ISO 16187:2025
(Main)Footwear and footwear components — Test method to assess antibacterial activity
Footwear and footwear components — Test method to assess antibacterial activity
This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and footwear components. This document is applicable to all types of footwear and footwear components employing non-diffusing antibacterial treatments.
Chaussure et composants de chaussure — Méthode d'essai pour évaluer l'activité antibactérienne
Le présent document spécifie des méthodes d’essai quantitatives permettant d’évaluer l’activité antibactérienne de chaussures et de leurs composants. Le présent document s’applique à tous les types de chaussures et de composants de chaussure faisant l’objet de traitements antibactériens non migrants.
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 16187
Second edition
Footwear and footwear
2025-02
components — Test method to
assess antibacterial activity
Chaussure et composants de chaussure — Méthode d'essai pour
évaluer l'activité antibactérienne
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Safety . 2
6 Apparatus . 2
7 Reagents and culture medium . 2
7.1 General .2
7.2 Water .3
7.3 Nutrient broth (NB) .3
7.3.1 Composition .3
7.3.2 Preparation .3
7.4 Nutrient agar (NA) .3
7.4.1 Composition .3
7.4.2 Preparation .3
7.5 Tryptic soy broth (TSB) .4
7.5.1 Composition .4
7.5.2 Preparation .4
7.6 Tryptone soy agar (TSA) .4
7.6.1 Composition .4
7.6.2 Preparation .4
7.7 Soybean casein digest broth with lecithin and polyoxyethylene medium (SCDLP) .4
7.7.1 Composition .4
7.7.2 Preparation .5
7.8 Sodium chloride solution (physiological saline).5
7.8.1 Composition .5
7.8.2 Preparation .5
8 Test microorganisms . 5
8.1 Test strains.5
8.2 Storage of strains .5
9 Preparation of test inoculums . 6
10 Preparation of test samples . 6
10.1 General .6
10.2 Test specimen .6
10.3 Pre-treatment of the test specimen .6
11 Test procedure . 6
12 Expression of results . 7
12.1 Calculation of the number of viable bacteria .7
12.2 Judgement of test effectiveness .7
12.3 Calculation of antibacterial activity ratio .8
13 Test report . 8
Annex A (normative) Static challenge test .10
Annex B (normative) Film contact method .11
Annex C (normative) Dynamic challenge test.13
Bibliography . 14
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 216, Footwear, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 309, Footwear, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 16187:2013), which has been technically
revised.
The main changes are as follows:
— a new term “neutralizer” and its definition have been added;
— a new Clause 4 has been added;
— AS No. has been revised to CGMCC No.;
— the light intensity of UV lamp has been added;
— the normative references and bibliography have been revised and updated;
— TSA and TSB have been added as alternative culture medium if NA and NB are not available;
— Annex D has been deleted.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
International Standard ISO 16187:2025(en)
Footwear and footwear components — Test method to assess
antibacterial activity
CAUTION — Test methods specified in this document require the use of bacteria. These tests shall
only be carried out in facilities with containment techniques for handling microorganisms and by
persons with training and experience in the use of microbiological techniques.
1 Scope
This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and
footwear components.
This document is applicable to all types of footwear and footwear components employing non-diffusing
antibacterial treatments.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this do
...
Norme
internationale
ISO 16187
Deuxième édition
Chaussure et composants de
2025-02
chaussure — Méthode d'essai pour
évaluer l'activité antibactérienne
Footwear and footwear components — Test method to assess
antibacterial activity
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2025
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe. 2
5 Sécurité . 2
6 Appareillage . 2
7 Réactifs et milieu de culture . 3
7.1 Généralités .3
7.2 Eau .3
7.3 Bouillon nutritif (NB) .3
7.3.1 Composition .3
7.3.2 Préparation .3
7.4 Gélose nutritive (NA) .4
7.4.1 Composition .4
7.4.2 Préparation .4
7.5 Bouillon tryptone soja (TSB) .4
7.5.1 Composition .4
7.5.2 Préparation .4
7.6 Gélose tryptone soja (TSA) .5
7.6.1 Composition .5
7.6.2 Préparation .5
7.7 Bouillon d’hydrolysats de caséine et de soja avec lécithine et polyoxyéthylène (SCDLP) .5
7.7.1 Composition .5
7.7.2 Préparation .5
7.8 Solution de chlorure de sodium (sérum physiologique) .6
7.8.1 Composition .6
7.8.2 Préparation .6
8 Micro-organismes d’essai . 6
8.1 Souches d’essai.6
8.2 Conservation des souches . .6
9 Préparation des inoculums d’essai . 6
10 Préparation des échantillons pour essai . 7
10.1 Généralités .7
10.2 Éprouvette .7
10.3 Prétraitement de l’éprouvette . .7
11 Mode opératoire d’essai . 7
12 Expression des résultats . 8
12.1 Calcul du nombre de bactéries viables .8
12.2 Évaluation de l’efficacité de l’essai .8
12.3 Calcul du taux d’activité antibactérienne .9
13 Rapport d’essai . 9
Annexe A (normative) Test d’épreuve statique .11
Annexe B (normative) Méthode du film de contact .12
Annexe C (normative) Test d’épreuve dynamique . 14
Bibliographie .15
iii
Avant propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux
de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité
de tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l’ISO n’avait
pas reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application.
Toutefois, il y a lieu d’avertir les responsables de la mise en application du présent document que des
informations plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à
l’adresse www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou
partie de tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de
l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir www.iso.org/iso/fr/avant-propos.html.
Le présent document a été élaboré par le comité technique ISO/TC 216, Chaussure, en collaboration avec
le comité technique CEN/TC 309, Chaussure, du Comité européen de normalisation (CEN), conformément à
l’Accord de coopération technique entre l’ISO et le CEN (Accord de Vienne).
Cette deuxième édition annule et remplace la première édition (ISO 16187:2013), qui a fait l’objet d’une
révision technique.
Les principales modifications sont les suivantes:
— ajout d’un nouveau terme, «neutralisant», et de sa définition;
— ajout d’un nouvel Article 4;
— remplacement de la référence AS par la référence CGMCC;
— ajout de l’intensité lumineuse d’une lampe à rayons UV;
— révision et mise à jour des références normatives et de la bibliographie;
— ajout d’autres milieux de culture, la gélose tryptone soja (TSA) et le bouillon tryptone soja (TSB), à utiliser
en cas d’indisponibilité de la gélose nutritive (NA) et du bouillon nutritif (NB);
— suppression de l’Annexe D.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.
iv
Norme internationale ISO 16187:2025(fr)
Chaussure et composants de chaussure — Méthode d'essai
pour évaluer l'activité antibactérienne
ATTENTION — Les méthodes d’essai spécifiées dans le présent document nécessitent l’utilisation
de bactéries. Ces essais doivent être réalisés exclusivement dans des installations comportant des
dispositifs de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.