ISO 14322:2018

INTERNATIONAL ISO
STANDARD 14322
Second edition
2018-07
Plastics — Epoxy resins —
Determination of degree of
crosslinking of crosslinked epoxy
resins by differential scanning
calorimetry (DSC)
Plastiques — Résines époxydes — Détermination du degré
de réticulation des résines époxydes réticulées par analyse
calorimétrique différentielle (DSC)
Reference number
ISO 14322:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 14322:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14322:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Materials . 3
6 Apparatus . 3
7 Procedure. 3
7.1 Calibration . 3
7.2 Preliminary test . 4
7.2.1 General. 4
7.2.2 Procedure for preliminary test . 4
7.3 DSC measurement on the crosslinked resin under investigation . 4
8 Expression of results . 5
9 Precision . 5
9.1 General . 5
9.2 Materials and crosslinking conditions .
...