ISO/R 93-3:1969

UDC 677.051 : 621.869.88-182.3
Ref. No. : ISO/R 93/111-1969 (E)
IS0
I NT ER NAT1 ON AL ORGAN 12 AT1 ON FOR STAND AR 0 I ZATl ON
IS0 RECOMMENDATION
R 93/lIl
CYLINDRICAL SLIVER CANS ON CASTORS
1st EDITION
April 1969
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Copies to be obtained through the national standards organizations.
Also issued in French and Russian.

---------------------- Page: 1 ----------------------
ISO/R 93/111-1969 (E)
IS0 Recommendation R 93/111 April 1969
CYLINDRICAL SLIVER CANS ON CASTORS
I. SCOPE
This IS0 Recommendation fixes the main dimensions of cylindrical sliver cans on castors.
2. DIMENSIONS
d
d =Inside diameter of the can
dl =Outside maximum diameter of base
dz =Inside diameter of recess
d3 =Turning circle of castors
h =Overall height with castors
I I
I
I
1
NOTE. - The figure shows a can with 3 castors,
but it is possible to produce cans fitted with
4 castors, particularly for inside diameters above
700 mm.
dl
4
FIGURE
-2-

---------------------- Page: 2 ----------------------
Dimensions in millimetres
Conversion table
-
1
d h
d2 d3
in in
mm
-
-
400 415 385 280
16 406.4
900 36
914.4
600 615 585 480
24 609.6
- -
400 415 385 280
16 406.4
450 465 435 330 18 457.2
500
515 485 380 20 508.0
600 585 480
615 1000 24 609.6 40
1016.0
700 715 685 580
28 71 1.2
750" 765 735 630 30 762.0
800 815 785 680 32 812.8
385 280
400" 415 16 406.4
~
450" 465 435 330 18 457.2
500" 515 485 380 20 508.0
1070 42 1066.8
24 609.6
600" 615 585 480
700" 685 580 28 71 1.2
715
800" 815 785 680 32 8 12.8
- -
450 465 435 330 18 457.2
500 515 485 380 2
...