 3
1996-l 2-l 5
Information technology - Protocol for
providing the connectionless-mode
network service: Protocol specification
AMENDMENT 3: Record Route Timestamps
Technologies de /‘information - Protocole assurant le service rbseau en
mode sans connexion: Spbcifica tion du pro tocole
AMENDEMENT 3: Enregistrement des temps
Reference number
GO/I EC 8473-l : 1994/Amd.3: 1996(E)
ISWIEC 8473-l: 1994/Amd.3: 1996(E)
Contents
Page
Subclause 6.15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.
1)
Subclause 7.5.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2)
0 ISO/IEC 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or
utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH- 1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
0 ISO/IEC ISO/IEC 8473-l: 1994/Amd.3: 1996(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the Inter-
national Electrotechnical Commission) form the specialized system for worldwide
standardization. National bodies that are members of IS0 or IEC participate in the
development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity.
IS0 and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with
IS0 and IEC, also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the
joint technical committee are circulated to national bodies for voting. Publication
as an International Standard requires approval by at least 75 % of the national
bodies casting a vote.
Amendment 3 to International Standard ISO/IEC 8473-l: 1994 was prepared by
Joint Technical Committee ISO/IEC JTC 1, Information technology, Sub-
committee SC 6, Telecommunications and information exchange between systems,
in collaboration with ITU-T. The identical text is published as ITU-T Rec.
X.233/Amd.3.
. . .
Ill
ISO/IEC 8473-l: 1994/Amd.3: 1996(E)
0 ISO/IEC
Introduction
This amendment to ITU-T Rec. X.233 I ISO/IEC 8473-l adds features to the protocol that support record route
the ability to associate a timestamp with each Network Entity Title in the “recording of route” option.
timestamps -
iv
ISO/IEC 8473-l : 1994lAmd.3 : 1996 (E)
INTERNATIONAL STANDARD
ITU-T RECOMMENDATION
INFORMATION TECHNOLOGY - PROTOCOL FOR PROVIDING
THE CONNECTIONLESS-MODE NETWORK SERVICE:
PROTOCOL SPECIFICATION
AMENDMENT 3
Record Route Timestamps
Subclause 6.15
1)
Replace the text of 6.15, in its entirety, with the following:
“The record route function records the path taken by a PDU as it traverses a series of intermediate systems, and
optionally also records timing information. A recorded route consists of a list of entries held in a parameter within the
options part of the PDU header. Each entry consists of either a Network entity title, or a timestamp followed by a
Network entity title: in addition, the first entry in a timestamped list can consist of a timestamp without a Network
entity title, inserted by the originator of the PDU. The length of this parameter is determined by the originating
Network entity, and does not change during the lifetime of the PDU.
The list is constructed as the PDU is forwarded along a path towards its destination. The originator of the PDU shall
either initialize the list as empty, or insert an initial entry containing a timestamp and no Network entity title: the
originator is not required to insert such an initial entry in a timestamped list. All octets in the list, other than an initial
timestamp entry when present, shall be initialized to zero. Subsequently, only entries corresponding to intermediate
system
...
INTERNATIONAL
ISO/tEC
STANDARD 8473-1
First edition
1994-07-1 5
AMENDMENT 3
1996-1 2-1 5
Information technology - Protocol for
providing the connectionless-mode
network service: Protocol specification
AMENDMENT 3: Record Route Timestamps
Technologies de l'information - Protocole assurant le service réseau en
mode sans connexion: Spécification du protocole
AMENDEMENT 3: Enregistrement des temps
Reference number
ISO/IEC 8473-1 :1994/Amd,3:1996(E)
ISOnEC 8473-1:1994/Amd.3:1996(E)
Contents
Page
1) Subclause 6.15 . 1
2) Subclause 7.5.5 2
...............................................................................................................................................
O ISO/IEC 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or
utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office Case postale 56 CH-121 1 Genève 20 Switzerland
Printed in Switzerland
0 ISO/IEC ISOAEC 8473-1:1994/Amd.3:1996(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the Inter-
national Elecîrotechnical Commission) form the specialized system for worldwide
standardization. National bodies that are members of IS0 or IEC participate in the
development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity.
IS0 and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with
IS0 and IEC, also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the
joint technical committee are circulated to national bodies for voting. Publication
as an International Standard requires approval by at least 75 % of the national
bodies casting a vote.
Amendment 3 to International Standard ISO/IEC 8473- 1: 1994 was prepared by
Joint Technical Committee ISO/IEC JTC 1, Znformation technology, Sub-
committee SC 6, Telecommunications and information exchange between systems,
in collaboration with ITU-T. The identical text is published as ITU-T Rec.
X.233lAmd.3.
a
iii
ISOfiEC 8473-1:1994/Amd.3: 1996(E)
O ISO/IEC
Introduction
This amendment to ITU-T Rec. X.233 I ISOLEC 8473-1 adds features to the protocol that support record route
timestamps - the ability to associate a timestamp with each Network Entity Title in the “recording of route” option.
iv
ISOfiEC 8473-1 : 1994/Amd.3 : 1996 (E)
INTERNATIONAL STANDARD
ITU-T RECOMMENDATION
INFORMATION TECHNOLOGY - PROTOCOL FOR PROVIDING
THE CONNECTIONLESS-MODE NETWORK SERVICE:
PROTOCOL SPECIFICATION
AMENDMENT 3
Record Route Timestamps
01) Subclause 6.15
Replace the text of 6.15, in its entirety, with the following:
“The record route function records the path taken by a PDU as it traverses a series of intermediate systems, and
optionally also records timing information. A recorded route consists of a list of entries held in a parameter within the
options part of the PDU header. Each entry consists of either a Network entity title, or a timestamp followed by a
Network entity title: in addition, the first entry in a timestamped list can consist of a timestamp without a Network
entity title, inserted by the originator of the PDU. The length of this parameter is determined by the originating
of the PDU.
Network entity, and does not change during the lifetime
The list is constructed as the PDU is forwarded along a path towards its destination. The originator of the PDU shall
either initialize the list as empty, or insert an initial entry containing a timestamp and no Network entity title: the
originator is not required to insert such an initiai entry in a timestamped list. All octets in the list, other than an initial
timestamp entry when present, shall be initialized to zero. Subsequently, only entries corresponding to intermediate
system Network entities shall be included in the recorded route.
When an intermediate system Ne
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...